[DeTomaso] How much has EFI advanced over the past few years?
jgkrenton at comcast.net
jgkrenton at comcast.net
Sat Oct 14 10:55:31 EDT 2017
Charlie:
http://www.fuelairspark.com/fas/fasttm-ez-efir-fuel-base-kithtml/
This is supposed to be one of the better systems similar to what you describe. I don't have any experience with it, maybe other's do.
I'm running a Pro-M port injected sequential system. It seems to run well, but was a complex installation. (My turbos created plenty of challenges)
http://www.promracing.com/
Good luck!
Jeff 2467
----- Original Message -----
From: "Charles McCall" <charlesmccall at gmail.com>
To: detomaso at server.detomasolist.com
Sent: Saturday, October 14, 2017 5:52:13 AM
Subject: [DeTomaso] How much has EFI advanced over the past few years?
What's the current state of advancement in the fuel injection world?
Has someone perfected a bolt-on system that can substitute a 4bbl carb, can
be installed in minutes, only requires a couple of wires and an exhaust
bung, and that's it?
It would automatically map itself by just driving around, and give
absolutely crisp performance. It wouldn't require fiddling, and would work
just as well as a carb that's perfectly, absolutely, dead-nuts on.
Oh, and it would cost less than $50. Just kidding, but perhaps under $1000
for everything. Anyone have any first-hand experience?
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Charlie:
[1]http://www.fuelairspark.com/fas/fasttm-ez-efir-fuel-base-kithtml/
This is supposed to be one of the better systems similar to what you
describe. I don't have any experience with it, maybe other's do.
I'm running a Pro-M port injected sequential system. It seems to run
well, but was a complex installation. (My turbos created plenty of
challenges)
[2]http://www.promracing.com/
Good luck!
Jeff 2467
__________________________________________________________________
From: "Charles McCall" <charlesmccall at gmail.com>
To: detomaso at server.detomasolist.com
Sent: Saturday, October 14, 2017 5:52:13 AM
Subject: [DeTomaso] How much has EFI advanced over the past few years?
What's the current state of advancement in the fuel injection world?
Has someone perfected a bolt-on system that can substitute a 4bbl carb,
can
be installed in minutes, only requires a couple of wires and an exhaust
bung, and that's it?
It would automatically map itself by just driving around, and give
absolutely crisp performance. It wouldn't require fiddling, and would
work
just as well as a carb that's perfectly, absolutely, dead-nuts on.
Oh, and it would cost less than $50. Just kidding, but perhaps under
$1000
for everything. Anyone have any first-hand experience?
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://www.fuelairspark.com/fas/fasttm-ez-efir-fuel-base-kithtml/
2. http://www.promracing.com/
More information about the DeTomaso
mailing list