[DeTomaso] Re Opening console for modern din 1 (2 by 7) radio???
Ken Green
kenn_green at yahoo.com
Mon Jan 29 16:49:00 EST 2018
That looks just like the sleeve that came with the radio. The flange is very small.
Ken
From: Thomas Törnblom <thomas at hax.se>
To: Julian Kift <julian_kift at hotmail.com>
Cc: "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>; Ken Green <kenn_green at yahoo.com>; Tomas Gunnarsson <guson at home.se>
Sent: Monday, January 29, 2018 1:24 PM
Subject: Re: [DeTomaso] Re Opening console for modern din 1 (2 by 7) radio???
Perhaps modifying one of these?
> 29 jan. 2018 kl. 22:02 skrev Julian Kift <julian_kift at hotmail.com>:
>
> Crutchfield will most likely have an universal bezel or trim ring, but
> if your radio face is already larger it's not designed for one. You can
> usually use the mounting sleeve for a template and it has tabs that
> bend around the back side of the opening prior to sliding in the radio.
> Just go easy with a Dremel tool until the sleeve slides in the hole.
>
> Julian
> __________________________________________________________________
>
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
> Ken Green via DeTomaso <detomaso at server.detomasolist.com>
> Sent: Monday, January 29, 2018 12:29 PM
> To: Tomas Gunnarsson; detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
> radio???
>
> Hi Tomas,
> The flange on the mounting sleeve is only maybe 1/16 inch. The
> hole can't be even a little oversized. The face of the radio is only
> slightly larger. Not real user friendly. I tried to find a bezel made
> for a din 1 radio, but can't find one.
> I could try to make a sheet metal bezel? If I mess it up, I can
> make another one. Sheet metal would provide a more positive indexing
> to the sleeve than the fiberglass. Maybe just a 1/4 inch around the
> opening, paint it black?
> Ken
> From: Tomas Gunnarsson <guson at home.se>
> To: kenn_green at yahoo.com; detomaso at server.detomasolist.com
> Sent: Monday, January 29, 2018 1:57 AM
> Subject: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
> radio???
>
> Ken,
> If you mark the corners of the new opening from the front, then cut
> the
> cover according to those marks and fold it away while you cut from
> the
> front you should be fine.
> Tomas
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> [1]http://server.detomasolist.com/mailman/listinfo/detomaso
> [2]DeTomaso Info Page
> server.detomasolist.com
> This is the DeTomaso mailing list, a free and open forum for the
> discussion of issues surrounding all DeTomaso automobiles. This is an
> unmoderated mailing list ...
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. http://server.detomasolist.com/mailman/listinfo/detomaso
> 2. http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
> !DSPAM:5a6f8c0512849807011174!
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>
> !DSPAM:5a6f8c0512849807011174!_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
That looks just like the sleeve that came with the radio. The flange
is very small.
Ken
__________________________________________________________________
From: Thomas TAP:rnblom <thomas at hax.se>
To: Julian Kift <julian_kift at hotmail.com>
Cc: "detomaso at server.detomasolist.com"
<detomaso at server.detomasolist.com>; Ken Green <kenn_green at yahoo.com>;
Tomas Gunnarsson <guson at home.se>
Sent: Monday, January 29, 2018 1:24 PM
Subject: Re: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
radio???
Perhaps modifying one of these?
> 29 jan. 2018 kl. 22:02 skrev Julian Kift
<[1]julian_kift at hotmail.com>:
>
> Crutchfield will most likely have an universal bezel or trim ring,
but
> if your radio face is already larger it's not designed for one. You
can
> usually use the mounting sleeve for a template and it has tabs that
> bend around the back side of the opening prior to sliding in the
radio.
> Just go easy with a Dremel tool until the sleeve slides in the hole.
>
> Julian
> __________________________________________________________________
>
> From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on
behalf of
> Ken Green via DeTomaso <[3]detomaso at server.detomasolist.com>
> Sent: Monday, January 29, 2018 12:29 PM
> To: Tomas Gunnarsson; [4]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
> radio???
>
> Hi Tomas,
> The flange on the mounting sleeve is only maybe 1/16 inch. The
> hole can't be even a little oversized. The face of the radio is
only
> slightly larger. Not real user friendly. I tried to find a bezel
made
> for a din 1 radio, but can't find one.
> I could try to make a sheet metal bezel? If I mess it up, I can
> make another one. Sheet metal would provide a more positive
indexing
> to the sleeve than the fiberglass. Maybe just a 1/4 inch around the
> opening, paint it black?
> Ken
> From: Tomas Gunnarsson <[5]guson at home.se>
> To: [6]kenn_green at yahoo.com; [7]detomaso at server.detomasolist.com
> Sent: Monday, January 29, 2018 1:57 AM
> Subject: [DeTomaso] Re Opening console for modern din 1 (2 by 7)
> radio???
>
> Ken,
> If you mark the corners of the new opening from the front, then
cut
> the
> cover according to those marks and fold it away while you cut from
> the
> front you should be fine.
> Tomas
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [8]DeTomaso at server.detomasolist.com
> [1][9]http://server.detomasolist.com/mailman/listinfo/detomaso
> [2]DeTomaso Info Page
> server.detomasolist.com
> This is the DeTomaso mailing list, a free and open forum for the
> discussion of issues surrounding all DeTomaso automobiles. This is
an
> unmoderated mailing list ...
> To manage your subscription (change email address, unsubscribe,
etc.)
> use the links above.
> Members who post to this list grant license to the list to forward
any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an
archive
> or approve the archiving of list messages.
>
> References
>
> 1. [10]http://server.detomasolist.com/mailman/listinfo/detomaso
> 2. [11]http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
> !DSPAM:5a6f8c0512849807011174!
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [12]DeTomaso at server.detomasolist.com
> [13]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
>
> !DSPAM:5a6f8c0512849807011174!
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[14]DeTomaso at server.detomasolist.com
[15]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:julian_kift at hotmail.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:detomaso at server.detomasolist.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:guson at home.se
6. mailto:kenn_green at yahoo.com
7. mailto:detomaso at server.detomasolist.com
8. mailto:DeTomaso at server.detomasolist.com
9. http://server.detomasolist.com/mailman/listinfo/detomaso
10. http://server.detomasolist.com/mailman/listinfo/detomaso
11. http://server.detomasolist.com/mailman/listinfo/detomaso
12. mailto:DeTomaso at server.detomasolist.com
13. http://server.detomasolist.com/mailman/listinfo/detomaso
14. mailto:DeTomaso at server.detomasolist.com
15. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list