[DeTomaso] Centerforce flywheel hole alignment
Rich Hoppe
richbhoppe at gmail.com
Mon Apr 16 19:04:03 EDT 2018
The map has the correct dimensions in inches and decimal inches.
The labels should have been left out or " used for inches not a single '.
Centerforce gave me the diameter of holes 12.375 inches and 3.410 inches
between bolts.
The rest I had a cadd tech calc.
I have a Bridgeport mill with a digital readout in my garage and I am going
to try to drill the holes.
Maybe I am wrong but it should not be that hard to do.
Place the flywheel on the table.
Center the mill on the flywheel.
Move head to dimensions shown.
Drill, tap and add recess for bolt shoulder.
Guys I am not a machinist, tell me what I am missing.
Rich
On Mon, Apr 16, 2018 at 3:45 PM, Mike Drew <MikeLDrew at aol.com> wrote:
> Rich,
>
> Your making a fantastic argument for either NEVER using a Centerforce
> clutch, or ALWAYS using a Centerforce flywheel with a Centerforce clutch!
>
> I know some people who had flywheels drilled for Centerforce clutches by a
> machinist. The holes weren’t perfect, the clutches weren’t centered and the
> motors shook like a wet dog, wiping out the bearings in no time.
>
> Mike
>
> Sent from my iPad
>
> On Apr 16, 2018, at 15:41, Rich Hoppe <richbhoppe at gmail.com> wrote:
>
> I didn't think this would be a problem.
> I will have my cadd tech look at it again and let you know.
>
> On Mon, Apr 16, 2018 at 3:36 PM, Mike Drew <MikeLDrew at aol.com> wrote:
>
>> Rich,
>>
>> Document came through this time (at least to me as you sent it to my
>> address as well as to the forum)
>>
>> I’m not a machinist so I can’t make out the Units of measure. Looks like
>> perhaps inches and minutes? I would expect thousandths of an inch, but
>> that doesn’t appear to be what they are?
>>
>> Mike
>>
>> Sent from my iPad
>>
>> > On Apr 16, 2018, at 15:06, Rich Hoppe <richbhoppe at gmail.com> wrote:
>> >
>> > Ok I am trying again.
>> >
>> > On Mon, Apr 16, 2018 at 2:57 PM, Mike Drew <[1]MikeLDrew at aol.com>
>> > wrote:
>> >
>> > Seriously?
>> > You sent me a huge (30 mb!!!) blueprint of a neighborhood???
>> > Uh...no. :)
>> > Mike
>> > Sent from my iPad
>> > On Apr 16, 2018, at 14:50, Rich Hoppe <[2]richbhoppe at gmail.com>
>> wrote:
>> >
>> > ok see if this works
>> > On Mon, Apr 16, 2018 at 2:42 PM, Mike Drew <[3]MikeLDrew at aol.com>
>> > wrote:
>> >
>> > Rich,
>> > You didnat include the attachment, just a link to Google docs where
>> > we are afforded the opportunity to create an account.
>> > Can you just attach the actual PDF file?A (The forum software might
>> > not support PDF and you might have to convert to PDF....?
>> > Mike
>> > Sent from my iPad
>> >> On Apr 16, 2018, at 14:17, Rich Hoppe <[4]richbhoppe at gmail.com>
>> > wrote:
>> >>
>> >> A A Just thought someone might what to add this to a data bank.
>> >> A A This is the flywheel hole alignment for centerforce.
>> >> A A Rich[1]Preview attachment flywheel.pdf
>> >> A A [?ui=2&ik=d550393810&view=snatt&th=162d0495ae08
>> > 1a41&att
>> >> A A id=0.1&disp=thd&zw&stw=800]
>> >> A A [cleardot.gif]
>> >> A A PDF
>> >> A A flywheel.pdf
>> >> A A 108 KB
>> >>
>> >> References
>> >>
>> >> A A 1. [5]https://mail.google.com/mail/u
>> > /0/?ui=2&ik=d550393810&view=att&th=162d0495ae081a41&attid=0.
>> > 1&disp=safe&zw
>> >> _______________________________________________
>> >>
>> >>
>> >> Detomaso Email List is not managed by POCA
>> >> Posted emails must not exceed 1.5 Megabytes
>> >> DeTomaso mailing list
>> >> [6]DeTomaso at server.detomasolist.com
>> >> [7]http://server.detomasolist.com/mailman/listinfo/detomaso
>> >>
>> >> To manage your subscription (change email address, unsubscribe,
>> > etc.) use the links above.
>> >>
>> >> Members who post to this list grant license to the list to forward
>> > any message posted here to all past, current, or future members of
>> > the list. They also grant the list owner permission to maintain an
>> > archive or approve the archiving of list messages.
>> >
>> > <01 OCEscan694.pdf>
>> >
>> > References
>> >
>> > 1. mailto:MikeLDrew at aol.com
>> > 2. mailto:richbhoppe at gmail.com
>> > 3. mailto:MikeLDrew at aol.com
>> > 4. mailto:richbhoppe at gmail.com
>> > 5. https://mail.google.com/mail/u/0/?ui=2&ik=d550393810&view=at
>> t&th=162d0495ae081a41&attid=0.1&disp=safe&zw
>> > 6. mailto:DeTomaso at server.detomasolist.com
>> > 7. http://server.detomasolist.com/mailman/listinfo/detomaso
>> > <DOC041618-041618-004.pdf>
>> > _______________________________________________
>> >
>> >
>> > Detomaso Email List is not managed by POCA
>> > Posted emails must not exceed 1.5 Megabytes
>> > DeTomaso mailing list
>> > DeTomaso at server.detomasolist.com
>> > http://server.detomasolist.com/mailman/listinfo/detomaso
>> >
>> > To manage your subscription (change email address, unsubscribe, etc.)
>> use the links above.
>> >
>> > Members who post to this list grant license to the list to forward any
>> message posted here to all past, current, or future members of the list.
>> They also grant the list owner permission to maintain an archive or approve
>> the archiving of list messages.
>>
>>
>
-------------- next part --------------
The map has the correct dimensions in inches andA decimal inches.
The labels should have been left outA or " used for inches not a
single '.
Centerforce gave me the diameter of holes 12.375 inches and 3.410
inches between bolts.
The rest I hadA a cadd tech calc.
I have a Bridgeport mill with a digitalA readout in myA garage and I am
going to try to drill the holes.A
Maybe I am wrong but it should not be that hard to do.
Place the flywheel on the table.
Center the mill on the flywheel.
Move head to dimensions shown.
Drill, tap and add recess for bolt shoulder.
Guys I am not a machinist, tell me what I am missing.
Rich
On Mon, Apr 16, 2018 at 3:45 PM, Mike Drew <[1]MikeLDrew at aol.com>
wrote:
Rich,
Your making a fantastic argument for either NEVER using a Centerforce
clutch, or ALWAYS using a Centerforce flywheel with a Centerforce
clutch!
I know some people who had flywheels drilled for Centerforce clutches
by a machinist. The holes werenat perfect, the clutches werenat
centered and the motors shook like a wet dog, wiping out the bearings
in no time.A
Mike
Sent from my iPad
On Apr 16, 2018, at 15:41, Rich Hoppe <[2]richbhoppe at gmail.com> wrote:
I didn't think this would be a problem.
I will have my cadd tech look at it again and let you know.
On Mon, Apr 16, 2018 at 3:36 PM, Mike Drew <[3]MikeLDrew at aol.com>
wrote:
Rich,
Document came through this time (at least to me as you sent it to my
address as well as to the forum)
Iam not a machinist so I canat make out the Units of measure. Looks
like perhaps inches and minutes?A I would expect thousandths of an
inch, but that doesnat appear to be what they are?
Mike
Sent from my iPad
> On Apr 16, 2018, at 15:06, Rich Hoppe <[4]richbhoppe at gmail.com>
wrote:
>
>A A Ok I am trying again.
>
>A A On Mon, Apr 16, 2018 at 2:57 PM, Mike Drew
<[1][5]MikeLDrew at aol.com>
>A A wrote:
>
>A A Seriously?
>A A You sent me a huge (30 mb!!!) blueprint of a neighborhood???
>A A Uh...no. :)
>A A Mike
>A A Sent from my iPad
>A A On Apr 16, 2018, at 14:50, Rich Hoppe
<[2][6]richbhoppe at gmail.com> wrote:
>
>A A ok see if this works
>A A On Mon, Apr 16, 2018 at 2:42 PM, Mike Drew
<[3][7]MikeLDrew at aol.com>
>A A wrote:
>
>A A A Rich,
>A A A You didnat include the attachment, just a link to Google
docs where
>A A A we are afforded the opportunity to create an account.
>A A A Can you just attach the actual PDF file?AA (The forum
software might
>A A A not support PDF and you might have to convert to PDF....?
>A A A Mike
>A A A Sent from my iPad
>> On Apr 16, 2018, at 14:17, Rich Hoppe
<[4][8]richbhoppe at gmail.com>
>A A A wrote:
>>
>> AA A Just thought someone might what to add this to a data bank.
>> AA A This is the flywheel hole alignment for centerforce.
>> AA A Rich[1]Preview attachment flywheel.pdf
>> AA A [?ui=2&ik=d550393810&view=snatt&th=162d0495ae08
>A A A 1a41&att
>> AA A id=0.1&disp=thd&zw&stw=800]
>> AA A [cleardot.gif]
>> AA A PDF
>> AA A flywheel.pdf
>> AA A 108 KB
>>
>> References
>>
>> AA A 1. [5][9]https://mail.google.com/mail/u
>A A A /0/?ui=2&ik=d550393810&view=att&th=162d0495ae081a41&attid=0
.
>A A A 1&disp=safe&zw
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> [6][10]DeTomaso at server.detomasolist.com
>> [7][11]http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe,
>A A A etc.) use the links above.
>>
>> Members who post to this list grant license to the list to
forward
>A A A any message posted here to all past, current, or future
members of
>A A A the list. They also grant the list owner permission to
maintain an
>A A A archive or approve the archiving of list messages.
>
>A A <01 OCEscan694.pdf>
>
> References
>
>A A 1. mailto:[12]MikeLDrew at aol.com
>A A 2. mailto:[13]richbhoppe at gmail.com
>A A 3. mailto:[14]MikeLDrew at aol.com
>A A 4. mailto:[15]richbhoppe at gmail.com
>A A 5. [16]https://mail.google.com/mail/u
/0/?ui=2&ik=d550393810&view=att&th=162d0495ae081a41&attid=0.
1&disp=safe&zw
>A A 6. mailto:[17]DeTomaso at server.detomasolist.com
>A A 7. [18]http://server.detomasolist.com
/mailman/listinfo/detomaso
> <DOC041618-041618-004.pdf>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [19]DeTomaso at server.detomasolist.com
> [20]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:MikeLDrew at aol.com
2. mailto:richbhoppe at gmail.com
3. mailto:MikeLDrew at aol.com
4. mailto:richbhoppe at gmail.com
5. mailto:MikeLDrew at aol.com
6. mailto:richbhoppe at gmail.com
7. mailto:MikeLDrew at aol.com
8. mailto:richbhoppe at gmail.com
9. https://mail.google.com/mail/u
10. mailto:DeTomaso at server.detomasolist.com
11. http://server.detomasolist.com/mailman/listinfo/detomaso
12. mailto:MikeLDrew at aol.com
13. mailto:richbhoppe at gmail.com
14. mailto:MikeLDrew at aol.com
15. mailto:richbhoppe at gmail.com
16. https://mail.google.com/mail/u/0/?ui=2&ik=d550393810&view=att&th=162d0495ae081a41&attid=0.1&disp=safe&zw
17. mailto:DeTomaso at server.detomasolist.com
18. http://server.detomasolist.com/mailman/listinfo/detomaso
19. mailto:DeTomaso at server.detomasolist.com
20. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list