[DeTomaso] What says the 'Collective' about a 'Slugger'
Ed Mendez
edducati at mac.com
Tue Aug 1 00:46:20 EDT 2017
What did he do with the rotary? You can get 800 hp out of a rotary with the turbo and it weighs half of an LS. :-)
https://youtu.be/D9pNxV00tpA
If he still had the 13b I'll take it off his hands. :-)
Ed
Sent from my iPhone 6 Plus
> On Jul 31, 2017, at 20:23, Joseph F. Byrd, Jr. <byrdjf at embarqmail.com> wrote:
>
> Interesting....
> If the compressor is "oil locked", I wonder how does spinning about 30 times
> in 1/2 second, cut it off for 1/2 second, before doing it again actually
> helps.
>
> -----Original Message-----
> From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
> Of Jerry Knotts
> Sent: Monday, July 31, 2017 22:06 PM
> To: DeTomaso list new
> Subject: [DeTomaso] What says the 'Collective' about a 'Slugger'
>
> Have been having trouble with my air in my LS powered RX-7. I have
> been through 3 different mechanics and compressors in the last 2 years.
> A good friend and retired mechanic mentioned the other day I might want to
> look into a 'Slugger' in conjunction with my next compressor and dryer
> install. A 'Slugger' is a small electronic device to vary the ground and
> applied voltage to a compressor on initial start of the compressor. He
> claims that the oil will build up and drain back into a low mounted a/c
> compressor after it sits idle for a while. The same location as a GM LS
> install and also a Pantera.
>
> Was wondering if anyone had used one of these devices and if it has been
> successful or not?
>
> Have had consistent problems with the air in the 'P' cars but hasn't been
> attributable to the compressor.
>
>
> They are only about 35 bucks on e-play, so I am thinking about trying to
> save the valves in the new compressor.
>
> Just wondering?
>
> jerry knotts
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use
> the links above.
>
> Members who post to this list grant license to the list to forward any
> message posted here to all past, current, or future members of the list.
> They also grant the list owner permission to maintain an archive or approve
> the archiving of list messages.
> <DESLUGGER.JPG>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
What did he do with the rotary? You can get 800 hp out of a rotary with
the turbo and it weighs half of an LS. :-)
[1]https://youtu.be/D9pNxV00tpA
If he still had the 13b I'll take it off his hands. :-)
Ed
Sent from my iPhone 6 Plus
On Jul 31, 2017, at 20:23, Joseph F. Byrd, Jr.
<[2]byrdjf at embarqmail.com> wrote:
Interesting....
If the compressor is "oil locked", I wonder how does spinning about 30
times
in 1/2 second, cut it off for 1/2 second, before doing it again
actually
helps.
-----Original Message-----
From: DeTomaso [[3]mailto:detomaso-bounces at server.detomasolist.com] On
Behalf
Of Jerry Knotts
Sent: Monday, July 31, 2017 22:06 PM
To: DeTomaso list new
Subject: [DeTomaso] What says the 'Collective' about a 'Slugger'
Have been having trouble with my air in my LS powered RX-7. I have
been through 3 different mechanics and compressors in the last 2 years.
A good friend and retired mechanic mentioned the other day I might want
to
look into a 'Slugger' in conjunction with my next compressor and dryer
install. A 'Slugger' is a small electronic device to vary the ground
and
applied voltage to a compressor on initial start of the compressor. He
claims that the oil will build up and drain back into a low mounted a/c
compressor after it sits idle for a while. The same location as a GM
LS
install and also a Pantera.
Was wondering if anyone had used one of these devices and if it has
been
successful or not?
Have had consistent problems with the air in the 'P' cars but hasn't
been
attributable to the compressor.
They are only about 35 bucks on e-play, so I am thinking about trying
to
save the valves in the new compressor.
Just wondering?
jerry knotts
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[4]DeTomaso at server.detomasolist.com
[5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
<DESLUGGER.JPG>
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[6]DeTomaso at server.detomasolist.com
[7]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. https://youtu.be/D9pNxV00tpA
2. mailto:byrdjf at embarqmail.com
3. mailto:detomaso-bounces at server.detomasolist.com
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. mailto:DeTomaso at server.detomasolist.com
7. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list