[DeTomaso] Sanden Compressors noises

[bill gaino]

https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts  
If you want it slick.  www.slickpaint.com  like us on facebookRob, I had to replace the idler bearing on a customer car,It sounded a lot like the compressor, just saying. be sure it is new.  BIll 1362



https://www.facebook.com/pages/slickpaintcom/129049637149634?ref=ts&fref=ts  
If you want it slick.  www.slickpaint.com  like us on facebook


-----Original Message-----
>From: Larry Stock <larrys at panteraparts.com>
>Sent: Sep 15, 2016 11:26 AM
>To: Julian Kift <julian_kift at hotmail.com>, Rob Dumoulin <rob at dumoulins.net>, Pantera Mail List <detomaso at server.detomasolist.com>
>Subject: Re: [DeTomaso] Sanden Compressors noises
>
>I am guessing that the system hasn¹t been flushed and cleaned out
>thoroughly enough. When a compressor blows up the aluminum vains break up
>scattering little bits of metal thought the system. They can get caught in
>the condenser and evaporator. You need may not be able to do a simple
>reverse flush without opening up the entire system to get all the crap out
>of the Evaporator and Condenser if it got that far and in this case it
>sounds like it has.
>Kirk¹s system uses a ³Fitted Belt² pulley system that is a little tricky
>to install, but typically can¹t over stress a compressor nose bearing very
>easily. 
>LARRY
>
>On 9/15/16, 8:02 AM, "DeTomaso on behalf of Julian Kift"
><detomaso-bounces at server.detomasolist.com on behalf of
>julian_kift at hotmail.com> wrote:
>
>>   In my experience it is rare for a compressor to fail, so being on your
>>   third I have to wonder whether the compressor is being over stressed
>>   somehow. Are the belts perfectly aligned? Not many people realize but
>>   the compressor brackets are sold in 1/4" offset increments to align
>>   different compressors.
>>   Julian
>>     __________________________________________________________________
>>
>>   From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
>>   Rob Dumoulin <rob at dumoulins.net>
>>   Sent: Thursday, September 15, 2016 6:04 AM
>>   To: Pantera Mail List
>>   Subject: [DeTomaso] Sanden Compressors noises
>>
>>   I've got the Kirk Evans bulkhead reduction kit and pulley setup that
>>   drives
>>   the compressor from the crank and the alternator from the compressor.
>>   I am
>>   on my third Sanden rotory compressor and this time I had new high and
>>   low
>>   pressure switches installed by an AC shop.
>>   With the compressor off, there are no issues.
>>   With the compressor on, at 2,500 the brand new compressor makes a
>>   metallic
>>   clanking noise.  This is the same noise that occurred before the last 2
>>   compressors failed. The noise builds up and if you let off on the revs,
>>   it
>>   slowly decreases.
>>   Is this noise from over-revving?  Over pressurization?  Defective
>>   compressor?
>>   Any ideas welcome.
>>   Thanks,
>>   Rob
>>_______________________________________________
>>
>>
>>Detomaso Email List is not managed by POCA
>>Posted emails must not exceed 1.5 Megabytes
>>DeTomaso mailing list
>>DeTomaso at server.detomasolist.com
>>http://server.detomasolist.com/mailman/listinfo/detomaso
>>
>>To manage your subscription (change email address, unsubscribe, etc.) use
>>the links above.
>>
>>Members who post to this list grant license to the list to forward any
>>message posted here to all past, current, or future members of the list.
>>They also grant the list owner permission to maintain an archive or
>>approve the archiving of list messages.
>
>
>_______________________________________________
>
>
>Detomaso Email List is not managed by POCA
>Posted emails must not exceed 1.5 Megabytes
>DeTomaso mailing list
>DeTomaso at server.detomasolist.com
>http://server.detomasolist.com/mailman/listinfo/detomaso
>
>To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
>Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.