[DeTomaso] intake manifold

Rich Hoppe richbhoppe at gmail.com
Mon Dec 24 10:13:58 EST 2018


Thanks for all the info.
I ended up doing a 4v iron head motor.
I plan to install the Holley throttle body fuel injection system.
It is a 351 Cleveland with a hydraulic flat lifters.
Should do about 375 hp

Curious nobody said weiand intake.
For a long time they were highly regarded
Rich

On Sun, Dec 23, 2018 at 10:41 PM Ken Green <kenn_green at yahoo.com> wrote:

> Do you mean the Holley EFI with injectors in the throttle body, or a
> manifold with 8 injector pockets added?  I recall someone saying that a
> single plain manifold is better with EFI, but that may only be with the
> injectors in the manifold.
>
> I have a Weiand manifold with injectors added and it all fits under the
> screen.  The 4V throttle body isn't as tall and a Holly carb, but maybe
> lose some power without a spacer under the throttle body.
>
> Ken[image: Inline image]
>
>
>
> ------------------------------
> *From:* Rich Hoppe <richbhoppe at gmail.com>
> *To:* detomaso at detomasolist.com
> *Sent:* Sunday, December 23, 2018 3:09 PM
> *Subject:* [DeTomaso] intake manifold
>
>   I am building an engine for my daughters car.
>   I have an edlebrock high rise intake for a 4v that is not made any
>   more, but I think it is too tall.
>   So what is the best manifold for a 4v iron head holley fuel injection
>   motor?
>   thanks Rich
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
>
>
-------------- next part --------------
   Thanks for all the info.
   I ended up doing a 4v iron head motor.
   I plan to install the Holley throttle body fuel injection system.
   It is a 351 Cleveland with a hydraulic flat lifters.
   Should do about 375 hp
   Curious nobody said weiand intake.
   For a long time they were highly regarded
   Rich

   On Sun, Dec 23, 2018 at 10:41 PM Ken Green <[1]kenn_green at yahoo.com>
   wrote:

   Do you mean the Holley EFI with injectors in the throttle body, or a
   manifold with 8 injector pockets added?A  I recall someone saying that
   a single plain manifold is better with EFI, but that may only be with
   the injectors in the manifold.
   I have a Weiand manifold with injectors added and it all fits under the
   screen.A  The 4V throttle body isn't as tall and a Holly carb, but
   maybe lose some power without a spacer under the throttle body.
   Ken Inline image
     __________________________________________________________________

   From: Rich Hoppe <[2]richbhoppe at gmail.com>
   To: [3]detomaso at detomasolist.com
   Sent: Sunday, December 23, 2018 3:09 PM
   Subject: [DeTomaso] intake manifold
   A  I am building an engine for my daughters car.
   A  I have an edlebrock high rise intake for a 4v that is not made any
   A  more, but I think it is too tall.
   A  So what is the best manifold for a 4v iron head holley fuel
   injection
   A  motor?
   A  thanks Rich
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [4]DeTomaso at server.detomasolist.com
   [5]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:kenn_green at yahoo.com
   2. mailto:richbhoppe at gmail.com
   3. mailto:detomaso at detomasolist.com
   4. mailto:DeTomaso at server.detomasolist.com
   5. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: engine.jpg
Type: image/jpeg
Size: 536353 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20181224/9988fdd6/attachment.jpg>


More information about the DeTomaso mailing list