[DeTomaso] Molded heater hose ID
Julian Kift
julian_kift at hotmail.com
Mon Mar 5 16:21:16 EST 2018
Mike,
I have no idea what you are doing that requires that length of hose? I assumed (obviously wrongly) you needed a 90 degree that comes off the heater tubes at the firewall to your shut off valves, that are then easily accessible under the car at the chassis rails where they triangulate.
Julian
________________________________
From: Mike Drew <MikeLDrew at aol.com>
Sent: Monday, March 5, 2018 1:09 PM
To: Julian Kift
Cc: Chuck and Linda Huber; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Molded heater hose ID
Julian,
Both those hoses are far too short. The original reference was for a 80417 which is 60 inches long, 3/4 inch diameter. After researching the Dayco site I found what we really need is the 80407 which is 60 inches long, 5/8 inch diameter. The 406, 405, 404 etc are progressively shorter.
Thanks!
Forest, I just saw your 80406 suggestion which might also work but it’s 48 inches long. I figure at under $10 each for the 60-inch version, why not get perhaps more than I need rather than perhaps not enough....
Mike
Sent from my iPad
On Mar 5, 2018, at 12:42, Julian Kift <julian_kift at hotmail.com<mailto:julian_kift at hotmail.com>> wrote:
Mike,
Why mess around trying to find a Dayco hose when you can just buy the correct Continental part #63812 for cheaper than you paid for the wrong Dayco part.... but if you must have the Dayco it looks to be part #80402 😉
Available from your official Amazon Pantera parts vendor.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com<mailto:detomaso-bounces at server.detomasolist.com>> on behalf of Mike Drew via DeTomaso <detomaso at server.detomasolist.com<mailto:detomaso at server.detomasolist.com>>
Sent: Monday, March 5, 2018 12:28 PM
To: Chuck and Linda Huber
Cc: DeTomaso Forum
Subject: Re: [DeTomaso] Molded heater hose ID
All,
I just opened my box of these Dayco 80417 hoses. They are 3/4 inch diameter. The Pantera uses 5/8 inch hoses.
Doh.
Just out of curiosity I tried them out, and they are a rattling loose fit. As wrong as can be.
Fortunately Amazon has a great return policy.
It would be interesting to know if Dayco sells the same hose in the proper size?
Mike
Sent from my iPad
> On Feb 19, 2018, at 17:33, Chuck and Linda Huber <lindahuber at cox.net<mailto:lindahuber at cox.net>> wrote:
>
> Don’t buy from O’Reilly
>
> Dayco 80417 $10.09 at Amazon.com<http://Amazon.com>.
[http://g-ec2.images-amazon.com/images/G/01/social/api-share/amazon_logo_500500._V323939215_.png]<http://amazon.com/>
Amazon.com: Online Shopping for Electronics, Apparel ...<http://amazon.com/>
amazon.com
Online shopping from the earth's biggest selection of books, magazines, music, DVDs, videos, electronics, computers, software, apparel & accessories, shoes, jewelry ...
>
> Going fast!
>
> Chuck
>
>
> <image001.png>
>
> From: B Hower [mailto:b.hower3400 at yahoo.com]
> Sent: Monday, February 19, 2018 8:31 AM
> To: 'Mike Drew'; 'DeTomaso Forum'; SOBill at aol.com<mailto:SOBill at aol.com>; Chuck and Linda Huber
> Subject: Re: [DeTomaso] Molded heater hose ID
>
> O'Reilly just quoted me 80417 at $ 27.36 and 80418 as being same as 80417.
>
>
> Bud #3400 ( Drive it like there is no tomorrow -- for there may not be ! )
>
>
> On Sunday, February 18, 2018, 4:16:41 PM CST, Chuck and Linda Huber <lindahuber at cox.net<mailto:lindahuber at cox.net>> wrote:
>
>
> Hose, Long, 90* at end - DAYCO 80417 or DAYCO 80418 $ 13.00
> Qty 2
>
> -----Original Message-----
> From: Mike Drew [mailto:MikeLDrew at aol.com]
> Sent: Saturday, February 17, 2018 6:52 PM
> To: DeTomaso Forum; SOBill at aol.com<mailto:SOBill at aol.com>
> Subject: [DeTomaso] Molded heater hose ID
>
> Guys,
>
> I am replacing the heater hoses (which were never hooked to the engine and
> are now 25 years old). The ones in the engine bay have a molded 90-degree
> end:
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com<mailto:DeTomaso at server.detomasolist.com>
> http://server.detomasolist.com/mailman/listinfo/detomaso
DeTomaso Info Page<http://server.detomasolist.com/mailman/listinfo/detomaso>
server.detomasolist.com<http://server.detomasolist.com>
This is the DeTomaso mailing list, a free and open forum for the discussion of issues surrounding all DeTomaso automobiles. This is an unmoderated mailing list ...
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Mike,
I have no idea what you are doing that requires that length of hose? I
assumed (obviously wrongly) you needed a 90 degree that comes off the
heater tubes at the firewall to your shut off valves, that are then
easily accessible under the car at the chassis rails where they
triangulate.
Julian
__________________________________________________________________
From: Mike Drew <MikeLDrew at aol.com>
Sent: Monday, March 5, 2018 1:09 PM
To: Julian Kift
Cc: Chuck and Linda Huber; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Molded heater hose ID
Julian,
Both those hoses are far too short. The original reference was for a
80417 which is 60 inches long, 3/4 inch diameter. After researching the
Dayco site I found what we really need is the 80407 which is 60 inches
long, 5/8 inch diameter. The 406, 405, 404 etc are progressively
shorter.
Thanks!
Forest, I just saw your 80406 suggestion which might also work but it's
48 inches long. I figure at under $10 each for the 60-inch version, why
not get perhaps more than I need rather than perhaps not enough....
Mike
Sent from my iPad
On Mar 5, 2018, at 12:42, Julian Kift <[1]julian_kift at hotmail.com>
wrote:
Mike,
Why mess around trying to find a Dayco hose when you can just buy the
correct Continental part #63812 for cheaper than you paid for the wrong
Dayco part.... but if you must have the Dayco it looks to be part
#80402
Available from your official Amazon Pantera parts vendor.
Julian
__________________________________________________________________
From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on behalf
of Mike Drew via DeTomaso <[3]detomaso at server.detomasolist.com>
Sent: Monday, March 5, 2018 12:28 PM
To: Chuck and Linda Huber
Cc: DeTomaso Forum
Subject: Re: [DeTomaso] Molded heater hose ID
All,
I just opened my box of these Dayco 80417 hoses. They are 3/4 inch
diameter. The Pantera uses 5/8 inch hoses.
Doh.
Just out of curiosity I tried them out, and they are a rattling loose
fit. As wrong as can be.
Fortunately Amazon has a great return policy.
It would be interesting to know if Dayco sells the same hose in the
proper size?
Mike
Sent from my iPad
> On Feb 19, 2018, at 17:33, Chuck and Linda Huber
<[4]lindahuber at cox.net> wrote:
>
> Don't buy from O'Reilly
>
> Dayco 80417 $10.09 at [5]Amazon.com.
[6][amazon_logo_500500._V323939215_.png]
[7]Amazon.com: Online Shopping for Electronics, Apparel ...
amazon.com
Online shopping from the earth's biggest selection of books, magazines,
music, DVDs, videos, electronics, computers, software, apparel &
accessories, shoes, jewelry ...
>
> Going fast!
>
> Chuck
>
>
> <image001.png>
>
> From: B Hower [[8]mailto:b.hower3400 at yahoo.com]
> Sent: Monday, February 19, 2018 8:31 AM
> To: 'Mike Drew'; 'DeTomaso Forum'; [9]SOBill at aol.com; Chuck and Linda
Huber
> Subject: Re: [DeTomaso] Molded heater hose ID
>
> O'Reilly just quoted me 80417 at $ 27.36 and 80418 as being same as
80417.
>
>
> Bud #3400 ( Drive it like there is no tomorrow -- for there may not
be ! )
>
>
> On Sunday, February 18, 2018, 4:16:41 PM CST, Chuck and Linda Huber
<[10]lindahuber at cox.net> wrote:
>
>
> Hose, Long, 90* at end - DAYCO 80417 or DAYCO 80418 $ 13.00
> Qty 2
>
> -----Original Message-----
> From: Mike Drew [[11]mailto:MikeLDrew at aol.com]
> Sent: Saturday, February 17, 2018 6:52 PM
> To: DeTomaso Forum; [12]SOBill at aol.com
> Subject: [DeTomaso] Molded heater hose ID
>
> Guys,
>
> I am replacing the heater hoses (which were never hooked to the
engine and
> are now 25 years old). The ones in the engine bay have a molded
90-degree
> end:
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [13]DeTomaso at server.detomasolist.com
> [14]http://server.detomasolist.com/mailman/listinfo/detomaso
[15]DeTomaso Info Page
[16]server.detomasolist.com
This is the DeTomaso mailing list, a free and open forum for the
discussion of issues surrounding all DeTomaso automobiles. This is an
unmoderated mailing list ...
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:julian_kift at hotmail.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:detomaso at server.detomasolist.com
4. mailto:lindahuber at cox.net
5. http://Amazon.com/
6. http://amazon.com/
7. http://amazon.com/
8. mailto:b.hower3400 at yahoo.com
9. mailto:SOBill at aol.com
10. mailto:lindahuber at cox.net
11. mailto:MikeLDrew at aol.com
12. mailto:SOBill at aol.com
13. mailto:DeTomaso at server.detomasolist.com
14. http://server.detomasolist.com/mailman/listinfo/detomaso
15. http://server.detomasolist.com/mailman/listinfo/detomaso
16. http://server.detomasolist.com/
More information about the DeTomaso
mailing list