[DeTomaso] Attaching ZF Vent tube
Jim Kosloskey
jim.kosloskey at jim-kosloskey.com
Tue Sep 26 13:04:12 EDT 2017
Larry,
Thanks.
I don't have the compression fitting nor the bracket. I suspect those were
left out when the car was restored.
Peter DeMayo suggested contacting Hall Pantera and maybe I will to get the
needed parts.
Jim Kosloskey
1974 L Yellow # 6949
-----Original Message-----
From: Larry Stock [mailto:larrys at panteraparts.com]
Sent: Tuesday, September 26, 2017 12:51 PM
To: Jim Kosloskey <jim.kosloskey at jim-kosloskey.com>;
detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Attaching ZF Vent tube
There should be a slip fit compression fitting that fits into the vent hole
and a small bracket that goes over a rear transmission stud and bolts the
tube in place.
Larry
On 9/26/17, 8:56 AM, "DeTomaso on behalf of Jim Kosloskey"
<detomaso-bounces at server.detomasolist.com on behalf of
jim.kosloskey at jim-kosloskey.com> wrote:
> All,
>
>
> The vent tube attached to my ZF has disappeared.
>
>
> I have a new tube and now I have these questions:
>
>
> 1. Is there an adapter which goes into the ZF vent hole or do I
> just push the tube into the hole?
>
> 2. Is the tube then affixed somewhere to keep it from blowing
> away and if so how and where is it affixed?
>
>
> Thanks,
>
>
> Jim Kosloskey
>
>
> 1974 Yellow Pantera L #6949
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA Posted emails must not
>exceed 1.5 Megabytes DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.)
>use the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.
More information about the DeTomaso
mailing list