[DeTomaso] Are all the suspension arm bushings the same size?

[Larry Stock]

The suspension Bushings are the same front and rear unless you get the
added Caster polyurethane set with the offset bushing kit. If you choose
the Offset front bushing kit, you should about 1 to 1-1/2 degrees of added
caster that the Pantera badly needs.
Larry Stock



On 1/16/18, 7:39 PM, "DeTomaso on behalf of Pantdino via DeTomaso"
<detomaso-bounces at server.detomasolist.com on behalf of
detomaso at server.detomasolist.com> wrote:

>   I replaced my rear A-arm bushings a while ago, and now the fronts need
>   to be done.
>
>   I have graphite-impregnated urethane bushings from when I ordered a set
>   back then, but are the front bushings different from the rear ones?
>   Pantera East doesn't seem to have a website anymore.
>
>   PPC's parts seems to imply they are, but does anyone know for sure?
>
>   (I have the ones that are sized to go inside the outer sleeve of the
>   old bushing, in case you were wondering.)
>
>   Thanks,
>
>   Jim
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.