[DeTomaso] HVAC Blower Motor Replacement
Julian Kift
julian_kift at hotmail.com
Mon Apr 17 14:27:31 EDT 2017
Garth,
I am trying to think back to when I did this last year. I recall it was tricky to get the assembly out and I think in the end I had to remove the squirrel cage housings along with the motor. If I recall the bottom of the housings have a lip that goes in first and then the screws, so they need a bit of rotating to get out. It's really tight I recall I had to remove the mounting screws from the heater box to allow enough room to get the blower motor assembly out.
There was also a very short ground wire behind the A/C expansion valve that was obscured by the insulting gunk.
The early and late housings are slightly different, is your motor held in place with a half moon plastic clamp?
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Garth Rodericks via DeTomaso <detomaso at server.detomasolist.com>
Sent: Monday, April 17, 2017 9:31 AM
To: DeTomaso Mail List
Subject: [DeTomaso] HVAC Blower Motor Replacement
I need help!
I'm in the middle of replacing my AC blower motor and can't get the darn thing out. I've read a number of old posts as well as Steve Hawkins' article on the Space City Panteras website (http://www.spacecitypanteras.com/techinfo/Blower/) and Rob DuMoulin's articles on dash removal (http://www.panteraplace.com/AC/Rob%20DuMoulin%20Dash.pdf) and heater box removal (http://www.panteraplace.com/AC/Rob%20DuMoulin%20Heater%20Box.pdf), but I cannot get the blower motor out.
Note that I am NOT removing the entire heater box. I've removed my dashboard and I'm trying to remove the blower motor and squirrel cage assembly from the back of the heater box in-car. Unfortunately, I have almost no visibility back there and have to do much of it by feel reaching behind the heater box.
I've removed the 3 screws (6 total) from atop each of the squirrel cage blower housings.
I've also removed the 4 (2 above and 2 below) screws from the "half-moon" clamp around the body of the blower motor.
The whole assembly is still firmly attached to the heater box. Can anyone tell me what I'm missing? What else do I need to do to get the blower motor assembly out?
I'm trying to get this done in the next couple of days to take the car to the Pantera Palooza in Orange County next weekend - my wife said she's not going if the AC doesn't work! Actually, she'll go regardless, but I won't hear the end of it if she's hot and uncomfortable! :)
Thanks!
Garth
#4033
-------------- next part --------------
Garth,
I am trying to think back to when I did this last year. I recall it was
tricky to get the assembly out and I think in the end I had to remove
the squirrel cage housings along with the motor. If I recall the bottom
of the housings have a lip that goes in first and then the screws,
so they need a bit of rotating to get out. It's really tight I recall I
had to remove the mounting screws from the heater box to allow enough
room to get the blower motor assembly out.
There was also a very short ground wire behind the A/C expansion valve
that was obscured by the insulting gunk.
The early and late housings are slightly different, is your motor held
in place with a half moon plastic clamp?
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Garth Rodericks via DeTomaso <detomaso at server.detomasolist.com>
Sent: Monday, April 17, 2017 9:31 AM
To: DeTomaso Mail List
Subject: [DeTomaso] HVAC Blower Motor Replacement
I need help!
I'm in the middle of replacing my AC blower motor and can't get the
darn thing out. I've read a number of old posts as well as Steve
Hawkins' article on the Space City Panteras website
([1]http://www.spacecitypanteras.com/techinfo/Blower/) and Rob
DuMoulin's articles on dash removal
([2]http://www.panteraplace.com/AC/Rob%20DuMoulin%20Dash.pdf) and
heater box removal
([3]http://www.panteraplace.com/AC/Rob%20DuMoulin%20Heater%20Box.pdf),
but I cannot get the blower motor out.
Note that I am NOT removing the entire heater box. I've removed my
dashboard and I'm trying to remove the blower motor and squirrel cage
assembly from the back of the heater box in-car. Unfortunately, I have
almost no visibility back there and have to do much of it by feel
reaching behind the heater box.
I've removed the 3 screws (6 total) from atop each of the squirrel cage
blower housings.
I've also removed the 4 (2 above and 2 below) screws from the
"half-moon" clamp around the body of the blower motor.
The whole assembly is still firmly attached to the heater box. Can
anyone tell me what I'm missing? What else do I need to do to get the
blower motor assembly out?
I'm trying to get this done in the next couple of days to take the car
to the Pantera Palooza in Orange County next weekend - my wife said
she's not going if the AC doesn't work! Actually, she'll go
regardless, but I won't hear the end of it if she's hot and
uncomfortable! :)
Thanks!
Garth
#4033
References
1. http://www.spacecitypanteras.com/techinfo/Blower/
2. http://www.panteraplace.com/AC/Rob%20DuMoulin%20Dash.pdf
3. http://www.panteraplace.com/AC/Rob%20DuMoulin%20Heater%20Box.pdf
More information about the DeTomaso
mailing list