[DeTomaso] Adjusting front hood latch

[Mike Drew]

Jim,

Looking at your photo, it appears as though somebody has installed a secondary release cable, but it appears to be hooked up in the wrong place and pulling the wrong direction?????

Inspect and verify operation and let us know how it works?

Mike

Sent from my iPad

> On Sep 11, 2017, at 13:13, Jim Kosloskey <jim.kosloskey at jim-kosloskey.com> wrote:
> 
>   All,
> 
> 
>   The front hood latch is not latching.
> 
> 
>   Almost looks like the latching mechanism needs adjusting but I do not
>   know how to adjust.
> 
> 
>   It appears the pin on the hood is actually catching the upper `tine' of
>   the front `fork' of the latch. Either that or the back `fork' is not
>   opening up enough to allow the pin to slip behind it. Any way that is
>   my take.
> 
> 
>   I have attached a picture of the latch in the open position. It just
>   does not seem right.
> 
> 
>   Was working fine last time I opened the front hood about a month ago.
> 
> 
>   Are there directions for adjusting this latching mechanism somewhere?
> 
> 
>   Thanks,
> 
> 
>   Jim Kosloskey
> 
>   1974 Pantera L Yellow #6949
> <IMG_0635.JPG>
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.