[DeTomaso] Torque specs for the pressure plate / new pilot install

[Mike Drew]

Further to this line of questioning, is the torque spec different for iron vs aluminum flywheels?

I didn't trust the relatively small Ford bolts in my aluminum flywheel so had it machined to accept larger Chevy bolts which also required enlarging the holes in the clutch. 

Mike

Sent from my iPhone

On Jan 29, 2017, at 10:23, "Joseph F. Byrd, Jr." <byrdjf at embarqmail.com> wrote:

> Just my curiousity;
> 
> as for installing the pilot bearing.  Would there be a desired press fit?
> And thus the crank female fit be reamed/honed to match the bearing?
> 
> As for the torques; would the flywheel bolts be 7/16-20 and the pressure
> plate bolts 5/16-18?
> 
> 
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
> Of Mike Thomas
> Sent: Sunday, January 29, 2017 14:10 PM
> To: detomaso at server.detomasolist.com
> Subject: [DeTomaso] Torque specs for the pressure plate / new pilot install
> 
> Just need a refresh on torque specs for the pressure plate.  I think it's 35
> lbs., but don't recall.  I know the fly is 80 lbs.
> 
> Test fitting the new pilot after struggles removing the old indicate this
> one will be every bit as tight a fit.  While not planning to remove it any
> time soon, is there anything I ought/could do to reduce it's resistance in
> the future?
> 
> Thanks all
> Mike Thomas
> Pres., Panteras Northwest
> Yellow '74 #6328
> 
> 
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5
> Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
> 
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
> 
> _______________________________________________
> 
> 
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
> 
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
> 
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.