[DeTomaso] Fwd: Re: Oil Leak Fixed. What Torque?

[Dave Londry]

With a new polymer gasket, it should pretty much settle after 1 heat cycle.

Cork always seems to compress a bit more.
Dave


On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote:
>     Hey Pantera Guru's,
>     I finally got to my Pantera last night. (work is getting in the way of
>     my fun!!)
>     Simple fix.  ALL my valve cover bolts were loose.  Every one of them.
>     I tightened them all
>     but didn't want to over tighten them.  Anyone know what the correct
>     torque should be?
>     I have roller rockers and the taller Ford Racing valve covers for
>     clearance.
>     Your thoughts?
>     Terry
>
>     "A Purple Heart proves you were smart enough to hatch a plan,
>
>      stupid enough to try it and lucky enough to survive!"
>
>     Terry W. Himes
>
>     JPL Jet Propulsion Laboratory
>
>     Dawn Spacecraft Team
>
>     Rosetta Sequence Team Lead
>
>     Phone: (818) 393-6261
>
>     Cell:     (818) 653-8213
>
>     Fax:     (818) 393-3147
>
>     [1]thimes at jpl.nasa.gov
>
> References
>
>     1.mailto:thimes at jpl.nasa.gov
>
>
>
> _______________________________________________
>
>
> Detomaso Email List is not managed by POCA
> Posted emails must not exceed 1.5 Megabytes
> DeTomaso mailing list
> DeTomaso at server.detomasolist.com
> http://server.detomasolist.com/mailman/listinfo/detomaso
>
> To manage your subscription (change email address, unsubscribe, etc.) use the links above.
>
> Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.

-------------- next part --------------
   With a new polymer gasket, it should pretty much settle after 1 heat
   cycle.

   Cork always seems to compress a bit more.
   Dave
   On 2016-09-14 12:36 PM, Himes, Terry (397C) wrote:

   Hey Pantera Guru's,
   I finally got to my Pantera last night. (work is getting in the way of
   my fun!!)
   Simple fix.  ALL my valve cover bolts were loose.  Every one of them.
   I tightened them all
   but didn't want to over tighten them.  Anyone know what the correct
   torque should be?
   I have roller rockers and the taller Ford Racing valve covers for
   clearance.
   Your thoughts?
   Terry

   "A Purple Heart proves you were smart enough to hatch a plan,

    stupid enough to try it and lucky enough to survive!"

   Terry W. Himes

   JPL Jet Propulsion Laboratory

   Dawn Spacecraft Team

   Rosetta Sequence Team Lead

   Phone: (818) 393-6261

   Cell:     (818) 653-8213

   Fax:     (818) 393-3147

   [[1]1]thimes at jpl.nasa.gov

References

   1. [2]mailto:thimes at jpl.nasa.gov


_______________________________________________


Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
[3]DeTomaso at server.detomasolist.com
[4]http://server.detomasolist.com/mailman/listinfo/detomaso

To manage your subscription (change email address, unsubscribe, etc.) use the li
nks above.

Members who post to this list grant license to the list to forward any message p
osted here to all past, current, or future members of the list. They also grant
the list owner permission to maintain an archive or approve the archiving of lis
t messages.

References

   1. mailto:1]thimes at jpl.nasa.gov
   2. mailto:thimes at jpl.nasa.gov
   3. mailto:DeTomaso at server.detomasolist.com
   4. http://server.detomasolist.com/mailman/listinfo/detomaso