[DeTomaso] MSD DIZZY

jderyke at aol.com jderyke at aol.com
Tue Mar 7 14:55:21 EST 2017




-----Original Message-----
From: bens1 via DeTomaso <detomaso at server.detomasolist.com>
To: gaino <gaino at earthlink.net>; detomaso <detomaso at server.detomasolist.com>
Sent: Tue, Mar 7, 2017 9:33 am
Subject: Re: [DeTomaso] MSD DIZZY

Yes I have opened up the gap on the plugs since first running it
Maybe that is why the ball stays in place now.. never thought of that
Bob

-----Original Message-----
From: bill gaino <gaino at earthlink.net>
To: rcbsons1 <rcbsons1 at aol.com>
Sent: Tue, Mar 7, 2017 9:21 am
Subject: Re: [DeTomaso] MSD DIZZY
Bob, Amaizing that 1362 was skipping bad and I found the ball
destroyed. I figured I had found the problem. I replaced the cap and it
did not fix the skip, turned out after I replaced plugs and gapped at
.048-.050 It was right. The MSD likes the big gap and it will run fine
witout the ball! Bill
[1]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&
fref=ts
If you want it slick. [2]www.slickpaint.com like us on facebook
-----Original Message-----
>From: bens1 via DeTomaso <[3]detomaso at server.detomasolist.com>
>Sent: Mar 7, 2017 12:14 PM
>To: [4]detomaso at server.detomasolist.com
>Subject: [DeTomaso] MSD DIZZY
>
> I have actually blown up the carbon ball on my
> MSD cap several times ( I do run an off Road MSD
> Coil) so a lot of power.. it still ran fine.. only found out
> when checking on things.... after doing this several times
> it finally put enough crud inside the cap it quit.. put a new
> pickup on it and it is fine now.. I have not blown up a cap
> ball recently.. maybe driving too easy at 7500 rpm :)
> Bob Benson #3 Black Pantera

References

1. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
2. http://www.slickpaint.com/
3. mailto:detomaso at server.detomasolist.com
4. mailto:detomaso at server.detomasolist.com
_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
   -----Original Message-----
   From: bens1 via DeTomaso <detomaso at server.detomasolist.com>
   To: gaino <gaino at earthlink.net>; detomaso
   <detomaso at server.detomasolist.com>
   Sent: Tue, Mar 7, 2017 9:33 am
   Subject: Re: [DeTomaso] MSD DIZZY
   Yes I have opened up the gap on the plugs since first running it
   Maybe that is why the ball stays in place now.. never thought of that
   Bob
   -----Original Message-----
   From: bill gaino <[1]gaino at earthlink.net>
   To: rcbsons1 <[2]rcbsons1 at aol.com>
   Sent: Tue, Mar 7, 2017 9:21 am
   Subject: Re: [DeTomaso] MSD DIZZY
   Bob, Amaizing that 1362 was skipping bad and I found the ball
   destroyed. I figured I had found the problem. I replaced the cap and it
   did not fix the skip, turned out after I replaced plugs and gapped at
   .048-.050 It was right. The MSD likes the big gap and it will run fine
   witout the ball! Bill
   [1][3]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=
   ts&
   fref=ts
   If you want it slick. [2][4]www.slickpaint.com like us on facebook
   -----Original Message-----
   >From: bens1 via DeTomaso <[3][5]detomaso at server.detomasolist.com>
   >Sent: Mar 7, 2017 12:14 PM
   >To: [4][6]detomaso at server.detomasolist.com
   >Subject: [DeTomaso] MSD DIZZY
   >
   > I have actually blown up the carbon ball on my
   > MSD cap several times ( I do run an off Road MSD
   > Coil) so a lot of power.. it still ran fine.. only found out
   > when checking on things.... after doing this several times
   > it finally put enough crud inside the cap it quit.. put a new
   > pickup on it and it is fine now.. I have not blown up a cap
   > ball recently.. maybe driving too easy at 7500 rpm :)
   > Bob Benson #3 Black Pantera
   References
   1.
   [7]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&
   fref=ts
   2. [8]http://www.slickpaint.com/
   3. [9]mailto:detomaso at server.detomasolist.com
   4. [10]mailto:detomaso at server.detomasolist.com
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [11]DeTomaso at server.detomasolist.com
   [12]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:gaino at earthlink.net
   2. mailto:rcbsons1 at aol.com
   3. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&
   4. http://www.slickpaint.com/
   5. mailto:detomaso at server.detomasolist.com
   6. mailto:detomaso at server.detomasolist.com
   7. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
   8. http://www.slickpaint.com/
   9. mailto:detomaso at server.detomasolist.com?
  10. mailto:detomaso at server.detomasolist.com?
  11. mailto:DeTomaso at server.detomasolist.com
  12. http://server.detomasolist.com/mailman/listinfo/detomaso
-------------- next part --------------
A non-text attachment was scrubbed...
Name: MSD Cap worn out @ 2000 miles.rtf
Type: text/rtf
Size: 2708 bytes
Desc: not available
URL: <http://server.detomasolist.com/pipermail/detomaso/attachments/20170307/ed9f1283/attachment.bin>


More information about the DeTomaso mailing list