[DeTomaso] Top of radiator connected to swirl tank (It doesn't go to the swirl tank)

Guido deTomaso guido_detomaso at prodigy.net
Mon Sep 26 18:03:32 EDT 2016


Many new cars have active deaearation.  It's a requirement on military vehicles. Some say water pumps can suck air, but otherwise yes hard to see where any new air might come from.
GD


      From: Larry - Ohio Time <Larry at OhioTimeCorp.com>
 To: 'Richard Greenblum' <Richard at richardgreenblum.com>; detomaso at server.detomasolist.com 
 Sent: Friday, September 23, 2016 6:55 AM
 Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It doesn't go to the swirl tank)
   
Once you have the air bled out of the cooling system would it be common for
"new air" to accumulate in the top of the radiator?


Larry - Cleveland




-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Richard Greenblum
Sent: Thursday, September 22, 2016 4:52 PM
To: detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It doesn't
go to the swirl tank)

My stupid guess is that it works, if at all, when the system is cool and
pressures have subsided.  The top of the radiator is lower than the tank, so
perhaps the air trapped at the top of the radiator after a heat cycle
travels to the tank.  Either that, or the speed of the water in the tank
while the engine is running creates enough suction that it scavenges the air
(and some water) from the top of the radiator.

If I recall correctly, when I installed my aluminum radiator from PPC 15 or
more years ago, Dennis told me not to worry about that line, it didn¹t do
anything anyway.  I¹ve followed the raising and bleeding procedures since
with no water temp problems (except for erratic gauge readings at times) but
no actual overheating.

Richard
Austin, TX




From:  DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
"Joseph F. Byrd, Jr." <byrdjf at embarqmail.com>
Date:  Thursday, September 22, 2016 at 15:18
To:  'Guido deTomaso' <guido_detomaso at prodigy.net>, 'Chuck and Linda Huber'
<lindahuber at cox.net>, <detomaso at server.detomasolist.com>
Subject:  Re: [DeTomaso] Top of radiator connected to swirl tank (It doesn't
go to the swirl tank)

I am being serious this post...
I couldn't see the pics, but you confirmed how I thought Chuck had plumbed
his tanks.
I agree that way provides active deaeration and it will be one of the few
modifications I plan to include.

Joe

-----Original Message-----
From: DeTomaso [mailto:detomaso-bounces at server.detomasolist.com] On Behalf
Of Guido deTomaso
Sent: Thursday, September 22, 2016 15:59 PM
To: Chuck and Linda Huber; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It doesn't
go to the swirl tank)


This (below) is a genius modification, creating a true active deaeration
system using suction from the water pump to continuously flow water through
the expansion tank, drawing air from the high points in the system.
But how common, how many have built a system like this ?
The TSB modification, which some here ( Tomas? ) have confirmed was likely
incorporated at the factory, connects the relatively high-pressure swirl
tank to the lower-pressure radiator, so I conclude while the engine is
running, nothing is going to flow from the radiator to the swirl tank, it's
not going to actively de-aerate.  Initial fill, I can see it helping.  After
that, I'm scratching my head.
Thanks,
GD

      From: Chuck and Linda Huber <lindahuber at cox.net>
 To: detomaso at server.detomasolist.com
 Sent: Thursday, September 22, 2016 7:27 AM
 Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It doesn't
go to the swirl tank)
  
There is definitely a mod that sucks air from both the swirl tank, and the
top of the radiator into the expansion tank.  The expansion tank is under
suction, and this causes any trapped air to bleed to the expansion tank.

 I did this on my car.

I believe that it does its job, especially of removing any trapped air from
the radiator.

I had to run a new, separate metal hard line down the length of the car from
near the front of the radiator, all the way back up the bulkhead past the
electrics panel, to near the expansion tank.

Here are pictures of my tanks with the appropriate bleed fittings installed.

Chuck


I think Joe was just joking - His Coriolis post confused me...


-----Original Message-----
From: Owen Cooke [mailto:owen at tadhgcooke.com]
Sent: Thursday, September 22, 2016 5:45 AM
To: Julian Kift; Guido deTomaso; detomaso at server.detomasolist.com
Subject: Re: [DeTomaso] Top of radiator connected to swirl tank, was Re:
DeTomaso Digest, Vol 147, Issue 19

Julian

yes you could be right  i need to check it all again


owen cooke



> 
> 
>  On 21/09/2016 22:37, Guido deTomaso wrote:
>>  >
>>  >
>>  > "but my car had bleed pipe from the rad back to the swirl tank"
>>  >
>>  > I'm kinda fascinated by this mod, which I believe is in the TSB's,
>>  > connecting the top of the radiator to the swirl tank with a long
>>  > hose.  Not sure how it works or what it was supposed to do.
>>  >
>>  > With a completely dry system, I can visualise how it would allow the
>>  > radiator to fill completely, as air formerly trapped in the top of
>>  > the radiator would have a path back to the swirl tank, a higher point.
>>  >
>>  > But once the engine is started, water or air is going to move from
>>  > the swirl tank to the radiator, because of pressure difference. Not
>>  > sure this is helpful but maybe isn't harmful.
>>  >
>>  > Most difficult to visualize, if the engine is off and there is air
>>  > in the radiator, can the weight / head / row gee aych of the water
>>  > in the swirl tank push the air into the swirl tank ?  Is there some
>>  > Archimedes rule I'm not seeing here ?
>>  >
>>  > Also did any cars come from the factory this way, was there an
>>  > official path and mounting systems for the hose ? Cable ties ?
>>  >
>>  > Thanks,
>>  >
>>  > Guy D.
>>  >
>>  >


  

_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use
the links above.

Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.




_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the links above.

Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

   
-------------- next part --------------
   Many new cars have active deaearation.  It's a requirement on military
   vehicles. Some say water pumps can suck air, but otherwise yes hard to
   see where any new air might come from.
   GD
     __________________________________________________________________

   From: Larry - Ohio Time <Larry at OhioTimeCorp.com>
   To: 'Richard Greenblum' <Richard at richardgreenblum.com>;
   detomaso at server.detomasolist.com
   Sent: Friday, September 23, 2016 6:55 AM
   Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
   doesn't go to the swirl tank)
   Once you have the air bled out of the cooling system would it be common
   for
   "new air" to accumulate in the top of the radiator?
   Larry - Cleveland
   -----Original Message-----
   From: DeTomaso [mailto:[1]detomaso-bounces at server.detomasolist.com] On
   Behalf
   Of Richard Greenblum
   Sent: Thursday, September 22, 2016 4:52 PM
   To: [2]detomaso at server.detomasolist.com
   Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
   doesn't
   go to the swirl tank)
   My stupid guess is that it works, if at all, when the system is cool
   and
   pressures have subsided.  The top of the radiator is lower than the
   tank, so
   perhaps the air trapped at the top of the radiator after a heat cycle
   travels to the tank.  Either that, or the speed of the water in the
   tank
   while the engine is running creates enough suction that it scavenges
   the air
   (and some water) from the top of the radiator.
   If I recall correctly, when I installed my aluminum radiator from PPC
   15 or
   more years ago, Dennis told me not to worry about that line, it
   didnA^1t do
   anything anyway.  IA^1ve followed the raising and bleeding procedures
   since
   with no water temp problems (except for erratic gauge readings at
   times) but
   no actual overheating.
   Richard
   Austin, TX
   From:  DeTomaso <[3]detomaso-bounces at server.detomasolist.com> on behalf
   of
   "Joseph F. Byrd, Jr." <[4]byrdjf at embarqmail.com>
   Date:  Thursday, September 22, 2016 at 15:18
   To:  'Guido deTomaso' <[5]guido_detomaso at prodigy.net>, 'Chuck and Linda
   Huber'
   <[6]lindahuber at cox.net>, <[7]detomaso at server.detomasolist.com>
   Subject:  Re: [DeTomaso] Top of radiator connected to swirl tank (It
   doesn't
   go to the swirl tank)
   I am being serious this post...
   I couldn't see the pics, but you confirmed how I thought Chuck had
   plumbed
   his tanks.
   I agree that way provides active deaeration and it will be one of the
   few
   modifications I plan to include.
   Joe
   -----Original Message-----
   From: DeTomaso [mailto:[8]detomaso-bounces at server.detomasolist.com] On
   Behalf
   Of Guido deTomaso
   Sent: Thursday, September 22, 2016 15:59 PM
   To: Chuck and Linda Huber; [9]detomaso at server.detomasolist.com
   Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
   doesn't
   go to the swirl tank)
   This (below) is a genius modification, creating a true active
   deaeration
   system using suction from the water pump to continuously flow water
   through
   the expansion tank, drawing air from the high points in the system.
   But how common, how many have built a system like this ?
   The TSB modification, which some here ( Tomas? ) have confirmed was
   likely
   incorporated at the factory, connects the relatively high-pressure
   swirl
   tank to the lower-pressure radiator, so I conclude while the engine is
   running, nothing is going to flow from the radiator to the swirl tank,
   it's
   not going to actively de-aerate.  Initial fill, I can see it helping.
   After
   that, I'm scratching my head.
   Thanks,
   GD
         From: Chuck and Linda Huber <[10]lindahuber at cox.net>
   To: [11]detomaso at server.detomasolist.com
   Sent: Thursday, September 22, 2016 7:27 AM
   Subject: Re: [DeTomaso] Top of radiator connected to swirl tank (It
   doesn't
   go to the swirl tank)

   There is definitely a mod that sucks air from both the swirl tank, and
   the
   top of the radiator into the expansion tank.  The expansion tank is
   under
   suction, and this causes any trapped air to bleed to the expansion
   tank.
   I did this on my car.
   I believe that it does its job, especially of removing any trapped air
   from
   the radiator.
   I had to run a new, separate metal hard line down the length of the car
   from
   near the front of the radiator, all the way back up the bulkhead past
   the
   electrics panel, to near the expansion tank.
   Here are pictures of my tanks with the appropriate bleed fittings
   installed.
   Chuck
   I think Joe was just joking - His Coriolis post confused me...
   -----Original Message-----
   From: Owen Cooke [mailto:[12]owen at tadhgcooke.com]
   Sent: Thursday, September 22, 2016 5:45 AM
   To: Julian Kift; Guido deTomaso; [13]detomaso at server.detomasolist.com
   Subject: Re: [DeTomaso] Top of radiator connected to swirl tank, was
   Re:
   DeTomaso Digest, Vol 147, Issue 19
   Julian
   yes you could be right  i need to check it all again
   owen cooke
   >
   >
   >  On 21/09/2016 22:37, Guido deTomaso wrote:
   >>  >
   >>  >
   >>  > "but my car had bleed pipe from the rad back to the swirl tank"
   >>  >
   >>  > I'm kinda fascinated by this mod, which I believe is in the
   TSB's,
   >>  > connecting the top of the radiator to the swirl tank with a long
   >>  > hose.  Not sure how it works or what it was supposed to do.
   >>  >
   >>  > With a completely dry system, I can visualise how it would allow
   the
   >>  > radiator to fill completely, as air formerly trapped in the top
   of
   >>  > the radiator would have a path back to the swirl tank, a higher
   point.
   >>  >
   >>  > But once the engine is started, water or air is going to move
   from
   >>  > the swirl tank to the radiator, because of pressure difference.
   Not
   >>  > sure this is helpful but maybe isn't harmful.
   >>  >
   >>  > Most difficult to visualize, if the engine is off and there is
   air
   >>  > in the radiator, can the weight / head / row gee aych of the
   water
   >>  > in the swirl tank push the air into the swirl tank ?  Is there
   some
   >>  > Archimedes rule I'm not seeing here ?
   >>  >
   >>  > Also did any cars come from the factory this way, was there an
   >>  > official path and mounting systems for the hose ? Cable ties ?
   >>  >
   >>  > Thanks,
   >>  >
   >>  > Guy D.
   >>  >
   >>  >

   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [14]DeTomaso at server.detomasolist.com
   [15]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use
   the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list.
   They also grant the list owner permission to maintain an archive or
   approve
   the archiving of list messages.
   _______________________________________________
   Detomaso Email List is not managed by POCA
   Posted emails must not exceed 1.5 Megabytes
   DeTomaso mailing list
   [16]DeTomaso at server.detomasolist.com
   [17]http://server.detomasolist.com/mailman/listinfo/detomaso
   To manage your subscription (change email address, unsubscribe, etc.)
   use the links above.
   Members who post to this list grant license to the list to forward any
   message posted here to all past, current, or future members of the
   list. They also grant the list owner permission to maintain an archive
   or approve the archiving of list messages.

References

   1. mailto:detomaso-bounces at server.detomasolist.com
   2. mailto:detomaso at server.detomasolist.com
   3. mailto:detomaso-bounces at server.detomasolist.com
   4. mailto:byrdjf at embarqmail.com
   5. mailto:guido_detomaso at prodigy.net
   6. mailto:lindahuber at cox.net
   7. mailto:detomaso at server.detomasolist.com
   8. mailto:detomaso-bounces at server.detomasolist.com
   9. mailto:detomaso at server.detomasolist.com
  10. mailto:lindahuber at cox.net
  11. mailto:detomaso at server.detomasolist.com
  12. mailto:owen at tadhgcooke.com
  13. mailto:detomaso at server.detomasolist.com
  14. mailto:DeTomaso at server.detomasolist.com
  15. http://server.detomasolist.com/mailman/listinfo/detomaso
  16. mailto:DeTomaso at server.detomasolist.com
  17. http://server.detomasolist.com/mailman/listinfo/detomaso


More information about the DeTomaso mailing list