[DeTomaso] Techno Question: Service life of poly-urethane bushings

Matt nwpantera at gmail.com
Sat Jun 30 22:57:52 EDT 2018


I figured as such. Probably not the cause of your issue but then I thought
how long are the brass bushings supposed to last?
Probably a long time I would guess, but not forever I'm thinking.
What is my point? I don't know but the little man in my head wants to know
everything.
Best of luck,
Matt

On Sat, Jun 30, 2018 at 7:22 PM, Charles Engles <cengles at cox.net> wrote:

> Dear Matt,
>
>
>
>              That was replaced almost thirty years ago.
>
>
>
>                                Warmest regards,  Chuck Engles
>
>
>
>
>
>
>
> *From:* Matt [mailto:nwpantera at gmail.com]
> *Sent:* Saturday, June 30, 2018 6:15 PM
> *To:* Charles Engles
> *Cc:* List DeTomaso Forum
> *Subject:* Re: [DeTomaso] Techno Question: Service life of poly-urethane
> bushings
>
>
>
> I'll ask the obvious question, has the plastic steering rack bushing ever
> been replaced?
>
> I'm no expert but it should be checked if you have right front "play"
> issues.
>
> Just a thought,
>
> Matt
>
>
>
>
>
> On Sat, Jun 30, 2018 at 2:57 PM, Charles Engles <cengles at cox.net> wrote:
>
>    Dear Forum,
>
>
>
>                                 I installed poly-urethane bushings about
>    18-20 years ago.   Now there seems to be a little bit of play in the
>    right front suspension without trauma or incident.  The amateur
>    mechanics here suggest that the poly-urethane bushings are the main
>    suspects.   Externally, they look fine.   The left side is tight.
>
>
>                                 So, rubber bushings go bad over time
>    (decades?).   Do poly-urethane bushings go bad over a similar time?
>    Is this a typical failure mode?
>
>
>
>                                             Warmest regards,  Chuck Engles
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
>
-------------- next part --------------
   I figured as such. Probably not the cause of your issue but then I
   thought how long are the brass bushings supposed to last?
   Probably a long time I would guess, but not forever I'm thinking.
   What is my point? I don't know but the little man in my head wants to
   know everything.A
   Best of luck,
   Matt

   On Sat, Jun 30, 2018 at 7:22 PM, Charles Engles <[1]cengles at cox.net>
   wrote:

   Dear Matt,

   A

   A A A A A A A A A A A A  That was replaced almost thirty years ago.A

   A

   A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A  Warmest
   regards,A  Chuck Engles

   A

   A

   A

   From: Matt [mailto:[2]nwpantera at gmail.com]
   Sent: Saturday, June 30, 2018 6:15 PM
   To: Charles Engles
   Cc: List DeTomaso Forum
   Subject: Re: [DeTomaso] Techno Question: Service life of poly-urethane
   bushings

   A

   I'll ask the obvious question, has the plastic steering rack bushing
   ever been replaced?A

   I'm no expert but it should be checked if you have right front "play"
   issues.

   Just a thought,

   Matt

   A

   A

   On Sat, Jun 30, 2018 at 2:57 PM, Charles Engles <[3]cengles at cox.net>
   wrote:

   A  A Dear Forum,
   A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  I installed
   poly-urethane bushings about
   A  A 18-20 years ago.A  A Now there seems to be a little bit of play in
   the
   A  A right front suspension without trauma or incident.A  The amateur
   A  A mechanics here suggest that the poly-urethane bushings are the
   main
   A  A suspects.A  A Externally, they look fine.A  A The left side is
   tight.
   A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  So, rubber bushings go
   bad over time
   A  A (decades?).A  A Do poly-urethane bushings go bad over a similar
   time?
   A  A Is this a typical failure mode?
   A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A  A
   Warmest regards,A  Chuck Engles
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [4]DeTomaso at server.detomasolist.com
   [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

   A

References

   1. mailto:cengles at cox.net
   2. mailto:nwpantera at gmail.com
   3. mailto:cengles at cox.net
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list