[DeTomaso] FW: Get a group to have the front, top , ball joints trimmed 0.1 inches
Dave Londry
davel at emspace.com
Thu Dec 21 15:48:05 EST 2017
It'll have to get in line Bill.
I have a batch of E60 stuff waiting for the getaroundtoit coupon.
Have a great Xmas
(that's to all and to all a good night).
Dave
On 21/12/2017 12:35 PM, bill at incendium.com wrote:
> Dave:
> Over Christmas project ??
>
>
>
>
> Cheers
> Bill Moore
> Calgary
> 403-860-4300
>
> -------- Original message --------
> From: Dave Londry <davel at emspace.com>
> Date: 2017-12-21 1:07 PM (GMT-07:00)
> To: detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] FW: Get a group to have the front, top , ball
> joints trimmed 0.1 inches
>
> Next time I feel the irresistible need to tear apart the front end of
> 6143, I will send you a pair Julian.
> I have enough tooling to do it, but having the recipe is better.
> Dave
>
>
> On 21/12/2017 9:06 AM, Julian Kift wrote:
> > Depends on your comfort and skill level as it requires
> separating the
> > two halves, straightening one and welding them back together.
> then you
> > need to get longer bolts for the ball joint and fabricate spacers.
> >
> > I think Pat Mical offers them all done on an exchange basis, I have
> > done a few sets and try to pick up any a-arms that come up at
> > reasonable price as cores or have an owner send their a-arms.
> >
> > Julian
> >
> > [cid:11c91c78-5843-4f4a-8316-bb499438ee86]
> > [cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8]
> > [cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac]
> > [cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49]
> > __________________________________________________________________
> >
> > From: Mike & Elizabeth Thomas <mbefthomas at comcast.net>
> > Sent: Thursday, December 21, 2017 6:35 AM
> > To: 'Julian Kift'; 'Joseph F. Byrd, Jr.';
> > detomaso at server.detomasolist.com
> > Subject: RE: [DeTomaso] FW: Get a group to have the front, top ,
> ball
> > joints trimmed 0.1 inches
> >
> > How much work is widening the upper A arm? I'd like to go back to
> > stock
> > suspension bushings, but that would require ditching the offset poly
> > bushings I have upfront and loosing that additional angle.
> > Mike Thomas
> > -----Original Message-----
> > From: DeTomaso
> [[1]mailto:detomaso-bounces at server.detomasolist.com] On
> > Behalf
> > Of Julian Kift
> > Sent: Wednesday, December 20, 2017 8:39 PM
> > To: Joseph F. Byrd, Jr. <byrdjf at embarqmail.com>;
> > detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] FW: Get a group to have the front, top ,
> ball
> > joints
> > trimmed 0.1 inches
> > Well it is pretty critical to stay with 0.1" maximum to avoid
> > breakthrough
> > into the ball joint as they are all a little different. It should
> > provide
> > just over 0.5 degree extra caster.
> > Personally I modify the a-arms, widening them at the ball joint
> > mounting by
> > 3/4", which then allows infinite adjustment with spacers up to about
> > 7.5
> > degrees. The wide body cars like 7 degrees, 5 is good for a narrow
> > body.
> > Julian
> > From: DeTomaso <detomaso-bounces at server.detomasolist.com> on
> behalf of
> > Joseph F. Byrd, Jr. <byrdjf at embarqmail.com>
> > Sent: Wednesday, December 20, 2017 8:34 PM
> > To: detomaso at server.detomasolist.com
> > Subject: [DeTomaso] FW: Get a group to have the front, top , ball
> > joints
> > trimmed 0.1 inches
> > (Sorry Julian)
> > I have not heard that was doable. I casually looked at one and
> my gut
> > feeling was it couldn't be done.
> > Good to know!
> > How much angle would 0.1" give?
> > -----Original Message-----
> > From: DeTomaso
> [[2]mailto:detomaso-bounces at server.detomasolist.com] On
> > Behalf
> > Of Julian Kift
> > Sent: Wednesday, December 20, 2017 23:16 PM
> > To: Ken Green; detomaso at server.detomasolist.com
> > Subject: Re: [DeTomaso] Get a group to have the front, top , ball
> > joints
> > trimmed 0.1 inches
> > Larry Stock has a a well equipped shop and has them already
> milled to
> > ship
> > out to you, zero setup costs!
> > Julian
> > ________________________________
> > From: DeTomaso <detomaso-bounces at server.detomasolist.com> on
> behalf of
> > Ken
> > Green via DeTomaso <detomaso at server.detomasolist.com>
> > Sent: Wednesday, December 20, 2017 7:49 PM
> > To: DeTomaso Mail List
> > Subject: [DeTomaso] Get a group to have the front, top , ball joints
> > trimmed
> > 0.1 inches
> > My understanding is that 0.1 inches can be trimmed off one side to
> > increase
> > caster? Seems like most the work would be setting up the milling
> > machine?
> > Maybe find a shop to get a bunch done, and share the setup cost?
> > Ken
> >
> > References
> >
> > 1. mailto:detomaso-bounces at server.detomasolist.com
> > 2. mailto:detomaso-bounces at server.detomasolist.com
> >
> >
> >
> > _______________________________________________
> >
> >
> > Detomaso Email List is not managed by POCA
> > Posted emails must not exceed 1.5 Megabytes
> > DeTomaso mailing list
> > DeTomaso at server.detomasolist.com
> > http://server.detomasolist.com/mailman/listinfo/detomaso
> >
> > To manage your subscription (change email address, unsubscribe,
> etc.) use the links above.
> >
> > Members who post to this list grant license to the list to forward
> any message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
>
>
> Next time I feel the irresistible need to tear apart the front end of
> 6143, I will send you a pair Julian.
> I have enough tooling to do it, but having the recipe is better.
> Dave
>
>
> On 21/12/2017 9:06 AM, Julian Kift wrote:
>
> Depends on your comfort and skill level as it requires separating the
> two halves, straightening one and welding them back together. then you
> need to get longer bolts for the ball joint and fabricate spacers.
>
> I think Pat Mical offers them all done on an exchange basis, I have
> done a few sets and try to pick up any a-arms that come up at
> reasonable price as cores or have an owner send their a-arms.
>
> Julian
>
> [[1]cid:11c91c78-5843-4f4a-8316-bb499438ee86]
> [[2]cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8]
> [[3]cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac]
> [[4]cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49]
> __________________________________________________________________
>
> From: Mike & Elizabeth Thomas [5]<mbefthomas at comcast.net>
> Sent: Thursday, December 21, 2017 6:35 AM
> To: 'Julian Kift'; 'Joseph F. Byrd, Jr.';
> [6]detomaso at server.detomasolist.com
> Subject: RE: [DeTomaso] FW: Get a group to have the front, top , ball
> joints trimmed 0.1 inches
>
> How much work is widening the upper A arm? I'd like to go back to
> stock
> suspension bushings, but that would require ditching the offset poly
> bushings I have upfront and loosing that additional angle.
> Mike Thomas
> -----Original Message-----
> From: DeTomaso
> [[1][7]mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf
> Of Julian Kift
> Sent: Wednesday, December 20, 2017 8:39 PM
> To: Joseph F. Byrd, Jr. [8]<byrdjf at embarqmail.com>;
> [9]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] FW: Get a group to have the front, top , ball
> joints
> trimmed 0.1 inches
> Well it is pretty critical to stay with 0.1" maximum to avoid
> breakthrough
> into the ball joint as they are all a little different. It should
> provide
> just over 0.5 degree extra caster.
> Personally I modify the a-arms, widening them at the ball joint
> mounting by
> 3/4", which then allows infinite adjustment with spacers up to about
> 7.5
> degrees. The wide body cars like 7 degrees, 5 is good for a narrow
> body.
> Julian
> From: DeTomaso [10]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> Joseph F. Byrd, Jr. [11]<byrdjf at embarqmail.com>
> Sent: Wednesday, December 20, 2017 8:34 PM
> To: [12]detomaso at server.detomasolist.com
> Subject: [DeTomaso] FW: Get a group to have the front, top , ball
> joints
> trimmed 0.1 inches
> (Sorry Julian)
> I have not heard that was doable. I casually looked at one and my gut
> feeling was it couldn't be done.
> Good to know!
> How much angle would 0.1" give?
> -----Original Message-----
> From: DeTomaso
> [[2][13]mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf
> Of Julian Kift
> Sent: Wednesday, December 20, 2017 23:16 PM
> To: Ken Green; [14]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Get a group to have the front, top , ball
> joints
> trimmed 0.1 inches
> Larry Stock has a a well equipped shop and has them already milled to
> ship
> out to you, zero setup costs!
> Julian
> ________________________________
> From: DeTomaso [15]<detomaso-bounces at server.detomasolist.com> on
> behalf of
> Ken
> Green via DeTomaso [16]<detomaso at server.detomasolist.com>
> Sent: Wednesday, December 20, 2017 7:49 PM
> To: DeTomaso Mail List
> Subject: [DeTomaso] Get a group to have the front, top , ball joints
> trimmed
> 0.1 inches
> My understanding is that 0.1 inches can be trimmed off one side to
> increase
> caster? Seems like most the work would be setting up the milling
> machine?
> Maybe find a shop to get a bunch done, and share the setup cost?
> Ken
>
> References
>
> 1. [17]mailto:detomaso-bounces at server.detomasolist.com
> 2. [18]mailto:detomaso-bounces at server.detomasolist.com
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [19]DeTomaso at server.detomasolist.com
> [20]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
> use the li
> nks above.
>
> Members who post to this list grant license to the list to forward any
> message p
> osted here to all past, current, or future members of the list. They
> also grant
> the list owner permission to maintain an archive or approve the
> archiving of lis
> t messages.
>
> References
>
> 1. cid:11c91c78-5843-4f4a-8316-bb499438ee86
> 2. cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8
> 3. cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac
> 4. cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49
> 5. mailto:mbefthomas at comcast.net
> 6. mailto:detomaso at server.detomasolist.com
> 7. mailto:detomaso-bounces at server.detomasolist.com
> 8. mailto:byrdjf at embarqmail.com
> 9. mailto:detomaso at server.detomasolist.com
> 10. mailto:detomaso-bounces at server.detomasolist.com
> 11. mailto:byrdjf at embarqmail.com
> 12. mailto:detomaso at server.detomasolist.com
> 13. mailto:detomaso-bounces at server.detomasolist.com
> 14. mailto:detomaso at server.detomasolist.com
> 15. mailto:detomaso-bounces at server.detomasolist.com
> 16. mailto:detomaso at server.detomasolist.com
> 17. mailto:detomaso-bounces at server.detomasolist.com
> 18. mailto:detomaso-bounces at server.detomasolist.com
> 19. mailto:DeTomaso at server.detomasolist.com
> 20. http://server.detomasolist.com/mailman/listinfo/detomaso
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
> use the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the
> list. They also grant the list owner permission to maintain an archive
> or approve the archiving of list messages.
-------------- next part --------------
It'll have to get in line Bill.
I have a batch of E60 stuff waiting for the getaroundtoit coupon.
Have a great Xmas
(that's to all and to all a good night).
Dave
On 21/12/2017 12:35 PM, [1]bill at incendium.com wrote:
Dave:
Over Christmas project ??
Cheers
Bill Moore
Calgary
403-860-4300
-------- Original message --------
From: Dave Londry [2]<davel at emspace.com>
Date: 2017-12-21 1:07 PM (GMT-07:00)
To: [3]detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] FW: Get a group to have the front, top , ball
joints trimmed 0.1 inches
Next time I feel the irresistible need to tear apart the front end of
6143, I will send you a pair Julian.
I have enough tooling to do it, but having the recipe is better.
Dave
On 21/12/2017 9:06 AM, Julian Kift wrote:
> Depends on your comfort and skill level as it requires separating
the
> two halves, straightening one and welding them back together.
then you
> need to get longer bolts for the ball joint and fabricate
spacers.
>
> I think Pat Mical offers them all done on an exchange basis, I
have
> done a few sets and try to pick up any a-arms that come up at
> reasonable price as cores or have an owner send their a-arms.
>
> Julian
>
> [[4]cid:11c91c78-5843-4f4a-8316-bb499438ee86]
> [[5]cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8]
> [[6]cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac]
> [[7]cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49]
>
__________________________________________________________________
>
> From: Mike & Elizabeth Thomas [8]<mbefthomas at comcast.net>
> Sent: Thursday, December 21, 2017 6:35 AM
> To: 'Julian Kift'; 'Joseph F. Byrd, Jr.';
> [9]detomaso at server.detomasolist.com
> Subject: RE: [DeTomaso] FW: Get a group to have the front, top ,
ball
> joints trimmed 0.1 inches
>
> How much work is widening the upper A arm? I'd like to go back
to
> stock
> suspension bushings, but that would require ditching the offset
poly
> bushings I have upfront and loosing that additional angle.
> Mike Thomas
> -----Original Message-----
> From: DeTomaso
[[1][10]mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf
> Of Julian Kift
> Sent: Wednesday, December 20, 2017 8:39 PM
> To: Joseph F. Byrd, Jr. [11]<byrdjf at embarqmail.com>;
> [12]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] FW: Get a group to have the front, top ,
ball
> joints
> trimmed 0.1 inches
> Well it is pretty critical to stay with 0.1" maximum to avoid
> breakthrough
> into the ball joint as they are all a little different. It should
> provide
> just over 0.5 degree extra caster.
> Personally I modify the a-arms, widening them at the ball joint
> mounting by
> 3/4", which then allows infinite adjustment with spacers up to
about
> 7.5
> degrees. The wide body cars like 7 degrees, 5 is good for a
narrow
> body.
> Julian
> From: DeTomaso [13]<detomaso-bounces at server.detomasolist.com> on
behalf of
> Joseph F. Byrd, Jr. [14]<byrdjf at embarqmail.com>
> Sent: Wednesday, December 20, 2017 8:34 PM
> To: [15]detomaso at server.detomasolist.com
> Subject: [DeTomaso] FW: Get a group to have the front, top , ball
> joints
> trimmed 0.1 inches
> (Sorry Julian)
> I have not heard that was doable. I casually looked at one and
my gut
> feeling was it couldn't be done.
> Good to know!
> How much angle would 0.1" give?
> -----Original Message-----
> From: DeTomaso
[[2][16]mailto:detomaso-bounces at server.detomasolist.com] On
> Behalf
> Of Julian Kift
> Sent: Wednesday, December 20, 2017 23:16 PM
> To: Ken Green; [17]detomaso at server.detomasolist.com
> Subject: Re: [DeTomaso] Get a group to have the front, top , ball
> joints
> trimmed 0.1 inches
> Larry Stock has a a well equipped shop and has them already
milled to
> ship
> out to you, zero setup costs!
> Julian
> ________________________________
> From: DeTomaso [18]<detomaso-bounces at server.detomasolist.com> on
behalf of
> Ken
> Green via DeTomaso [19]<detomaso at server.detomasolist.com>
> Sent: Wednesday, December 20, 2017 7:49 PM
> To: DeTomaso Mail List
> Subject: [DeTomaso] Get a group to have the front, top , ball
joints
> trimmed
> 0.1 inches
> My understanding is that 0.1 inches can be trimmed off one side
to
> increase
> caster? Seems like most the work would be setting up the milling
> machine?
> Maybe find a shop to get a bunch done, and share the setup cost?
> Ken
>
> References
>
> 1. [20]mailto:detomaso-bounces at server.detomasolist.com
> 2. [21]mailto:detomaso-bounces at server.detomasolist.com
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> [22]DeTomaso at server.detomasolist.com
> [23]http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
>
> Members who post to this list grant license to the list to forward
any message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
Next time I feel the irresistible need to tear apart the front end
of
6143, I will send you a pair Julian.
I have enough tooling to do it, but having the recipe is better.
Dave
On 21/12/2017 9:06 AM, Julian Kift wrote:
Depends on your comfort and skill level as it requires separating
the
two halves, straightening one and welding them back together. then
you
need to get longer bolts for the ball joint and fabricate spacers.
I think Pat Mical offers them all done on an exchange basis, I have
done a few sets and try to pick up any a-arms that come up at
reasonable price as cores or have an owner send their a-arms.
Julian
[[1][24]cid:11c91c78-5843-4f4a-8316-bb499438ee86]
[[2][25]cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8]
[[3][26]cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac]
[[4][27]cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49]
__________________________________________________________________
From: Mike & Elizabeth Thomas [5][28]<mbefthomas at comcast.net>
Sent: Thursday, December 21, 2017 6:35 AM
To: 'Julian Kift'; 'Joseph F. Byrd, Jr.';
[[29]6]detomaso at server.detomasolist.com
Subject: RE: [DeTomaso] FW: Get a group to have the front, top ,
ball
joints trimmed 0.1 inches
How much work is widening the upper A arm? I'd like to go back to
stock
suspension bushings, but that would require ditching the offset poly
bushings I have upfront and loosing that additional angle.
Mike Thomas
-----Original Message-----
From: DeTomaso
[[1][7][30]mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of Julian Kift
Sent: Wednesday, December 20, 2017 8:39 PM
To: Joseph F. Byrd, Jr. [8][31]<byrdjf at embarqmail.com>;
[[32]9]detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] FW: Get a group to have the front, top ,
ball
joints
trimmed 0.1 inches
Well it is pretty critical to stay with 0.1" maximum to avoid
breakthrough
into the ball joint as they are all a little different. It should
provide
just over 0.5 degree extra caster.
Personally I modify the a-arms, widening them at the ball joint
mounting by
3/4", which then allows infinite adjustment with spacers up to about
7.5
degrees. The wide body cars like 7 degrees, 5 is good for a narrow
body.
Julian
From: DeTomaso [10][33]<detomaso-bounces at server.detomasolist.com> on
behalf of
Joseph F. Byrd, Jr. [11][34]<byrdjf at embarqmail.com>
Sent: Wednesday, December 20, 2017 8:34 PM
To: [[35]12]detomaso at server.detomasolist.com
Subject: [DeTomaso] FW: Get a group to have the front, top , ball
joints
trimmed 0.1 inches
(Sorry Julian)
I have not heard that was doable. I casually looked at one and my
gut
feeling was it couldn't be done.
Good to know!
How much angle would 0.1" give?
-----Original Message-----
From: DeTomaso
[[2][13][36]mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of Julian Kift
Sent: Wednesday, December 20, 2017 23:16 PM
To: Ken Green; [[37]14]detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Get a group to have the front, top , ball
joints
trimmed 0.1 inches
Larry Stock has a a well equipped shop and has them already milled
to
ship
out to you, zero setup costs!
Julian
________________________________
From: DeTomaso [15][38]<detomaso-bounces at server.detomasolist.com> on
behalf of
Ken
Green via DeTomaso [16][39]<detomaso at server.detomasolist.com>
Sent: Wednesday, December 20, 2017 7:49 PM
To: DeTomaso Mail List
Subject: [DeTomaso] Get a group to have the front, top , ball joints
trimmed
0.1 inches
My understanding is that 0.1 inches can be trimmed off one side to
increase
caster? Seems like most the work would be setting up the milling
machine?
Maybe find a shop to get a bunch done, and share the setup cost?
Ken
References
1. [17][40]mailto:detomaso-bounces at server.detomasolist.com
2. [18][41]mailto:detomaso-bounces at server.detomasolist.com
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[[42]19]DeTomaso at server.detomasolist.com
[20][43]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the li
nks above.
Members who post to this list grant license to the list to forward any
message p
osted here to all past, current, or future members of the list. They
also grant
the list owner permission to maintain an archive or approve the
archiving of lis
t messages.
References
1. [44]cid:11c91c78-5843-4f4a-8316-bb499438ee86
2. [45]cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8
3. [46]cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac
4. [47]cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49
5. [48]mailto:mbefthomas at comcast.net
6. [49]mailto:detomaso at server.detomasolist.com
7. [50]mailto:detomaso-bounces at server.detomasolist.com
8. [51]mailto:byrdjf at embarqmail.com
9. [52]mailto:detomaso at server.detomasolist.com
10. [53]mailto:detomaso-bounces at server.detomasolist.com
11. [54]mailto:byrdjf at embarqmail.com
12. [55]mailto:detomaso at server.detomasolist.com
13. [56]mailto:detomaso-bounces at server.detomasolist.com
14. [57]mailto:detomaso at server.detomasolist.com
15. [58]mailto:detomaso-bounces at server.detomasolist.com
16. [59]mailto:detomaso at server.detomasolist.com
17. [60]mailto:detomaso-bounces at server.detomasolist.com
18. [61]mailto:detomaso-bounces at server.detomasolist.com
19. [62]mailto:DeTomaso at server.detomasolist.com
20. [63]http://server.detomasolist.com/mailman/listinfo/detomaso
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[64]DeTomaso at server.detomasolist.com
[65]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. mailto:bill at incendium.com
2. mailto:davel at emspace.com
3. mailto:detomaso at server.detomasolist.com
4. cid:11c91c78-5843-4f4a-8316-bb499438ee86
5. cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8
6. cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac
7. cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49
8. mailto:mbefthomas at comcast.net
9. mailto:detomaso at server.detomasolist.com
10. mailto:detomaso-bounces at server.detomasolist.com
11. mailto:byrdjf at embarqmail.com
12. mailto:detomaso at server.detomasolist.com
13. mailto:detomaso-bounces at server.detomasolist.com
14. mailto:byrdjf at embarqmail.com
15. mailto:detomaso at server.detomasolist.com
16. mailto:detomaso-bounces at server.detomasolist.com
17. mailto:detomaso at server.detomasolist.com
18. mailto:detomaso-bounces at server.detomasolist.com
19. mailto:detomaso at server.detomasolist.com
20. mailto:detomaso-bounces at server.detomasolist.com
21. mailto:detomaso-bounces at server.detomasolist.com
22. mailto:DeTomaso at server.detomasolist.com
23. http://server.detomasolist.com/mailman/listinfo/detomaso
24. cid:11c91c78-5843-4f4a-8316-bb499438ee86
25. cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8
26. cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac
27. cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49
28. mailto:mbefthomas at comcast.net
29. mailto:6]detomaso at server.detomasolist.com
30. mailto:detomaso-bounces at server.detomasolist.com
31. mailto:byrdjf at embarqmail.com
32. mailto:9]detomaso at server.detomasolist.com
33. mailto:detomaso-bounces at server.detomasolist.com
34. mailto:byrdjf at embarqmail.com
35. mailto:12]detomaso at server.detomasolist.com
36. mailto:detomaso-bounces at server.detomasolist.com
37. mailto:14]detomaso at server.detomasolist.com
38. mailto:detomaso-bounces at server.detomasolist.com
39. mailto:detomaso at server.detomasolist.com
40. mailto:detomaso-bounces at server.detomasolist.com
41. mailto:detomaso-bounces at server.detomasolist.com
42. mailto:19]DeTomaso at server.detomasolist.com
43. http://server.detomasolist.com/mailman/listinfo/detomaso
44. cid:11c91c78-5843-4f4a-8316-bb499438ee86
45. cid:362cc1a8-a76b-4dde-81c8-1020d57a2db8
46. cid:b2a640a6-d1d9-42f2-859b-a3894f7259ac
47. cid:41fd2adb-9e3e-40a8-a0d2-398141cc8a49
48. mailto:mbefthomas at comcast.net
49. mailto:detomaso at server.detomasolist.com
50. mailto:detomaso-bounces at server.detomasolist.com
51. mailto:byrdjf at embarqmail.com
52. mailto:detomaso at server.detomasolist.com
53. mailto:detomaso-bounces at server.detomasolist.com
54. mailto:byrdjf at embarqmail.com
55. mailto:detomaso at server.detomasolist.com
56. mailto:detomaso-bounces at server.detomasolist.com
57. mailto:detomaso at server.detomasolist.com
58. mailto:detomaso-bounces at server.detomasolist.com
59. mailto:detomaso at server.detomasolist.com
60. mailto:detomaso-bounces at server.detomasolist.com
61. mailto:detomaso-bounces at server.detomasolist.com
62. mailto:DeTomaso at server.detomasolist.com
63. http://server.detomasolist.com/mailman/listinfo/detomaso
64. mailto:DeTomaso at server.detomasolist.com
65. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list