[DeTomaso] Tie rod thread size
jderyke at aol.com
jderyke at aol.com
Sun Feb 19 03:23:03 EST 2017
Julian is correct; further, it is one of the few metric threads that cross-references to SAE. Our 1/2"-20 fine thread fits. I use SAE jam nuts and SAE heim-joints of that thread in my own steering with zero ill effects. Cheers- J Deryke
-----Original Message-----
From: Julian Kift <julian_kift at hotmail.com>
To: John McKee <johnmckee at cox.net>; detomaso <detomaso at server.detomasolist.com>
Sent: Sat, Feb 18, 2017 9:53 pm
Subject: Re: [DeTomaso] Tie rod thread size
I believe the tie rods are 14mm x 1.5 thread pitch.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
John McKee <johnmckee at cox.net>
Sent: Saturday, February 18, 2017 6:57 PM
To: detomaso at server.detomasolist.com
Subject: [DeTomaso] Tie rod thread size
Can anybody tell me the size of the threaded male end of the steering
rack?
I am working on a hemi-joint rod end conversion.
Thanks,
John
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Julian is correct; further, it is one of the few metric threads that
cross-references to SAE. Our 1/2"-20 fine thread fits. I use SAE jam
nuts and SAE heim-joints of that thread in my own steering with zero
ill effects. Cheers- J Deryke
-----Original Message-----
From: Julian Kift <julian_kift at hotmail.com>
To: John McKee <johnmckee at cox.net>; detomaso
<detomaso at server.detomasolist.com>
Sent: Sat, Feb 18, 2017 9:53 pm
Subject: Re: [DeTomaso] Tie rod thread size
I believe the tie rods are 14mm x 1.5 thread pitch.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-[1]bounces at server.detomasolist.com> on behalf
of
John McKee <[2]johnmckee at cox.net>
Sent: Saturday, February 18, 2017 6:57 PM
To: [3]detomaso at server.detomasolist.com
Subject: [DeTomaso] Tie rod thread size
Can anybody tell me the size of the threaded male end of the steering
rack?
I am working on a hemi-joint rod end conversion.
Thanks,
John
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:bounces at server.detomasolist.com
2. mailto:johnmckee at cox.net
3. mailto:detomaso at server.detomasolist.com
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list