[DeTomaso] Fwd: Re: 351C Water Temperature Sensor

[Pantdino]

On second thought I think I have that backwards. It is better to have it in the engine and the sensor is easily seen on the passenger side of the block toward the front after the firewall is removed. The wire is simply moved from one sensor to the other

Sent from AOL Mobile Mail

On Monday, February 19, 2018, Pantdino <pantdino at aol.com> wrote:

IIRC it is best to have the temp sensor in the surge tank rather than the engine itself. It is easily  seen and reached after the farewall between the passenger compartment and engine bay.

Jim

Sent from AOL Mobile Mail

On Monday, February 19, 2018, Sean Keane <jskeane6 at gmail.com> wrote:

Where is the water temperature sensor typically placed on the 351C, and 
is it difficult to get to when the engine is in the Pantera? I recently 
had my engine rebuilt, and the shop that put everything back together 
after the engine rebuilder had done his job didn't hook up the water 
temperature gauge. Obviously, I'd like to remedy that. It's the gauge 
that goes from 100 to 280 degrees F, and when the car is running, it 
reads less than 100. Any advice is welcome.

Best Regards,

Sean
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   On second thought I think I have that backwards. It is better to have
   it in the engine and the sensor is easily seen on the passenger side of
   the block toward the front after the firewall is removed. The wire is
   simply moved from one sensor to the other

   Sent from AOL Mobile Mail

   On Monday, February 19, 2018, Pantdino <[1]pantdino at aol.com> wrote:

   IIRC it is best to have the temp sensor in the surge tank rather than
   the engine itself. It is easily  seen and reached after the farewall
   between the passenger compartment and engine bay.
   Jim
   Sent from AOL Mobile Mail
   On Monday, February 19, 2018, Sean Keane <[2]jskeane6 at gmail.com> wrote:

     Where is the water temperature sensor typically placed on the 351C,
     and
     is it difficult to get to when the engine is in the Pantera? I
     recently
     had my engine rebuilt, and the shop that put everything back
     together
     after the engine rebuilder had done his job didn't hook up the water
     temperature gauge. Obviously, I'd like to remedy that. It's the
     gauge
     that goes from 100 to 280 degrees F, and when the car is running, it
     reads less than 100. Any advice is welcome.
     Best Regards,
     Sean
     _______________________________________________
     Detomaso Email List is not managed by POCA
     Posted emails must not exceed 1.5 Megabytes
     DeTomaso mailing list
     [3]DeTomaso at server.detomasolist.com
     [4]http://server.detomasolist.com/mailman/listinfo/detomaso
     To manage your subscription (change email address, unsubscribe,
     etc.) use the links above.
     Members who post to this list grant license to the list to forward
     any message posted here to all past, current, or future members of
     the list. They also grant the list owner permission to maintain an
     archive or approve the archiving of list messages.

References

   1. mailto:pantdino at aol.com
   2. mailto:jskeane6 at gmail.com
   3. mailto:DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso