[DeTomaso] Vacuum source on IR manifolds
Forest Goodhart
forestg at att.net
Sat May 26 10:56:00 EDT 2018
See attached photo. This manifold for sale by the way.
Forest
From: Robert Stroj <npdrs at maui.net>
To: detomaso at server.detomasolist.com
Sent: Friday, May 25, 2018 10:28 PM
Subject: [DeTomaso] Vacuum source on IR manifolds
Hi, I am in process of installing IR fuel injection, using Fast Xfi 2.0.
Would like to hear from someone running similar setup how did you plumb vacuum source manifold.
Was planning to use just one common manifold (connected to all 8 runners) and then connect servo brake tube, MAP sensor and vacuum regulated fuel pressure regulator all to that manifold.
Would that work fine or will signal from MAP get wrong readings when breaking (booster maybe reducing vacuum)?
If this is fine, is there some rule on how to size this manifold?
Thanks, Robert
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
See attached photo. This manifold for sale by the way.
Forest
__________________________________________________________________
From: Robert Stroj <npdrs at maui.net>
To: detomaso at server.detomasolist.com
Sent: Friday, May 25, 2018 10:28 PM
Subject: [DeTomaso] Vacuum source on IR manifolds
Hi, I am in process of installing IR fuel injection, using Fast Xfi
2.0.
Would like to hear from someone running similar setup how did you plumb
vacuum source manifold.
Was planning to use just one common manifold (connected to all 8
runners) and then connect servo brake tube, MAP sensor and vacuum
regulated fuel pressure regulator all to that manifold.
Would that work fine or will signal from MAP get wrong readings when
breaking (booster maybe reducing vacuum)?
If this is fine, is there some rule on how to size this manifold?
Thanks, Robert
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: weber2.jpg
Type: image/jpeg
Size: 64719 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20180526/bfe3bc32/attachment.jpg>
More information about the DeTomaso
mailing list