[DeTomaso] Any grill mesh reminants laying around?

[Larry Stock]

The grill is actually a brass mesh with a unique kink weave to it and it
is silver soldered to the SS frame and Bezel. A steel mesh will not look
right at all.
Larry Stock

On 8/9/17, 2:25 PM, "DeTomaso on behalf of Mike Drew via DeTomaso"
<detomaso-bounces at server.detomasolist.com on behalf of
detomaso at server.detomasolist.com> wrote:

>   In a message dated 7/31/17 12:39:08 PM,
>   detomaso at server.detomasolist.com writes:
>
>     A previous owner cut holes in the mesh in the top right and left
>     corners for turn signals.  It looks like it won't be too hard to
>     weave in some replacement wire.  Does anyone have some scrap pieces
>     of this stuff?
>
>   Ken,
>   It will be impossible to find wire cloth of the exact same dimensions.
>   However, it isn't hard to get replacement wire that is 99.9% the same;
>   the smart thing is to just replace the whole grille rather than trying
>   to patch it.
>   I got a sample from the Howard Wire Cloth Company, in Hayward CA.
>   www.howardwire.com
>   Ask for
>   2 Mesh
>   .080 wire
>   plain steel
>   It is virtually indistinguishable from the original, but just different
>   enough that you probably can't use it for a patch.
>   Mike
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use
>the links above.
>
>Members who post to this list grant license to the list to forward any
>message posted here to all past, current, or future members of the list.
>They also grant the list owner permission to maintain an archive or
>approve the archiving of list messages.