[DeTomaso] Clutch master cyl
Don Franck
panteradon at gmail.com
Sun Jul 1 16:25:50 EDT 2018
We have hit a hurdle. The washer in the old cylinder is 1/100 of an in
larger that the new one and will not go into the new master cylinder. We
decided to pull the pin and remove the old arm from the car. We got the
snap ring off but the pin is rusted on solid. Soaking it with blaster now.
Any new ideas are appreciated!
Don
On Sunday, July 1, 2018, <Admin at detomasoregistry.org> wrote:
>
> Don,
>
> You may find something useful here:
>
> http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
>
> and
>
> http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
>
> and
>
> http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
>
>
> Found by searching the site map for "clutch"
>
> Chuck
>
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf Of Don Franck
> Sent: Sunday, July 01, 2018 11:13 AM
> To: <detomaso at server.detomasolist.com>; SCPOCA at yahoogroups.com
> Subject: [DeTomaso] Clutch master cyl
>
> Ok here is a pic of the clutch mechanism under the dash. Getting to the
> top bolt seems to be an impossible task. IF we can get it out, I can't see
> how we can get it back in!!!
>
> --
> Don
>
>
--
Don
-------------- next part --------------
We have hit a hurdle.A The washer in the old cylinder is 1/100 of an
in larger that the new one and will not go into the new master
cylinder.A We decided to pull the pin and remove the old arm from the
car.A We got the snap ring off but the pin is rusted on solid.A
Soaking it with blaster now.
Any new ideas are appreciated!
Don
On Sunday, July 1, 2018, <[1]Admin at detomasoregistry.org> wrote:
Don,
You may find something useful here:
[2]http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
and
[3]http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
and
[4]http://www.provamo.com/Members/TechInfo/
ClutchEffortReductionKit.asp
Found by searching the site map for "clutch"
Chuck
-----Original Message-----
From: DeTomaso [mailto:[5]detomaso-bounces at server.detomasolist.com]
On Behalf Of Don Franck
Sent: Sunday, July 01, 2018 11:13 AM
To: <[6]detomaso at server.detomasolist.com>; [7]SCPOCA at yahoogroups.com
Subject: [DeTomaso] Clutch master cyl
Ok here is a pic of the clutch mechanism under the dash.A A Getting
to the
top bolt seems to be an impossible task.A IF we can get it out, I
can't see
how we can get it back in!!!
--
Don
--
Don
References
1. mailto:Admin at detomasoregistry.org
2. http://www.provamo.com/Members/TechInfo/ClutchOverview.asp
3. http://www.provamo.com/Members/DeTEvents/2008ClutchMaster.asp
4. http://www.provamo.com/Members/TechInfo/ClutchEffortReductionKit.asp
5. mailto:detomaso-bounces at server.detomasolist.com
6. mailto:detomaso at server.detomasolist.com
7. mailto:SCPOCA at yahoogroups.com
More information about the DeTomaso
mailing list