[DeTomaso] MSD DIZZY
rcbsons1 at aol.com
rcbsons1 at aol.com
Tue Mar 7 12:33:04 EST 2017
Yes I have opened up the gap on the plugs since first running it
Maybe that is why the ball stays in place now.. never thought of that
Bob
-----Original Message-----
From: bill gaino <gaino at earthlink.net>
To: rcbsons1 <rcbsons1 at aol.com>
Sent: Tue, Mar 7, 2017 9:21 am
Subject: Re: [DeTomaso] MSD DIZZY
Bob, Amaizing that 1362 was skipping bad and I found the ball destroyed. I figured I had found the problem. I replaced the cap and it did not fix the skip, turned out after I replaced plugs and gapped at .048-.050 It was right. The MSD likes the big gap and it will run fine witout the ball! Bill
https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
If you want it slick. www.slickpaint.com like us on facebook
-----Original Message-----
>From: bens1 via DeTomaso <detomaso at server.detomasolist.com>
>Sent: Mar 7, 2017 12:14 PM
>To: detomaso at server.detomasolist.com
>Subject: [DeTomaso] MSD DIZZY
>
> I have actually blown up the carbon ball on my
> MSD cap several times ( I do run an off Road MSD
> Coil) so a lot of power.. it still ran fine.. only found out
> when checking on things.... after doing this several times
> it finally put enough crud inside the cap it quit.. put a new
> pickup on it and it is fine now.. I have not blown up a cap
> ball recently.. maybe driving too easy at 7500 rpm :)
> Bob Benson #3 Black Pantera
-------------- next part --------------
Yes I have opened up the gap on the plugs since first running it
Maybe that is why the ball stays in place now.. never thought of that
Bob
-----Original Message-----
From: bill gaino <gaino at earthlink.net>
To: rcbsons1 <rcbsons1 at aol.com>
Sent: Tue, Mar 7, 2017 9:21 am
Subject: Re: [DeTomaso] MSD DIZZY
Bob, Amaizing that 1362 was skipping bad and I found the ball
destroyed. I figured I had found the problem. I replaced the cap and it
did not fix the skip, turned out after I replaced plugs and gapped at
.048-.050 It was right. The MSD likes the big gap and it will run fine
witout the ball! Bill
[1]https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&
fref=ts
If you want it slick. [2]www.slickpaint.com like us on facebook
-----Original Message-----
>From: bens1 via DeTomaso <[3]detomaso at server.detomasolist.com>
>Sent: Mar 7, 2017 12:14 PM
>To: [4]detomaso at server.detomasolist.com
>Subject: [DeTomaso] MSD DIZZY
>
> I have actually blown up the carbon ball on my
> MSD cap several times ( I do run an off Road MSD
> Coil) so a lot of power.. it still ran fine.. only found out
> when checking on things.... after doing this several times
> it finally put enough crud inside the cap it quit.. put a new
> pickup on it and it is fine now.. I have not blown up a cap
> ball recently.. maybe driving too easy at 7500 rpm :)
> Bob Benson #3 Black Pantera
References
1. https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts
2. http://www.slickpaint.com/
3. mailto:detomaso at server.detomasolist.com
4. mailto:detomaso at server.detomasolist.com
More information about the DeTomaso
mailing list