[DeTomaso] Techno question: Rear Jack Plate

Charles Engles cengles at cox.net
Sun Jan 29 10:01:45 EST 2017


Dear Larry,


                  I am happy to know that the salacious aspects of the
deeply philosophical story of the protagonist were not lost on you.....!    


                                      Warmest cinematic regards,  Chuck
Engles  :-)





-----Original Message-----
From: Larry - Ohio Time [mailto:Larry at OhioTimeCorp.com] 
Sent: Sunday, January 29, 2017 8:11 AM
To: 'Charles Engles'; 'Will Kooiman'; 'Dennis Valdez'
Cc: 'detomaso'
Subject: RE: [DeTomaso] Techno question: Rear Jack Plate

<<plastics>>

That’s funny I always remember it this way.


"I have one word of advice for you, son:
Mrs. Robinson!"   The Graduate


Larry (graduate) - Cleveland


 


-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Charles Engles
Sent: Saturday, January 28, 2017 9:58 PM
To: 'Will Kooiman'; 'Dennis Valdez'
Cc: 'detomaso'
Subject: Re: [DeTomaso] Techno question: Rear Jack Plate

Dear Will,

               That is the goal:  Carefree jacking whenever it is needed!
I see lots of advantages to the plastic slab solution.  


                                  "I have one word of advice for you, son:
plastics!"   The Graduate


                                          Warmest regards, Chuck Engles



-----Original Message-----
From: Will Kooiman [mailto:will.kooiman at gmail.com]
Sent: Saturday, January 28, 2017 8:42 PM
To: Charles Engles; 'Dennis Valdez'
Cc: 'detomaso'
Subject: Re: [DeTomaso] Techno question: Rear Jack Plate

I did a similar modification to my car in the rear.  I didn¹t open it up and
weld a piece of rectangular tubing, but rather just welded a piece of 1/4²
plate.

Very easy, and now I don¹t worry about jacking in the rear.

On 1/28/17, 9:03 PM, "DeTomaso on behalf of Charles Engles"
<detomaso-bounces at server.detomasolist.com on behalf of cengles at cox.net>
wrote:

>Dear Dennis:   Thanks for sharing the pictures....and the pucks!
>Warmest
>regards,  Chuck Engles
>
>
>
>
>-----Original Message-----
>From: Dennis Valdez [mailto:sjcarguy60 at yahoo.com]
>Sent: Saturday, January 28, 2017 7:55 PM
>To: cengles at cox.net
>Cc: detomaso
>Subject: Re: [DeTomaso] Techno question: Rear Jack Plate
>
>Hockey pucks work well and can be carried easily in the frunk.
>
>One would probably work, but I use two side by side in front of the lip 
>on the rear cross member.  The pucks are just thicker than the lip and 
>are hard rubber so distribute the load well.
>
>See pictures
>
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA Posted emails must not 
>exceed 1.5 Megabytes DeTomaso mailing list 
>DeTomaso at server.detomasolist.com 
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) 
>use the links above.
>
>Members who post to this list grant license to the list to forward any 
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or 
>approve the archiving of list messages.


_______________________________________________


Detomaso Email List is not managed by POCA Posted emails must not exceed 1.5
Megabytes DeTomaso mailing list DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use
the links above.

Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.



More information about the DeTomaso mailing list