[DeTomaso] Fans and shroud

[Jack Donahue]

Hey Larry - Did you get my letter (offline from The List) regarding my radiator/fans/shroud? If it jams you up - or whatever - I can post it here on The List. 
Jack
#4348
> On Sep 16, 2016, at 11:24 AM, Larry Stock <larrys at panteraparts.com> wrote:
> 
> Hi Jack,
> 
> You should be able to use the fans off the Fluidyne, if not we have our
> Maridyne system fans and our own bracket kit and if you need shrouds for a
> full lie-down system, we have those too. Typically we recommend our half
> Lay forward system which minimizes the thru air turbulence.
> 
> 
> 
> 
> 
> 
>  11041B Defl. Rad. S.S. Lay down for kit $95.00
> 11042B Stainless deflector right $65.00
> 11043B Stainless deflector left $65.00
> 
> 
> 
> 
> 
> 
> 
> 11055B Radiator Puller Fan Shroud SS Mounting brackets set of 3 $125.00
> 11055P PPC Puller Fans & Shroud Assy $325.00
> 
> 
> 
> If the Hall Brass radiator has the stock quick 90 degree hard radiator
> tubes installed, you will not be able to mount a puller fan shroud under
> those tubes, if it has the straight out tubes then you can use 90 degree
> molded rubber hoses to clear the Puller shroud like your Fluidyne.
> 
> Larry Stock
> 
> Pantera Parts Connection LC
> 550 Mallory Way
> Carson City NV 89701
> www.PanteraParts.com
> PH  775-283-4411
> Fax 775-283-4410
> Cell 1-800-DeTomaso 800-338-6627
> 
> 
> 
> 
> 
> On 9/16/16, 9:29 AM, "DeTomaso on behalf of Jack Donahue"
> <detomaso-bounces at server.detomasolist.com on behalf of
> demongusta at gmail.com> wrote:
> 
>> Hey all - A few weeks ago I was talking asking The List about  radiators
>> - all said-and-done, I decided on the Hall radiator, since I wanted
>> brass/copper instead of aluminum.  And, yes Mike Drew, I have to admit
>> itąs because I want to, not necessarily NEED to. It ainąt broke, but I am
>> fixing it(?). Didnąt want to admit that, but...Lol. There really is an
>> ulterior motive, but I just donąt want to mention it right now; but I ran
>> my idea past  Brassworks  - who says they will łbuild-to-suit˛ - but the
>> Hall unit looks to be łtried-and-proven˛.
>> Now - fans. I really donąt know the brand name of my fans, but they are
>> suckers - about 12˛ diameter - and the blades are łcurved˛  -
>> sickle-shaped. The names that been bouncing around are Mariah, SPAL, and
>> Flex-a-lite. I had read someoneąs post about the Flex-a-liteąs since they
>> said they can be - or are - mounted in a shroud that is a perfect match
>> for the Pantera radiator size. I think. And someone offered-up  a part
>> number, but I deleted (or lost) it. All normal for me.
>> So - I am ready for opinions/suggestions:
>> jack
>> #4348
>> _______________________________________________
>> 
>> 
>> Detomaso Email List is not managed by POCA
>> Posted emails must not exceed 1.5 Megabytes
>> DeTomaso mailing list
>> DeTomaso at server.detomasolist.com
>> http://server.detomasolist.com/mailman/listinfo/detomaso
>> 
>> To manage your subscription (change email address, unsubscribe, etc.) use
>> the links above.
>> 
>> Members who post to this list grant license to the list to forward any
>> message posted here to all past, current, or future members of the list.
>> They also grant the list owner permission to maintain an archive or
>> approve the archiving of list messages.
> 
>