[DeTomaso] Source for basic torque values
Dave Londry
davel at emspace.com
Fri Jan 5 20:21:30 EST 2018
Trying to attach a torque spreadsheet to the list.
Stolen from all over.
Dave
On 05/01/2018 8:49 AM, Ken Green via DeTomaso wrote:
> I think I copied this out of the HP Books 351C:
> 351C, 351M
> Fastener Type Torque Spec
> Main cap bolts 95-105 ft.-lbs.
> Connecting rod bolts 40-45 ft.-lbs. (45-50 ft.-lbs. for Boss 351C)
> Cylinder head bolts(follow factory torque sequence) 105 ft.-lbs. (125
> ft.-lbs. for Boss 351C)
> Rocker arms (non-adjustable) 18-22 ft.-lbs.
> 5/16 in. intake manifold bolts 21-25 ft.-lbs.
> 3/8 in. intake manifold bolts 28-33 ft.-lbs.
> Oil pump bolt 25 ft.-lbs.
> Cam bolts 40-45 ft.-lbs.
> Cam thrust plate bolts 9-12 ft.-lbs.
> Harmonic damper bolt 70-90 ft.-lbs.
> Flywheel/flexplate bolts 75-85 ft.-lbs.
> Pressure plate bolts 35 ft.-lbs.
> Front cover bolts 12-18 ft.-lbs.
>
>
>
> Bolts or Parts
> Lube or Sealer
> Torque to:
> Main Caps
> Engine Oil
> 105 ft-lbs.
>
> Warning!!!
>
> If you are using ARP bolts, you MUST use
> their specs. [1]Click Here!
>
> Connecting Rod Bolts 351C
> *Boss 351C
> Engine Oil
> 45 ft-lbs.
> *50 ft-lbs.
> Cylinder Heads 351C
> *Boss 351C
> Engine oil
> (blind hole)
> Sealer
> (water jacket)
> 105 ft-lbs.
> *125 ft-lbs.
> Rocker Arms
> Engine Oil
> 20 ft-lbs.
> Oil Pump
> Engine Oil
> 25 ft-lbs.
> Oil Pan
> Engine Oil
> 12 ft-lbs.
> Camshaft Thrust Plate
> Thread Locker
> 12 ft-lbs.
> Cam Bolt (upper gear)
> Thread Locker
> 40 ft-lbs.
> Front Cover
> Engine Oil
> 20 ft-lbs.
> Intake Manifold 5/16 Bolts
> (Cast Iron Heads) *3/8 Bolts
> Non- Hardening Sealer
> 25 ft-lbs.
> *30 ft-lbs.
> Valve Cover
> Engine Oil
> 10 ft-lbs.
> Flexplate (Automatic)
> Flywheel (Clutch)
> Thread Locker
> 85 ft-lbs.
> Clutch Pressure Plate
> Thread Locker
> 35 ft-lbs.
> Centerbolt
> (Harmonic Damper)
> Thread Locker
> 90 ft-lbs.
> Bellhousing
> (Transmission to Block)
> Engine Oil
> 25 ft-lbs.
>
>
>
> 351C, 351M Fastener Type Torque Spec
> -----------------------------------------------------------------------
> ---------
> Main cap bolts 95-105 ft.-lbs.
> Connecting rod bolts 40-45 ft.-lbs. (45-50 ft.-lbs. for Boss 351C)
> Cylinder head bolts
> (follow factory torque sequence) 105 ft.-lbs. (125 ft.-lbs. for Boss
> 351C)
> Rocker arms (non-adjustable) 18-22 ft.-lbs.
> 5/16 in. intake manifold bolts 21-25 ft.-lbs.
> 3/8 in. intake manifold bolts 28-33 ft.-lbs.
> Oil pump bolt 25 ft.-lbs.
> Cam bolts 40-45 ft.-lbs.
> Cam thrust plate bolts 9-12 ft.-lbs.
> Harmonic damper bolt 70-90 ft.-lbs.
> Flywheel/flexplate bolts 75-85 ft.-lbs.
> Pressure plate bolts 35 ft.-lbs.
> Front cover bolts 12-18 ft.-lbs.
> Oil Pan bolts small a 8 ft-lbs, large a 10 ft-pounds
> __________________________________________________________________
>
> From: Charles McCall <charlesmccall at gmail.com>
> To: Detomaso Email List <detomaso at detomasolist.com>
> Sent: Friday, January 5, 2018 12:11 AM
> Subject: [DeTomaso] Source for basic torque values
> Hi all
> Santa was kind enough to bring me a torque wrench, something I didn't
> have before. Until now I've just tightened basic things by feel - the
> wheels should be pretty darn tight, the carb shouldn't be
> overtightened
> or you'll strip the threads in the intake, so just medium-tight
> there,
> etc.A
> Where is a good reference for basic things on a Pantera? Specifically
> I
> need to reinstall the carb, air cleaner, and wheels before taking the
> car back out.A
> Thank you!
> _______________________________________________
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [2]DeTomaso at server.detomasolist.com
> [3]http://server.detomasolist.com/mailman/listinfo/detomaso
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
> References
>
> 1. http://www.arp-bolts.com/Tech/TechTorque.html
> 2. mailto:DeTomaso at server.detomasolist.com
> 3. http://server.detomasolist.com/mailman/listinfo/detomaso
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Trying to attach a torque spreadsheet to the list.
Stolen from all over.
Dave
On 05/01/2018 8:49 AM, Ken Green via DeTomaso wrote:
I think I copied this out of the HP Books 351C:
351C, 351M
Fastener Type Torque Spec
Main cap bolts 95-105 ft.-lbs.
Connecting rod bolts 40-45 ft.-lbs. (45-50 ft.-lbs. for Boss 351C)
Cylinder head bolts(follow factory torque sequence) 105 ft.-lbs. (125
ft.-lbs. for Boss 351C)
Rocker arms (non-adjustable) 18-22 ft.-lbs.
5/16 in. intake manifold bolts 21-25 ft.-lbs.
3/8 in. intake manifold bolts 28-33 ft.-lbs.
Oil pump bolt 25 ft.-lbs.
Cam bolts 40-45 ft.-lbs.
Cam thrust plate bolts 9-12 ft.-lbs.
Harmonic damper bolt 70-90 ft.-lbs.
Flywheel/flexplate bolts 75-85 ft.-lbs.
Pressure plate bolts 35 ft.-lbs.
Front cover bolts 12-18 ft.-lbs.
Bolts or Parts
Lube or Sealer
Torque to:
Main Caps
Engine Oil
105 ft-lbs.
Warning!!!
If you are using ARP bolts, you MUST use
their specs. [1]Click Here!
Connecting Rod Bolts 351C
*Boss 351C
Engine Oil
45 ft-lbs.
*50 ft-lbs.
Cylinder Heads 351C
*Boss 351C
Engine oil
(blind hole)
Sealer
(water jacket)
105 ft-lbs.
*125 ft-lbs.
Rocker Arms
Engine Oil
20 ft-lbs.
Oil Pump
Engine Oil
25 ft-lbs.
Oil Pan
Engine Oil
12 ft-lbs.
Camshaft Thrust Plate
Thread Locker
12 ft-lbs.
Cam Bolt (upper gear)
Thread Locker
40 ft-lbs.
Front Cover
Engine Oil
20 ft-lbs.
Intake Manifold 5/16 Bolts
(Cast Iron Heads) *3/8 Bolts
Non- Hardening Sealer
25 ft-lbs.
*30 ft-lbs.
Valve Cover
Engine Oil
10 ft-lbs.
Flexplate (Automatic)
Flywheel (Clutch)
Thread Locker
85 ft-lbs.
Clutch Pressure Plate
Thread Locker
35 ft-lbs.
Centerbolt
(Harmonic Damper)
Thread Locker
90 ft-lbs.
Bellhousing
(Transmission to Block)
Engine Oil
25 ft-lbs.
351C, 351M Fastener Type Torque Spec
-----------------------------------------------------------------------
---------
Main cap bolts 95-105 ft.-lbs.
Connecting rod bolts 40-45 ft.-lbs. (45-50 ft.-lbs. for Boss 351C)
Cylinder head bolts
(follow factory torque sequence) 105 ft.-lbs. (125 ft.-lbs. for Boss
351C)
Rocker arms (non-adjustable) 18-22 ft.-lbs.
5/16 in. intake manifold bolts 21-25 ft.-lbs.
3/8 in. intake manifold bolts 28-33 ft.-lbs.
Oil pump bolt 25 ft.-lbs.
Cam bolts 40-45 ft.-lbs.
Cam thrust plate bolts 9-12 ft.-lbs.
Harmonic damper bolt 70-90 ft.-lbs.
Flywheel/flexplate bolts 75-85 ft.-lbs.
Pressure plate bolts 35 ft.-lbs.
Front cover bolts 12-18 ft.-lbs.
Oil Pan bolts small a 8 ft-lbs, large a 10 ft-pounds
__________________________________________________________________
From: Charles McCall [1]<charlesmccall at gmail.com>
To: Detomaso Email List [2]<detomaso at detomasolist.com>
Sent: Friday, January 5, 2018 12:11 AM
Subject: [DeTomaso] Source for basic torque values
Hi all
Santa was kind enough to bring me a torque wrench, something I didn't
have before. Until now I've just tightened basic things by feel - the
wheels should be pretty darn tight, the carb shouldn't be
overtightened
or you'll strip the threads in the intake, so just medium-tight
there,
etc.A
Where is a good reference for basic things on a Pantera? Specifically
I
need to reinstall the carb, air cleaner, and wheels before taking the
car back out.A
Thank you!
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[3]2]DeTomaso at server.detomasolist.com
[3][4]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. [5]http://www.arp-bolts.com/Tech/TechTorque.html
2. [6]mailto:DeTomaso at server.detomasolist.com
3. [7]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[8]DeTomaso at server.detomasolist.com
[9]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.
Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.
References
1. mailto:charlesmccall at gmail.com
2. mailto:detomaso at detomasolist.com
3. mailto:2]DeTomaso at server.detomasolist.com
4. http://server.detomasolist.com/mailman/listinfo/detomaso
5. http://www.arp-bolts.com/Tech/TechTorque.html
6. mailto:DeTomaso at server.detomasolist.com
7. http://server.detomasolist.com/mailman/listinfo/detomaso
8. mailto:DeTomaso at server.detomasolist.com
9. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TorqueNumbers.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 14622 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20180105/31a3ebce/attachment.xlsx>
More information about the DeTomaso
mailing list