[DeTomaso] Sanden Compressors noises
shawkins777 at comcast.net
shawkins777 at comcast.net
Thu Sep 15 10:47:10 EDT 2016
Sounds like something rubbing against the firewall.
Steve
----- Original Message -----
From: "Rob Dumoulin" <rob at dumoulins.net>
To: "Pantera Mail List" <detomaso at server.detomasolist.com>
Sent: Thursday, September 15, 2016 8:04:43 AM
Subject: [DeTomaso] Sanden Compressors noises
I've got the Kirk Evans bulkhead reduction kit and pulley setup that drives
the compressor from the crank and the alternator from the compressor. I am
on my third Sanden rotory compressor and this time I had new high and low
pressure switches installed by an AC shop.
With the compressor off, there are no issues.
With the compressor on, at 2,500 the brand new compressor makes a metallic
clanking noise. This is the same noise that occurred before the last 2
compressors failed. The noise builds up and if you let off on the revs, it
slowly decreases.
Is this noise from over-revving? Over pressurization? Defective
compressor?
Any ideas welcome.
Thanks,
Rob
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Sounds like something rubbing against the firewall.
Steve
__________________________________________________________________
From: "Rob Dumoulin" <rob at dumoulins.net>
To: "Pantera Mail List" <detomaso at server.detomasolist.com>
Sent: Thursday, September 15, 2016 8:04:43 AM
Subject: [DeTomaso] Sanden Compressors noises
I've got the Kirk Evans bulkhead reduction kit and pulley setup that
drives
the compressor from the crank and the alternator from the compressor.
I am
on my third Sanden rotory compressor and this time I had new high and
low
pressure switches installed by an AC shop.
With the compressor off, there are no issues.
With the compressor on, at 2,500 the brand new compressor makes a
metallic
clanking noise. This is the same noise that occurred before the last 2
compressors failed. The noise builds up and if you let off on the revs,
it
slowly decreases.
Is this noise from over-revving? Over pressurization? Defective
compressor?
Any ideas welcome.
Thanks,
Rob
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
More information about the DeTomaso
mailing list