[DeTomaso] Tie rod thread size
Mike Drew
MikeLDrew at aol.com
Sun Feb 19 14:07:16 EST 2017
> On Feb 19, 2017, at 10:55, Scott Bell <scott at saccrestorations.net> wrote:
>
> More mis-information... 1/2-20 does NOT cross to a 14mm metric thread!!!!!
>>>And more to the point, the steering rack is NOT metric.
It is 1/2 UNF (1/2-20) and there is no metric anything that will fit. 1/2 inch is 12.7mm so if one was determined to kluge a metric tie rod end onto an SAE tie rod, I suppose it could be cut down and tapped for a 12mm tie rod end. But why would you ever do that???
Mike
>
More information about the DeTomaso
mailing list