[DeTomaso] Stoptech rotor scrape

[Mike Drew]

Yikes!

Okay, that's really weird. I would guess you didn't clean up the mounting surface on the front of the hub, and corrosion buildup is preventing the rotor from seating on the hub properly. Either that or the inner bearing race isn't seated properly in the hub, so the hub is sticking out slightly. 

Or, you left the stock spacers in place which offset the caliper inboard?

Don't start filing anything yet. Take it all apart and check everything carefully. I'm betting this is a minor installation error problem, easily resolved. 

Let us know what you find out!

Mike

Sent from my iPad

> On Aug 1, 2017, at 18:54, audionut at hushmail.com wrote:
> 
> So much for trying describe this without photos!  Sorry guys--
> 
> Okay here's 3 angles of the little rotor scratchers on the calipers that appear to be specifically designed to do just that. 
> 
> (It appears also that the rotors are not evenly centered inside the calipers)
> 
> Thanks for the help.
> 
> 
> 
> 
> Sent using Hushmail
> <IMG_3387.JPG>
> <IMG_3388.JPG>
> <IMG_3390.JPG>