[DeTomaso] converting to factory ZF side mounts
Julian Kift
julian_kift at hotmail.com
Fri May 25 13:48:41 EDT 2018
Larry,
If opting for an upgrade consider the later removable tabs that the factory used on 9000 series cars, it make for a much easier removal of the ZF. The parts you require are relatively easy to fabricate IMO.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, May 25, 2018 10:36 AM
To: Email List Address For Posting
Subject: Re: [DeTomaso] converting to factory ZF side mounts
Mike,
Thanks for the quick reply, but….
The factory chassis brackets are …far… from just “two flat pieces of steel”. Did you study my photos?
And of course they are multiple pieces that were then welded to the larger chassis components, and would need to be removed by drilling out the spot welds.
Long shot, to be sure, but it never hurts to ask.
Anyone?
Larry
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Larry,
If opting for an upgrade consider the later removable tabs that the
factory used on 9000 series cars, it make for a much easier removal of
the ZF. The parts you require are relatively easy to fabricate IMO.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Friday, May 25, 2018 10:36 AM
To: Email List Address For Posting
Subject: Re: [DeTomaso] converting to factory ZF side mounts
Mike,
Thanks for the quick reply, but....
The factory chassis brackets are ...far... from just "two flat pieces
of steel". Did you study my photos?
And of course they are multiple pieces that were then welded to the
larger chassis components, and would need to be removed by drilling out
the spot welds.
Long shot, to be sure, but it never hurts to ask.
Anyone?
Larry
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list