[DeTomaso] Non pantera suspension question
Kurt Byrnes
kdb at kbyrnes.com
Thu Mar 30 23:57:29 EDT 2017
Unfortunately, no. Welding the diff would be very difficult as well.
On 3/30/2017 11:45 PM, Dave Londry wrote:
> Is a limited-slip diff available/legal in your class Kurt?
> Dave
>
>
> On 3/30/17 8:20 PM, Kurt Byrnes wrote:
>> I've been struggling to get my vintage race car to hookup coming out
>> corners. It seems to want to lift the inside rear wheel enough that
>> I loose traction and just spin the tire instead of accelerating out
>> of the corner. You can hear it pretty well a little past 50 seconds
>> in this video. https://www.youtube.com/watch?v=NQDhmizu3Go I'm not
>> sure if I'm driving harder or it's getting worse but I do notice it
>> more and more. It does seem to be more pronounced in right hand turns.
>>
>> I've lowered the car a couple inches at both ends, have stiffer front
>> springs and a 7/8" solid roll bar on the front. I changed the rear
>> leaf springs to a slightly newer model that are supposed to be a
>> little stiffer.
>>
>> Not sure what to try next. I have to run the original suspension
>> geometry and lever shocks but I could change the oil in the shocks to
>> either thicker or thinner viscosity. Stiffer or softer front
>> springs? Any other suggestions?
>>
>> Kurt
>>
>> _______________________________________________
>>
>>
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>> To manage your subscription (change email address, unsubscribe, etc.)
>> use the links above.
>>
>> Members who post to this list grant license to the list to forward
>> any message posted here to all past, current, or future members of
>> the list. They also grant the list owner permission to maintain an
>> archive or approve the archiving of list messages.
>>
>>
>
More information about the DeTomaso
mailing list