[DeTomaso] Your opinion is requested... and still looking for stock early 72 seats
Julian Kift
julian_kift at hotmail.com
Sun Oct 22 17:57:34 EDT 2017
Ah yes, I redid the internal firewall and rocker panels in my old GT40 with that stuff, it looked good when done, but somewhat different texture than the felt
Julian
________________________________
From: Doug <doug351c at gmail.com>
Sent: Sunday, October 22, 2017 2:54 PM
To: detomaso at server.detomasolist.com
Cc: 'Ken Green'; 'Julian Kift'; david.hofman at cox.net; jderyke at aol.com
Subject: RE: [DeTomaso] Your opinion is requested... and still looking for stock early 72 seats
Go to an auto upholstery shop and ask for black "backless carpet".
It looks and feels like a very thick felt but is far more durable and stretches in all directions.
It's typically used to line the trunks of high-end autos.
I used it with the attached seam lines and adhered it using 3M spray Trim Adhesive #08074.
I folded it 4 inches or so over the back side of the tub so it's gentle on whatever fenderwell finish you have.
I found no need for the Dsus fasteners so I covered right over the holes in the tub.
It looks and wears great.
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf Of Ken Green via DeTomaso
Sent: Sunday, October 22, 2017 2:13 PM
To: Julian Kift <julian_kift at hotmail.com>; david.hofman at cox.net; jderyke at aol.com; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Your opinion is requested... and still looking for stock early 72 seats
Julian,
Any thoughts on grades of felt? I did a little looking a while back and there are lots of variations. There were some very strong felts, but I'm not sure they can stretch to fit a curved surface.
Ken
-------------- next part --------------
Ah yes, I redid the internal firewall and rocker panels in my old GT40
with that stuff, it looked good when done, but somewhat different
texture than the felt
Julian
__________________________________________________________________
From: Doug <doug351c at gmail.com>
Sent: Sunday, October 22, 2017 2:54 PM
To: detomaso at server.detomasolist.com
Cc: 'Ken Green'; 'Julian Kift'; david.hofman at cox.net; jderyke at aol.com
Subject: RE: [DeTomaso] Your opinion is requested... and still looking
for stock early 72 seats
Go to an auto upholstery shop and ask for black "backless carpet".
It looks and feels like a very thick felt but is far more durable and
stretches in all directions.
It's typically used to line the trunks of high-end autos.
I used it with the attached seam lines and adhered it using 3M spray
Trim Adhesive #08074.
I folded it 4 inches or so over the back side of the tub so it's gentle
on whatever fenderwell finish you have.
I found no need for the Dsus fasteners so I covered right over the
holes in the tub.
It looks and wears great.
Doug Braun
Blue 73L #5505
-----Original Message-----
From: DeTomaso [[1]mailto:detomaso-bounces at server.detomasolist.com] On
Behalf Of Ken Green via DeTomaso
Sent: Sunday, October 22, 2017 2:13 PM
To: Julian Kift <julian_kift at hotmail.com>; david.hofman at cox.net;
jderyke at aol.com; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Your opinion is requested... and still looking
for stock early 72 seats
Julian,
Any thoughts on grades of felt? I did a little looking a while
back and there are lots of variations. There were some very strong
felts, but I'm not sure they can stretch to fit a curved surface.
Ken
References
1. mailto:detomaso-bounces at server.detomasolist.com
More information about the DeTomaso
mailing list