[DeTomaso] SS ZF linkage turnbuckle???
jderyke at aol.com
jderyke at aol.com
Mon May 22 15:10:30 EDT 2017
Fabricate it, Larry- you have all the specs and its only a chunk of thickwall ss tubing tapped correctly. Any good machine shop should be able to knock one out in an afternoon. If you're going for bling, I've also seen the stock one successfully chromed.
-----Original Message-----
From: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
To: Email List Address For Posting <detomaso at server.detomasolist.com>
Sent: Sun, May 21, 2017 10:08 pm
Subject: [DeTomaso] SS ZF linkage turnbuckle???
All,
Does anyone have a source for a stainless steel turnbuckle and adjusting nuts for the ZF shift linkage?
I am upgrading to the stainless steel flaming river u-joints and thought a stainless turnbuckle would be a good match.
I have searched for turnbuckle, screwjack, tie rod adjusting sleeve. I have searched at McMaster Carr, aircraft Spruce, multiple suspension websites, multiple Heim joint sites and I come up with nothing.
Thread size is M14x1.5 LH/RH female threads
Anyone got anything?
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Fabricate it, Larry- you have all the specs and its only a chunk of
thickwall ss tubing tapped correctly. Any good machine shop should be
able to knock one out in an afternoon. If you're going for bling, I've
also seen the stock one successfully chromed.
-----Original Message-----
From: Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
To: Email List Address For Posting <detomaso at server.detomasolist.com>
Sent: Sun, May 21, 2017 10:08 pm
Subject: [DeTomaso] SS ZF linkage turnbuckle???
All,
Does anyone have a source for a stainless steel turnbuckle and
adjusting nuts for the ZF shift linkage?
I am upgrading to the stainless steel flaming river u-joints and
thought a stainless turnbuckle would be a good match.
I have searched for turnbuckle, screwjack, tie rod adjusting sleeve. I
have searched at McMaster Carr, aircraft Spruce, multiple suspension
websites, multiple Heim joint sites and I come up with nothing.
Thread size is M14x1.5 LH/RH female threads
Anyone got anything?
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[1]DeTomaso at server.detomasolist.com
[2]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:DeTomaso at server.detomasolist.com
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list