[DeTomaso] Best screws and clip on nuts for the grill???

Ken Green kenn_green at yahoo.com
Thu Jun 1 12:58:24 EDT 2017 

I know the clip nuts are common, but McMaster has some very nice black oxide oval head screws with the correct head diameter:
https://www.mcmaster.com/#91775a697/=17vqqmp

Not sure how common these screws are.  I don't need 100, but maybe just give away most of what I don't use.
Ken

      From: Mike Drew <MikeLDrew at aol.com>
 To: Ken Green <kenn_green at yahoo.com> 
Cc: "detomaso at detomasolist.com" <detomaso at detomasolist.com>
 Sent: Thursday, June 1, 2017 9:24 AM
 Subject: Re: [DeTomaso] Best screws and clip on nuts for the grill???
   
Yup, I think that's it. But you don't have to get them on the internet--these are readily available at any good hardware store.....

Mike

Sent from my iPad

> On Jun 1, 2017, at 09:22, Ken Green via DeTomaso <detomaso at server.detomasolist.com> wrote:
> 
>  There are a couple of what I assume are the original clip-on nuts still
>  on the body, but after all these years, I can't be sure they are
>  original.  Seems unlikely that the screws just engaged the body (but
>  possible)?
>  McMaster has these in 8-32 that should just slide over the sheet metal:
>  [1]https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
>  Seems like they would work with machine screws, the only issue I see is
>  that the sheet metal screws would be self centering because of the
>  point.
>  Ken
>    __________________________________________________________________
> 
>  From: Mike Drew <MikeLDrew at aol.com>
>  To: Ken Green <kenn_green at yahoo.com>
>  Cc: "detomaso at detomasolist.com" <detomaso at detomasolist.com>
>  Sent: Wednesday, May 31, 2017 10:14 PM
>  Subject: Re: [DeTomaso] Best screws and clip on nuts for the grill???
>  Ken,
>  Machine screws won't work without using tinnerman nuts, I don't think.
>  The original setup used sheetmetal screws and clips, readily available
>  at Ace hardware....
>  Mike
>  Sent from my iPad
>> On May 31, 2017, at 19:02, Ken Green via DeTomaso
>  <[2]detomaso at server.detomasolist.com> wrote:
>> 
>> Need fasteners to re-attach the grill, later version with screws
>> through the grill into the body (versus studs and nuts on the
>  inside).
>> I assume the originals are metric, but #8 screws look OK, and have
>  the
>> right head diameter.  Need to choose between sheet metal screws and
>> 8-32 machine screws, and corresponding clip on nuts.  Any
>  suggestions?
>> Thanks,
>> Ken
>>  __________________________________________________________________
>> 
>> 
> 
> References
> 
>  1. https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
>  2. mailto:detomaso at server.detomasolist.com
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.


   
-------------- next part --------------
   I know the clip nuts are common, but McMaster has some very nice black
   oxide oval head screws with the correct head diameter:
   [1]https://www.mcmaster.com/#91775a697/=17vqqmp
   Not sure how common these screws are.  I don't need 100, but maybe just
   give away most of what I don't use.
   Ken
     __________________________________________________________________

   From: Mike Drew <MikeLDrew at aol.com>
   To: Ken Green <kenn_green at yahoo.com>
   Cc: "detomaso at detomasolist.com" <detomaso at detomasolist.com>
   Sent: Thursday, June 1, 2017 9:24 AM
   Subject: Re: [DeTomaso] Best screws and clip on nuts for the grill???
   Yup, I think that's it. But you don't have to get them on the
   internet--these are readily available at any good hardware store.....
   Mike
   Sent from my iPad
   > On Jun 1, 2017, at 09:22, Ken Green via DeTomaso
   <[2]detomaso at server.detomasolist.com> wrote:
   >
   >  There are a couple of what I assume are the original clip-on nuts
   still
   >  on the body, but after all these years, I can't be sure they are
   >  original.  Seems unlikely that the screws just engaged the body (but
   >  possible)?
   >  McMaster has these in 8-32 that should just slide over the sheet
   metal:
   >  [1][3]https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
   >  Seems like they would work with machine screws, the only issue I see
   is
   >  that the sheet metal screws would be self centering because of the
   >  point.
   >  Ken
   >    __________________________________________________________________
   >
   >  From: Mike Drew <[4]MikeLDrew at aol.com>
   >  To: Ken Green <[5]kenn_green at yahoo.com>
   >  Cc: "[6]detomaso at detomasolist.com" <[7]detomaso at detomasolist.com>
   >  Sent: Wednesday, May 31, 2017 10:14 PM
   >  Subject: Re: [DeTomaso] Best screws and clip on nuts for the
   grill???
   >  Ken,
   >  Machine screws won't work without using tinnerman nuts, I don't
   think.
   >  The original setup used sheetmetal screws and clips, readily
   available
   >  at Ace hardware....
   >  Mike
   >  Sent from my iPad
   >> On May 31, 2017, at 19:02, Ken Green via DeTomaso
   >  <[2][8]detomaso at server.detomasolist.com> wrote:
   >>
   >> Need fasteners to re-attach the grill, later version with screws
   >> through the grill into the body (versus studs and nuts on the
   >  inside).
   >> I assume the originals are metric, but #8 screws look OK, and have
   >  the
   >> right head diameter.  Need to choose between sheet metal screws and
   >> 8-32 machine screws, and corresponding clip on nuts.  Any
   >  suggestions?
   >> Thanks,
   >> Ken
   >>  __________________________________________________________________
   >>
   >>
   >
   > References
   >
   >  1. [9]https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
   >  2. mailto:[10]detomaso at server.detomasolist.com
   > _______________________________________________
   >
   >
   > Detomaso Email List is not managed by POCA
   > Posted emails must not exceed 1.5 Megabytes
   > DeTomaso mailing list
   > [11]DeTomaso at server.detomasolist.com
   > [12]http://server.detomasolist.com/mailman/listinfo/detomaso
   >
   > To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   >
   > Members who post to this list grant license to the list to forward
   any message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. https://www.mcmaster.com/#91775a697/=17vqqmp
   2. mailto:detomaso at server.detomasolist.com
   3. https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
   4. mailto:MikeLDrew at aol.com
   5. mailto:kenn_green at yahoo.com
   6. mailto:detomaso at detomasolist.com
   7. mailto:detomaso at detomasolist.com
   8. mailto:detomaso at server.detomasolist.com
   9. https://www.mcmaster.com/#catalog/123/3239/=17vq8gs
  10. mailto:detomaso at server.detomasolist.com
  11. mailto:DeTomaso at server.detomasolist.com
  12. http://server.detomasolist.com/mailman/listinfo/detomaso

More information about the DeTomaso mailing list