[DeTomaso] Pantera front trunk lid
Jeff Detrich
jjdetrich at gmail.com
Wed Jan 3 11:50:37 EST 2018
Just be careful not to leave hand prints where you press down on the hood.
😇
Since it is a slight arch, you can bend it back to where it should be
by strategically placing some blankets
to support the hood while you apply downward pressure where you want to
lower it . Work slowly and in small increments and check your progress
often to avoid bending it too much .
On Tue, Jan 2, 2018 at 5:39 PM, James coyne <tecnosound at hotmail.com> wrote:
> __________________________________________________________________
>
> Since it is a slight arch, you can bend it back to where it should be
> by strategically placing some blankets
>
> to support the hood while you apply downward pressure where you want to
> lower it . Work slowly and in small increments and check your progress
> often to avoid bending it too much .
> __________________________________________________________________
>
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
> Greg Milnar <gbmilnar at gmail.com>
> Sent: Tuesday, January 2, 2018 3:17 PM
> To: DeTomaso at server.detomasolist.com
> Subject: [DeTomaso] Pantera front trunk lid
>
> My Pantera has a slight excessive front to rear arch in the middle
> section
> of the front trunk lid.
> Has anyone developed a technique to flatten this for a perfect fit?
> Greg Milnar
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
-------------- next part --------------
Just be careful not to leave hand prints where you press down on the
hood. A d-
Since it is a slight arch, you can bend it back to where it should be
A A by strategically placing some blankets
A A to support the hood while you apply downward pressure where you
want to
A A lower it . Work slowly and in small increments and check your
progress
A A often to avoid bending it too much .
On Tue, Jan 2, 2018 at 5:39 PM, James coyne <[1]tecnosound at hotmail.com>
wrote:
A A A ____________________________________________________________
______
A A Since it is a slight arch, you can bend it back to where it
should be
A A by strategically placing some blankets
A A to support the hood while you apply downward pressure where you
want to
A A lower it . Work slowly and in small increments and check your
progress
A A often to avoid bending it too much .
A A A ____________________________________________________________
______
A A From: DeTomaso <[2]detomaso-bounces at server.detomasolist.com> on
behalf of
A A Greg Milnar <[3]gbmilnar at gmail.com>
A A Sent: Tuesday, January 2, 2018 3:17 PM
A A To: [4]DeTomaso at server.detomasolist.com
A A Subject: [DeTomaso] Pantera front trunk lid
A A My Pantera has a slight excessive front to rear arch in the middle
A A section
A A of the front trunk lid.
A A Has anyone developed a technique to flatten this for a perfect
fit?
A A Greg Milnar
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[5]DeTomaso at server.detomasolist.com
[6]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe,
etc.) use the links above.
Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of
the list. They also grant the list owner permission to maintain an
archive or approve the archiving of list messages.
References
1. mailto:tecnosound at hotmail.com
2. mailto:detomaso-bounces at server.detomasolist.com
3. mailto:gbmilnar at gmail.com
4. mailto:DeTomaso at server.detomasolist.com
5. mailto:DeTomaso at server.detomasolist.com
6. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list