[DeTomaso] update on what I thought was failed ignition switch
Pantdino
pantdino at aol.com
Wed Nov 15 15:36:07 EST 2017
I'm going to order one.
Thanks for the tip
Original does not look very trustworthy :)
Jim
-----Original Message-----
From: Garth Rodericks <garth_rodericks at yahoo.com>
To: pantdino <pantdino at aol.com>; DeTomaso Mail List <detomaso at server.detomasolist.com>
Sent: Wed, Nov 15, 2017 9:07 am
Subject: update on what I thought was failed ignition switch
I replaced my black terminal block ("black connector junction thing") with a "Replacement Up-grade Terminal Strip" available from Pantera Electronics.
http://www.pantera-electronics.com/isc.htm (see bottom of page).
The original terminal block has screws that grind directly into the wire strands, splaying and breaking them which causes increased resistance and heat, which subsequently melts things and creates a fire hazard - this happened to me on a drive and my cabin immediately filled with smoke and almost caused a fire.
The replacement terminal block has a clamping plate that the screws press against to clamp the wires in place without breaking their strands.
Two enthusiastic thumbs up!
Cheers!
Garth
#4033
-------------- next part --------------
I'm going to order one.
Thanks for the tip
Original does not look very trustworthy :)
Jim
-----Original Message-----
From: Garth Rodericks <garth_rodericks at yahoo.com>
To: pantdino <pantdino at aol.com>; DeTomaso Mail List
<detomaso at server.detomasolist.com>
Sent: Wed, Nov 15, 2017 9:07 am
Subject: update on what I thought was failed ignition switch
I replaced my black terminal block ("black connector junction thing")
with a "Replacement Up-grade Terminal Strip" available from Pantera
Electronics.
[1]http://www.pantera-electronics.com/isc.htm (see bottom of page).
The original terminal block has screws that grind directly into the
wire strands, splaying and breaking them which causes increased
resistance and heat, which subsequently melts things and creates a fire
hazard - this happened to me on a drive and my cabin immediately filled
with smoke and almost caused a fire.
The replacement terminal block has a clamping plate that the screws
press against to clamp the wires in place without breaking their
strands.
Two enthusiastic thumbs up!
Cheers!
Garth
#4033
References
1. http://www.pantera-electronics.com/isc.htm
More information about the DeTomaso
mailing list