[DeTomaso] Caliper rebuild kits...
Julian Kift
julian_kift at hotmail.com
Fri May 18 12:58:52 EDT 2018
It appears there are a few o-ring / seal wholesale suppliers in Portland/Beaverton, I'd pull an o-ring and go see if they can match it.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Steve Lisa <stevelisa at patentit.com>
Sent: Friday, May 18, 2018 9:51 AM
To: Mike Drew
Cc: List DeTomaso Forum
Subject: Re: [DeTomaso] Caliper rebuild kits...
Thanks....unfortunately we are just testing today. So I need it today. I
will overnight some for tomorrow as well (Larry Stock) already found me....
But the specs I have say 42.85 mm and 33.96 mm pistons. I (Google) have
found other modern vehicles with the same size pistons. What are the
chances I can piece some o-rings together???
Regards,
Steven G. Lisa, Esq.
Email: SteveLisa at PatentIt.com
Direct: 312-320-5888
Scottsdale Office | P: 480.535.6656 | F: 480.535.6628 | A: 7689 East
Paradise Lane, Suite 2, Scottsdale, AZ 85260
Chicago Office | P: 312.752.4357 | F:312.896.5633 | A: 55 E. Monroe
Street, Suite 3800, Chicago, IL 60603
www.PatentIt.com<http://www.PatentIt.com>
This email is intended only for the recipient above, and may contain
confidential and privileged information. If you received this email in
error, please destroy it and indicate such by return email to me. Thank
you.,
On May 18, 2018 09:38, "Mike Drew" <MikeLDrew at aol.com> wrote:
Steven,
Sadly, absolutely not. The Pantera front brake calipers were only used on
the Pantera, and the Fiat Dino coupe/Spyder. You won’t find those at Pep
Boys.
Pantera vendors carry them naturally, and can overnight a set to you so you
don’t have to be on the trailer...in fact many sell reman calipers which
would be faster to install, and then you could rebuild yours in a leisurely
manner and have them as spares....
Mike
Sent from my iPad
> On May 18, 2018, at 09:32, Steve Lisa <stevelisa at patentit.com> wrote:
>
> All, we are at PIR testing and sn5533 front calipers are leaking at the
> piston seals.A We have no spare o-rings or rebuild. Are there any
> common/close size o-rings that we can get an the auto part store that
> will work in the '73 front calipers?
> Regards,A
> Steven G. Lisa, Esq.A
> Email: SteveLisa at PatentIt.comA
> Direct:A 312-320-5888
> Scottsdale OfficeA |A P:A 480.535.6656A |A A F:A 480.535.6628A
> |A A A:A 7689 East Paradise Lane, Suite 2, Scottsdale, AZ 85260
> Chicago OfficeA |A P:A 312.752.4357A |A A F:312.896.5633A |A A A:A 55
> E. Monroe Street, Suite 3800, Chicago, IL 60603
> [1]www.PatentIt.com
> This email is intended only for the recipient above, and may contain
> confidential and privileged information. If you received this email in
> error, please destroy it and indicate such by return email to me. Thank
> you.
>
> References
>
> 1. http://www.PatentIt.com/
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
>
> Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
-------------- next part --------------
It appears there are a few o-ring / seal wholesale suppliers in
Portland/Beaverton, I'd pull an o-ring and go see if they can match it.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Steve Lisa <stevelisa at patentit.com>
Sent: Friday, May 18, 2018 9:51 AM
To: Mike Drew
Cc: List DeTomaso Forum
Subject: Re: [DeTomaso] Caliper rebuild kits...
Thanks....unfortunately we are just testing today. So I need it today.
I
will overnight some for tomorrow as well (Larry Stock) already found
me....
But the specs I have say 42.85 mm and 33.96 mm pistons. I (Google)
have
found other modern vehicles with the same size pistons. What are the
chances I can piece some o-rings together???
Regards,
Steven G. Lisa, Esq.
Email: SteveLisa at PatentIt.com
Direct: 312-320-5888
Scottsdale Office | P: 480.535.6656 | F: 480.535.6628 | A: 7689
East
Paradise Lane, Suite 2, Scottsdale, AZ 85260
Chicago Office | P: 312.752.4357 | F:312.896.5633 | A: 55 E. Monroe
Street, Suite 3800, Chicago, IL 60603
[1]www.PatentIt.com
This email is intended only for the recipient above, and may contain
confidential and privileged information. If you received this email in
error, please destroy it and indicate such by return email to me. Thank
you.,
On May 18, 2018 09:38, "Mike Drew" <MikeLDrew at aol.com> wrote:
Steven,
Sadly, absolutely not. The Pantera front brake calipers were only used
on
the Pantera, and the Fiat Dino coupe/Spyder. You won't find those at
Pep
Boys.
Pantera vendors carry them naturally, and can overnight a set to you so
you
don't have to be on the trailer...in fact many sell reman calipers
which
would be faster to install, and then you could rebuild yours in a
leisurely
manner and have them as spares....
Mike
Sent from my iPad
> On May 18, 2018, at 09:32, Steve Lisa <stevelisa at patentit.com> wrote:
>
> All, we are at PIR testing and sn5533 front calipers are leaking at
the
> piston seals.A We have no spare o-rings or rebuild. Are there any
> common/close size o-rings that we can get an the auto part store
that
> will work in the '73 front calipers?
> Regards,A
> Steven G. Lisa, Esq.A
> Email: SteveLisa at PatentIt.comA
> Direct:A 312-320-5888
> Scottsdale OfficeA |A P:A 480.535.6656A |A A F:A 480.535.6628A
> |A A A:A 7689 East Paradise Lane, Suite 2, Scottsdale, AZ 85260
> Chicago OfficeA |A P:A 312.752.4357A |A A F:312.896.5633A |A A
A:A 55
> E. Monroe Street, Suite 3800, Chicago, IL 60603
> [1]www.PatentIt.com
> This email is intended only for the recipient above, and may
contain
> confidential and privileged information. If you received this email
in
> error, please destroy it and indicate such by return email to me.
Thank
> you.
>
> References
>
> 1. [2]http://www.PatentIt.com/
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [3]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use
the links above.
>
> Members who post to this list grant license to the list to forward
any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
References
1. http://www.PatentIt.com/
2. http://www.PatentIt.com/
3. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list