[DeTomaso] Attaching ZF Vent tube

[Larry Stock]

There should be a slip fit compression fitting that fits into the vent
hole and a small bracket that goes over a rear transmission stud and bolts
the tube in place.
Larry

On 9/26/17, 8:56 AM, "DeTomaso on behalf of Jim Kosloskey"
<detomaso-bounces at server.detomasolist.com on behalf of
jim.kosloskey at jim-kosloskey.com> wrote:

>   All,
>
>
>   The vent tube attached to my ZF has disappeared.
>
>
>   I have a new tube and now I have these questions:
>
>
>   1.       Is there an adapter which goes into the ZF vent hole or do I
>   just push the tube into the hole?
>
>   2.       Is the tube then affixed somewhere to keep it from blowing
>   away and if so how and where is it affixed?
>
>
>   Thanks,
>
>
>   Jim Kosloskey
>
>
>   1974 Yellow Pantera L #6949
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 07162P Transaxle Vent Tube.jpg
Type: image/jpeg
Size: 38964 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20170926/46dd1c95/attachment.jpg>