[DeTomaso] Tie rod thread size

[John McKee]

Jack,
I have been looking for the adapter shaft that I think you may have sourced from Speedway but now they only have one with a 5/8" end for the hemi joint. Do you know of any other source that would have one with a 1/2" shaft?

John

Sent from my Verizon Wireless 4G LTE DROID
On Feb 19, 2017 12:23 AM, Jack DeRyke via DeTomaso <detomaso at server.detomasolist.com> wrote:
>
> Julian is correct; further, it is one of the few metric threads that cross-references to SAE. Our 1/2"-20 fine thread fits. I use SAE jam nuts and SAE heim-joints of that thread in my own steering with zero ill effects. Cheers- J Deryke 
>
>
> -----Original Message----- 
> From: Julian Kift <julian_kift at hotmail.com> 
> To: John McKee <johnmckee at cox.net>; detomaso <detomaso at server.detomasolist.com> 
> Sent: Sat, Feb 18, 2017 9:53 pm 
> Subject: Re: [DeTomaso] Tie rod thread size 
>
> I believe the tie rods are 14mm x 1.5 thread pitch. 
>
> Julian 
> __________________________________________________________________ 
>
> From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of 
> John McKee <johnmckee at cox.net> 
> Sent: Saturday, February 18, 2017 6:57 PM 
> To: detomaso at server.detomasolist.com 
> Subject: [DeTomaso] Tie rod thread size 
>
> Can anybody tell me the size of the threaded male end of the steering 
> rack? 
> I am working on a hemi-joint rod end conversion. 
>
> Thanks, 
> John 
> _______________________________________________ 
>
>
> Detomaso Email List is not managed by POCA 
> Posted emails must not exceed 1.5 Megabytes 
> DeTomaso mailing list 
> DeTomaso at server.detomasolist.com 
> http://server.detomasolist.com/mailman/listinfo/detomaso 
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above. 
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
>
>    Julian is correct; further, it is one of the few metric threads that 
>    cross-references to SAE. Our 1/2"-20 fine thread fits. I use SAE jam 
>    nuts and SAE heim-joints of that thread in my own steering with zero 
>    ill effects. Cheers- J Deryke 
>    -----Original Message----- 
>    From: Julian Kift <julian_kift at hotmail.com> 
>    To: John McKee <johnmckee at cox.net>; detomaso 
>    <detomaso at server.detomasolist.com> 
>    Sent: Sat, Feb 18, 2017 9:53 pm 
>    Subject: Re: [DeTomaso] Tie rod thread size 
>    I believe the tie rods are 14mm x 1.5 thread pitch. 
>    Julian 
>    __________________________________________________________________ 
>    From: DeTomaso <detomaso-[1]bounces at server.detomasolist.com> on behalf 
>    of 
>    John McKee <[2]johnmckee at cox.net> 
>    Sent: Saturday, February 18, 2017 6:57 PM 
>    To: [3]detomaso at server.detomasolist.com 
>    Subject: [DeTomaso] Tie rod thread size 
>    Can anybody tell me the size of the threaded male end of the steering 
>    rack? 
>    I am working on a hemi-joint rod end conversion. 
>    Thanks, 
>    John 
>    _______________________________________________ 
>    Detomaso Email List is not managed by POCA 
>    Posted emails must not exceed 1.5 Megabytes 
>    DeTomaso mailing list 
>    [4]DeTomaso at server.detomasolist.com 
>    [5]http://server.detomasolist.com/mailman/listinfo/detomaso 
>    To manage your subscription (change email address, unsubscribe, etc.) 
>    use the links above. 
>    Members who post to this list grant license to the list to forward any 
>    message posted here to all past, current, or future members of the 
>    list. They also grant the list owner permission to maintain an archive 
>    or approve the archiving of list messages. 
>
> References 
>
>    1. mailto:bounces at server.detomasolist.com 
>    2. mailto:johnmckee at cox.net 
>    3. mailto:detomaso at server.detomasolist.com 
>    4. mailto:DeTomaso at server.detomasolist.com 
>    5. http://server.detomasolist.com/mailman/listinfo/detomaso 
>
> _______________________________________________ 
>
>
> Detomaso Email List is not managed by POCA 
> Posted emails must not exceed 1.5 Megabytes 
> DeTomaso mailing list 
> DeTomaso at server.detomasolist.com 
> http://server.detomasolist.com/mailman/listinfo/detomaso 
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above. 
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.