[DeTomaso] Speedo cable

[Mike Drew]

Robert,

I have NOS Ford speedo cable cables (JUST the wire, not the entire assembly) still in the original Ford packaging, for sale if you want to go that route.

Mike

Sent from my iPad

> On Aug 24, 2018, at 05:26, Robert Stroj <npdrs at maui.net> wrote:
> 
> Just had my speedo cable break, about in the middle of the square end that
> enters into the gauge; I suppose the other part of the square wire is still
> in the gauge.
> I was wondering about possibilities of repairing this without the need of
> taking replacing the whole cable and routing a new one.
> 
> 1) seen a comment that this little part could possibly be welded back onto
> the cable; seems it would be a tedious task?
> 
> 2) Did someone use any of the generic core replacement, such as this
> https://www.summitracing.com/int/parts/atp-yc101/applications
> In theory it would be easiest to do by just sliding old core out and new in,
> cutting to length and crimping new end, but not sure if actual dimensions
> would work with our gauge or ZF drive....
> 
> Thanks for suggestions; hope there is a simple way to fix this!
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.