[DeTomaso] 351C New Parts

Mike Drew MikeLDrew at aol.com
Fri Aug 10 09:40:23 EDT 2018


Dave,

I think your budget is much too high considering your extremely modest ambitions. Either lower your budget to match your ambitions, or raise your ambitions to match your budget. 

I would be extremely reticent about using a local shop, unless they have EXTENSIVE experience with the 351C.  I live in the San Francisco Bay Area (well, just outside of it actually) and while there are some excellent engine shops here, none had what I felt was adequate knowledge of the peculiarities of the 351C.  This is why both my engine (408 inch roller cam aluminum head street monster) and Lori’s engine (which you hopefully just read about) were packed up and shipped to Dave McClain in Missouri. 

The resultant engines were both far better than what we likely could have achieved locally, and even factoring in the shipping expenses (about $800 each way) they were also considerably cheaper than what we would have paid locally. 

Lori’s engine is relatively standard yet is substantially better than stock, and the engine build (including intake manifold porting and dyno tuning) was under $3000 (plus shipping). Meanwhile, a guy near me who didn’t know any better had a local shop rebuild his engine, and they made all sorts of design mistakes along the way (such as retaining the pathetic open-chambered iron heads) and he paid more than $7000!  I can guarantee that Lori’s car will easily walk away from his, while still retaining all the virtues of a stock engine (smooth idle, good brake vacuum, good economy, and a very broad powerband), and for less than half the cost to boot.

Mike



Sent from my iPad

> On Aug 9, 2018, at 15:37, "djenkins at vanguardtrailer.com" <djenkins at vanguardtrailer.com> wrote:
> 
>   Charles
>   Rebuild the engine. I want to maintain as much stock as possible.
>   Casual use. A local shop will do the work Budget $6,000?
>   Thanks
>   Dave
>   Sent from my Verizon LG Smartphone
> 
>   ------ Original message------
>   From: Charles Engles
>   Date: Thu, Aug 9, 2018 4:00 PM
>   To: 'David Jenkins';'Detomaso';
>   Cc:
>   Subject:RE: [DeTomaso] 351C New Parts
> Dear Dave,
> 
> 
>                 Could you provide more details?
> 
>                  Rebuilding a 351C, heads, short block, etc?
> 
>                  If you're rebuilding the engine, then stock stroke or
> stroker?   What is the expected purpose of the engine: track, street, casual
> use, stock re-build?  EFI or carb?
> 
>                  Budget?    You're doing the engine assembly?
> 
> 
>                                     Warmest regards,  Chuck Engles
> 
> 
> 
> -----Original Message-----
> From: DeTomaso [mailto[1]:detomaso-bounces at server.detomasolist.com] On Behalf
> Of David Jenkins
> Sent: Thursday, August 09, 2018 3:46 PM
> To: 'Detomaso'
> Subject: [DeTomaso] 351C New Parts
> 
> 
> 
> 
> 
> Someone please remind me where to find the list of recommended new parts for
> a rebuild.
> 
> 
> 
> 
> 
> Thanks Dave
> 
> References
> 
>   1. mailto::detomaso-bounces at server.detomasolist.com
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.



More information about the DeTomaso mailing list