[DeTomaso] Spinning wheel stud
sean mundy
seanmundy at hotmail.com
Sun Jul 15 16:37:42 EDT 2018
Yes. I’m using my electric impact gun. 3 lug nuts came off ok. 2 remain spinning. I’ve take my wheels off probably more than most people. Maybe I just wore the wheel studs out with fatigue
Sent from my iPhone
On Jul 15, 2018, at 1:34 PM, Bjoern Flesland <bflesland at gmail.com<mailto:bflesland at gmail.com>> wrote:
Hi Sean,
Did you try loosening your spinning lug nuts with a proper air gun?
Just a thought...
Cheers Bjoern
søn. 15. jul. 2018 kl. 21.41 skrev sean mundy <seanmundy at hotmail.com<mailto:seanmundy at hotmail.com>>:
My weekend project was to remove my rear wheels and check my rear brake
pad wear. Oops, 2 of the pside lug nuts just spin and won't loosen
up. It looks like the studs are spinning and stripped. First I have
to figure out how to get the lug nuts off. Drilling? I replaced the
rear bearings over 10yrs ago so I know what a PITA removing the hub is
going to be.. Assume I will need rear disk replacement so what are my
affordable options? I've spent a lot of time searching the forum for
info but its a bit overwhelming. Sean M
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com<mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Yes. I'm using my electric impact gun. 3 lug nuts came off ok. 2
remain spinning. I've take my wheels off probably more than most
people. Maybe I just wore the wheel studs out with fatigue
Sent from my iPhone
On Jul 15, 2018, at 1:34 PM, Bjoern Flesland <[1]bflesland at gmail.com>
wrote:
Hi Sean,
Did you try loosening your spinning lug nuts with a proper air gun?
Just a thought...
Cheers Bjoern
so/n. 15. jul. 2018 kl. 21.41 skrev sean mundy
<[2]seanmundy at hotmail.com>:
My weekend project was to remove my rear wheels and check my rear
brake
pad wear. Oops, 2 of the pside lug nuts just spin and won't
loosen
up. It looks like the studs are spinning and stripped. First I
have
to figure out how to get the lug nuts off. Drilling? I replaced
the
rear bearings over 10yrs ago so I know what a PITA removing the
hub is
going to be.. Assume I will need rear disk replacement so what
are my
affordable options? I've spent a lot of time searching the forum
for
info but its a bit overwhelming. Sean M
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
[4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:bflesland at gmail.com
2. mailto:seanmundy at hotmail.com
3. mailto:DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list