[DeTomaso] Steering shroad Allen head screw size?
Julian Kift
julian_kift at hotmail.com
Sat Jun 9 10:46:28 EDT 2018
That's where I was going by the description, but according to Wilkinson the upper bolt (12) is part #03013A a M8*1.25*20 Allen bolt and lower one (14) is a regular bolt M8*1.25*15.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Joseph F. Byrd, Jr. <byrdjf at embarqmail.com>
Sent: Saturday, June 9, 2018 7:33 AM
To: 'Panteratime'
Cc: 'List DeTomaso Forum'
Subject: Re: [DeTomaso] Steering shroad Allen head screw size?
This is from NOTES....I have not verified
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf Of Panteratime via DeTomaso
Sent: Saturday, June 09, 2018 10:18 AM
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Steering shroad Allen head screw size?
Folks,
The Allen head screw that screws into under dash to hold steering shroud "pipe" is stripped. Part number 00050042. Any one know Pitch and size of the screw or where I can get one? looking to replace screw and re tap hole.
Thanks!!!
-------------- next part --------------
That's where I was going by the description, but according to Wilkinson
the upper bolt (12) is part #03013A a M8*1.25*20 Allen bolt and lower
one (14) is a regular bolt M8*1.25*15.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Joseph F. Byrd, Jr. <byrdjf at embarqmail.com>
Sent: Saturday, June 9, 2018 7:33 AM
To: 'Panteratime'
Cc: 'List DeTomaso Forum'
Subject: Re: [DeTomaso] Steering shroad Allen head screw size?
This is from NOTES....I have not verified
-----Original Message-----
From: DeTomaso [[1]mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of Panteratime via DeTomaso
Sent: Saturday, June 09, 2018 10:18 AM
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Steering shroad Allen head screw size?
Folks,
The Allen head screw that screws into under dash to hold steering
shroud "pipe" is stripped. Part number 00050042. Any one know Pitch
and size of the screw or where I can get one? looking to replace screw
and re tap hole.
Thanks!!!
References
1. mailto:detomaso-bounces at server.detomasolist.com
More information about the DeTomaso
mailing list