[DeTomaso] SS ZF linkage turnbuckle???

[Julian Kift]

Larry,

The 'fabricate it' comment was in response to Larry Finch's request for a turnbuckle, not the splined U-joints where he has the Flaming River pieces and wanted a stainless turnbuckle to match.

Julian

> On May 22, 2017, at 1:24 PM, Larry Stock <larrys at panteraparts.com> wrote:
> 
> Maybe I¹m the wrong Larry here. I don¹t understand this concept, maybe
> start with some forging¹s. I don¹t even think using SS Tubing is even
> feasible here so I probably shouldn¹t even respond.  Easy to fabricate is
> not at all true. Jack, you know what it took just to fit new bearings into
> existing U-joints, not easy at all. Then it is not easy to have proper
> Broaching capabilities in their region to broach the ID Splines. Then you
> have the issues to engineer a locking nut mechanism, and then you add the
> liability of attaching a couple of these to your steering shaft mechanism,
> another good reason for US manufactures to buy oversea¹s to limit your USA
> product liability. Do it yourself so the owner is responsible, then cavat
> emptor.
> Larry Stock
> 
> On 5/22/17, 12:10 PM, "DeTomaso on behalf of Jack DeRyke via DeTomaso"
> <detomaso-bounces at server.detomasolist.com on behalf of
> detomaso at server.detomasolist.com> wrote:
> 
>>  Fabricate it, Larry- you have all the specs and its only a chunk of
>>  thickwall ss tubing tapped correctly. Any good machine shop should be
>>  able to knock one out in an afternoon. If you're going for bling, I've
>>  also seen the stock one successfully chromed.
>>  -----Original Message-----
>>  From: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
>>  To: Email List Address For Posting <detomaso at server.detomasolist.com>
>>  Sent: Sun, May 21, 2017 10:08 pm
>>  Subject: [DeTomaso] SS ZF linkage turnbuckle???
>>  All,
>>  Does anyone have a source for a stainless steel turnbuckle and
>>  adjusting nuts for the ZF shift linkage?
>>  I am upgrading to the stainless steel flaming river u-joints and
>>  thought a stainless turnbuckle would be a good match.
>>  I have searched for turnbuckle, screwjack, tie rod adjusting sleeve. I
>>  have searched at McMaster Carr, aircraft Spruce, multiple suspension
>>  websites, multiple Heim joint sites and I come up with nothing.
>>  Thread size is M14x1.5 LH/RH female threads
>>  Anyone got anything?
>>  Larry
>>  Sent from me using a magic, handheld electronic gizmo.
>>  _______________________________________________
>>  Detomaso Email List is not managed by POCA
>>  Posted emails must not exceed 1.5 Megabytes
>>  DeTomaso mailing list
>>  [1]DeTomaso at server.detomasolist.com
>>  [2]http://server.detomasolist.com/mailman/listinfo/detomaso
>>  To manage your subscription (change email address, unsubscribe, etc.)
>>  use the links above.
>>  Members who post to this list grant license to the list to forward any
>>  message posted here to all past, current, or future members of the
>>  list. They also grant the list owner permission to maintain an archive
>>  or approve the archiving of list messages.
>> 
>> References
>> 
>>  1. mailto:DeTomaso at server.detomasolist.com
>>  2. http://server.detomasolist.com/mailman/listinfo/detomaso
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use
>> the links above.
>> 
>> Members who post to this list grant license to the list to forward any
>> message posted here to all past, current, or future members of the list.
>> They also grant the list owner permission to maintain an archive or
>> approve the archiving of list messages.
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.