[DeTomaso] Fwd: Are all the suspension arm bushings the same size?
Pantdino
pantdino at aol.com
Tue Jan 16 23:17:27 EST 2018
The thinking at the time was that the thin sheet metal which makes up the A arm is easily bent if too much force is applied trying to get the old bushing out. (Or I imagine if the outer sleeve is seized to the A arm, the round opening in the A arm could be distorted / destroyed even if a press were used exactly correctly.)
Yes, it was a pain getting the rubber out of the outer sleeve. But after 40 years the rubber isn't bonded all that well to the metal anymore. :)
-----Original Message-----
From: Julian Kift <julian_kift at hotmail.com>
To: Pantdino <pantdino at aol.com>; detomaso <detomaso at server.detomasolist.com>
Sent: Tue, Jan 16, 2018 7:50 pm
Subject: Re: [DeTomaso] Fwd: Are all the suspension arm bushings the same size?
Yes, they are all the same, however I am perplexed by the statement that your replacement bushings are designed to fit in the sleeves of the originals, as the rubber in those is bonded to the inner and outer, so you would have to torch the rubber out? That seems a hokey half-ass solution to a problem that doesn't exist!
Julian
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Pantdino via DeTomaso <detomaso at server.detomasolist.com>
Sent: Tuesday, January 16, 2018 7:44 PM
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Fwd: Are all the suspension arm bushings the same size?
Wilkinson's website shows the same part number for all the bushings, upper and lower, front and rear, so I guess that confirms it
Thanks
Jim
-----Original Message-----
From: Pantdino <pantdino at aol.com>
To: DeTomaso <DeTomaso at server.detomasolist.com>
Sent: Tue, Jan 16, 2018 7:39 pm
Subject: Are all the suspension arm bushings the same size?
I replaced my rear A-arm bushings a while ago, and now the fronts need to be done.
I have graphite-impregnated urethane bushings from when I ordered a set back then, but are the front bushings different from the rear ones? Pantera East doesn't seem to have a website anymore.
PPC's parts seems to imply they are, but does anyone know for sure?
(I have the ones that are sized to go inside the outer sleeve of the old bushing, in case you were wondering.)
Thanks,
Jim
-------------- next part --------------
The thinking at the time was that the thin sheet metal which makes up
the A arm is easily bent if too much force is applied trying to get the
old bushing out. (Or I imagine if the outer sleeve is seized to the A
arm, the round opening in the A arm could be distorted / destroyed even
if a press were used exactly correctly.)
Yes, it was a pain getting the rubber out of the outer sleeve. But
after 40 years the rubber isn't bonded all that well to the metal
anymore. :)
-----Original Message-----
From: Julian Kift <julian_kift at hotmail.com>
To: Pantdino <pantdino at aol.com>; detomaso
<detomaso at server.detomasolist.com>
Sent: Tue, Jan 16, 2018 7:50 pm
Subject: Re: [DeTomaso] Fwd: Are all the suspension arm bushings the
same size?
Yes, they are all the same, however I am perplexed by the statement
that your replacement bushings are designed to fit in the sleeves of
the originals, as the rubber in those is bonded to the inner and outer,
so you would have to torch the rubber out? That seems a hokey half-ass
solution to a problem that doesn't exist!
Julian
__________________________________________________________________
From: DeTomaso <detomaso-[1]bounces at server.detomasolist.com> on behalf
of Pantdino via DeTomaso <[2]detomaso at server.detomasolist.com>
Sent: Tuesday, January 16, 2018 7:44 PM
To: [3]detomaso at server.detomasolist.com
Subject: [DeTomaso] Fwd: Are all the suspension arm bushings the same
size?
Wilkinson's website shows the same part number for all the bushings,
upper and lower, front and rear, so I guess that confirms it
Thanks
Jim
-----Original Message-----
From: Pantdino <[4]pantdino at aol.com>
To: DeTomaso <[5]DeTomaso at server.detomasolist.com>
Sent: Tue, Jan 16, 2018 7:39 pm
Subject: Are all the suspension arm bushings the same size?
I replaced my rear A-arm bushings a while ago, and now the fronts need
to be done.
I have graphite-impregnated urethane bushings from when I ordered a set
back then, but are the front bushings different from the rear ones?
Pantera East doesn't seem to have a website anymore.
PPC's parts seems to imply they are, but does anyone know for sure?
(I have the ones that are sized to go inside the outer sleeve of the
old bushing, in case you were wondering.)
Thanks,
Jim
References
1. mailto:bounces at server.detomasolist.com
2. mailto:detomaso at server.detomasolist.com
3. mailto:detomaso at server.detomasolist.com
4. mailto:pantdino at aol.com
5. mailto:DeTomaso at server.detomasolist.com
More information about the DeTomaso
mailing list