[DeTomaso] FW: Pantera Question for you guys. - timing marks

[Mike & Elizabeth Thomas]

Not to mention avoiding the need to pull the seat, firewall cover and access
cover to set the timing . . .
Thanks Thomas

-----Original Message-----
From: Thomas Törnblom <thomas at hax.se> 
Sent: Sunday, June 24, 2018 11:11 AM
To: Larry Stock <larrys at panteraparts.com>
Cc: Mike & Elizabeth Thomas <mbefthomas at comcast.net>; doug351c at gmail.com;
jgkrenton at comcast.net; detomaso at server.detomasolist.com; gggraup at comcast.net
Subject: Re: [DeTomaso] FW: Pantera Question for you guys. - timing marks

Late cars have timing marks on the flywheel. Not sure if that can be added
to early cars, but that is much safer than the damper. 

/Thomas

> 24 juni 2018 kl. 19:39 skrev Larry Stock <larrys at panteraparts.com>:
> 
> The damper has probably de-bonded and has rotted out of its balance 
> position.
> Coming through Seattle from Bremerton via ferry today.
> Larry
> 
> On 6/24/18, 9:53 AM, "DeTomaso on behalf of Mike & Elizabeth Thomas"
> <detomaso-bounces at server.detomasolist.com on behalf of 
> mbefthomas at comcast.net> wrote:
> 
>>  One of our PNW members from Spokane has run into some challenges 
>> with  the timing marks on his Cleveland.  Thought I'd pass it to the 
>> forum  for some Sunday discussion.  Thanks in advance, this is what 
>> makes this  group so great!
>> 
>> 
>>  Mike Thomas
>> 
>>  Pres., Panteras Northwest
>> 
>>  206-795-3302
>> 
>>  Yellow '74 #6328
>> 
>>  [1]www.panterasnorthwest.com
>> 
>> 
>> 
>> 
>>  From: gggraup at comcast.net <gggraup at comcast.net>
>>  Sent: Sunday, June 24, 2018 7:34 AM
>>  To: Mike & Elizabeth Thomas <mbefthomas at comcast.net>
>>  Subject: Pantera Question for you guys.
>> 
>> 
>> 
>> 
>>  Hi Mike;   Hope you are well.   Got a question for you .    On my
>>  Pantera, which is a 71,   I find that when I bring  number 1 cylinder
>>  up to top dead center and use the mark  on the damper as a guide, its
>>  not even close to accurate.   Inches off.......   So I scribed a new
>>  mark that I use.    I  have no way of knowing, but I suspect it was mis
>>  marked or maybe a damper off a different car.       The only thing I
>>  can figure out otherwise is that possibly the  metal  pointer is in 
>> the  wrong spot on the engine.,  although it doesn't appear it could go
>>  anywhere else on the front of the engine.     Any ideas on this?
>>  Gary Graupner.
>> 
>> References
>> 
>>  1. http://www.panterasnorthwest.com/ 
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA Posted emails must not 
>> exceed 1.5 Megabytes DeTomaso mailing list 
>> DeTomaso at server.detomasolist.com 
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) 
>> use the links above.
>> 
>> Members who post to this list grant license to the list to forward 
>> any message posted here to all past, current, or future members of the
list.
>> They also grant the list owner permission to maintain an archive or 
>> approve the archiving of list messages.
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA Posted emails must not 
> exceed 1.5 Megabytes DeTomaso mailing list 
> DeTomaso at server.detomasolist.com 
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
> 
> Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
> 
> !DSPAM:5b2fd78a24362971925675!
>