[DeTomaso] Tie rod thread size
Mike Drew
MikeLDrew at aol.com
Sun Feb 19 15:02:30 EST 2017
Tomas,
Sadly, the drawing doesn't have any details on that thread. I suspect there were many more engineering drawings of the individual components of the rack, and the specs would have been found there, but I don't have them.
I believe Larry Stock has a die he uses to repair damaged rack threads, and if so he should be able to tell us?
Mike
Sent from my iPad
> On Feb 19, 2017, at 11:58, Tomas Gunnarsson <guson at home.se> wrote:
>
> The detail shows the tie rod end thread but the question was for steering rack thread. Julian has answered it but can you zoom in on that part of the drawing for reference?
>
> Tomas
>
>
> <-----Ursprungligt Meddelande----->
> From: Mike Drew via DeTomaso [detomaso at server.detomasolist.com]
> Sent: 19/2/2017 7:29:57 AM
> To: tipo874a at msn.com
> Cc: detomaso at server.detomasolist.com;johnmckee at cox.net
> Subject: Re: [DeTomaso] Tie rod thread size
>
>
>
> > On Feb 18, 2017, at 22:13, L GRAY <tipo874a at msn.com> wrote:
> >
> > Julian,
> > The rack assembly is British so I'm putting my money on US fine 9/16" or 5/8" thread. Don't have a rack in front of me to check though.......
> >
>
> >>>As the original steering rack dork, I not only have a half-dozen racks here in various states at any given time, I also own the original (not a copy) De Tomaso engineering blueprint for the steering rack.
>
-------------- next part --------------
Tomas,
Sadly, the drawing doesn't have any details on that thread. I suspect
there were many more engineering drawings of the individual components
of the rack, and the specs would have been found there, but I don't
have them.
I believe Larry Stock has a die he uses to repair damaged rack threads,
and if so he should be able to tell us?
Mike
Sent from my iPad
On Feb 19, 2017, at 11:58, Tomas Gunnarsson <[1]guson at home.se> wrote:
The detail shows the tie rod end thread but the question was for
steering rack thread. Julian has answered it but can you zoom in on
that part of the drawing for reference?
Tomas
<-----Ursprungligt Meddelande----->
From: Mike Drew via DeTomaso [[2]detomaso at server.detomasolist.com]
Sent: 19/2/2017 7:29:57 AM
To: [3]tipo874a at msn.com
Cc: [4]detomaso at server.detomasolist.com;[5]johnmckee at cox.net
Subject: Re: [DeTomaso] Tie rod thread size
> On Feb 18, 2017, at 22:13, L GRAY <[6]tipo874a at msn.com> wrote:
>
> Julian,
> The rack assembly is British so I'm putting my money on US fine 9/16"
or 5/8" thread. Don't have a rack in front of me to check though.......
>
>>>As the original steering rack dork, I not only have a half-dozen
racks here in various states at any given time, I also own the original
(not a copy) De Tomaso engineering blueprint for the steering rack.
References
1. mailto:guson at home.se
2. mailto:detomaso at server.detomasolist.com
3. mailto:tipo874a at msn.com
4. mailto:detomaso at server.detomasolist.com
5. mailto:johnmckee at cox.net
6. mailto:tipo874a at msn.com
More information about the DeTomaso
mailing list