[DeTomaso] Oil Pressure Gauge Part Deux - Mechanical Gauge Test
Mike Thomas
mbefthomas at comcast.net
Sat Sep 3 17:03:48 EDT 2016
Received the mechanical gauge from Mike Drew today (thanks Mike). Put it on and started the motor, and it reads 60 lbs. at start and warm up at 1500 RPM’s, not much less at idle (~900 when the choke lets go(, and only a little more when I rev. That doesn’t seem right. I would expect it to drop pretty low at idle.
Thoughts?
Mike Thomas
From: Richard Greenblum [mailto:richard at richardgreenblum.com]
Sent: Friday, September 02, 2016 7:19 PM
To: Mike Thomas <mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure Gauge
Thanks Mike, I'm going to look him up.
Sent from my iPhone
On Sep 2, 2016, at 18:43, Mike Thomas <mbefthomas at comcast.net> wrote:
Rick Sanchez
From: Richard Greenblum [mailto:richard at richardgreenblum.com]
Sent: Thursday, September 01, 2016 5:53 PM
To: Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> >
Subject: Re: [DeTomaso] Oil Pressure Gauge
Know it well, the zip code is 78154. It's right outside San Antonio and next to Randolph AFB, where I was stationed for most of my Air Force Reserve career. About 60 miles from my house in Austin. I'm sure Michael Frazier knows him.
Sent from my iPhone
On Sep 1, 2016, at 19:38, Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> > wrote:
Actually in a town called Schertz, not sure how close that is to you. Zip is 87154.
Mike
From: Richard Greenblum [mailto:Richard at richardgreenblum.com]
Sent: Thursday, September 01, 2016 7:41 AM
To: Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> >
Subject: Re: [DeTomaso] Oil Pressure Gauge
That wasn’t me, Mike. If there’s another Richard in Austin with a Pantera, I’d like to meet him!
Did you attend the Rally two years ago put on by Space City Panteras?
From: Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> >
Date: Wednesday, August 31, 2016 at 22:17
To: Richard Greenblum <richard at richardgreenblum.com <mailto:richard at richardgreenblum.com> >
Subject: RE: [DeTomaso] Oil Pressure Gauge
Thanks Richard
Are you the same Richard in Texas who just bought my firewall cover?
Mike
-----Original Message-----
From: Richard Greenblum [mailto:richard at richardgreenblum.com]
Sent: Wednesday, August 31, 2016 6:13 PM
To: Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> >
Subject: Re: [DeTomaso] Oil Pressure Gauge
Mike, I obviously can't tell what your problem is from here, but mine did
that for a while. When I tapped on the glass sometimes it would start
working again, sometimes it wouldn't. Then it stopped and has been normal
for a while. I think it's obviously the gauge.
Richard
Austin, TX
Sent from my iPhone
On Aug 31, 2016, at 19:26, Mike Thomas <mbefthomas at comcast.net <mailto:mbefthomas at comcast.net> > wrote:
I'm trying to figure out why I'm getting a pegged reading on my oil
pressure gauge. It will show normal pressure as the car starts, but
soon after pegs to the right and stays there. Everything runs fine
otherwise. I've swapped out the pressure sender, NAPA OP6091, and
it's still pegging, so I'm suspecting the gauge. Anything else I could
check?
Thanks
Mike Thomas
Pres., Panteras Northwest
Yellow '74 #6328
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
DeTomaso at server.detomasolist.com <mailto:DeTomaso at server.detomasolist.com>
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.) use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the list.
They also grant the list owner permission to maintain an archive or approve
the archiving of list messages.
-------------- next part --------------
Received the mechanical gauge from Mike Drew today (thanks Mike). Put
it on and started the motor, and it reads 60 lbs. at start and warm up
at 1500 RPM's, not much less at idle (~900 when the choke lets go(,
and only a little more when I rev. That doesn't seem right. I would
expect it to drop pretty low at idle.
Thoughts?
Mike Thomas
From: Richard Greenblum [mailto:richard at richardgreenblum.com]
Sent: Friday, September 02, 2016 7:19 PM
To: Mike Thomas <mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure Gauge
Thanks Mike, I'm going to look him up.
Sent from my iPhone
On Sep 2, 2016, at 18:43, Mike Thomas <[1]mbefthomas at comcast.net>
wrote:
Rick Sanchez
From: Richard Greenblum [[2]mailto:richard at richardgreenblum.com]
Sent: Thursday, September 01, 2016 5:53 PM
To: Mike Thomas <[3]mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure Gauge
Know it well, the zip code is 78154. It's right outside San Antonio and
next to Randolph AFB, where I was stationed for most of my Air Force
Reserve career. About 60 miles from my house in Austin. I'm sure
Michael Frazier knows him.
Sent from my iPhone
On Sep 1, 2016, at 19:38, Mike Thomas <[4]mbefthomas at comcast.net>
wrote:
Actually in a town called Schertz, not sure how close that is to you.
Zip is 87154.
Mike
From: Richard Greenblum [[5]mailto:Richard at richardgreenblum.com]
Sent: Thursday, September 01, 2016 7:41 AM
To: Mike Thomas <[6]mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure Gauge
That wasn't me, Mike. If there's another Richard in Austin with a
Pantera, I'd like to meet him!
Did you attend the Rally two years ago put on by Space City Panteras?
From: Mike Thomas <[7]mbefthomas at comcast.net>
Date: Wednesday, August 31, 2016 at 22:17
To: Richard Greenblum <[8]richard at richardgreenblum.com>
Subject: RE: [DeTomaso] Oil Pressure Gauge
Thanks Richard
Are you the same Richard in Texas who just bought my firewall cover?
Mike
-----Original Message-----
From: Richard Greenblum [[9]mailto:richard at richardgreenblum.com]
Sent: Wednesday, August 31, 2016 6:13 PM
To: Mike Thomas <[10]mbefthomas at comcast.net>
Subject: Re: [DeTomaso] Oil Pressure Gauge
Mike, I obviously can't tell what your problem is from here, but mine
did
that for a while. When I tapped on the glass sometimes it would start
working again, sometimes it wouldn't. Then it stopped and has been
normal
for a while. I think it's obviously the gauge.
Richard
Austin, TX
Sent from my iPhone
On Aug 31, 2016, at 19:26, Mike Thomas <[11]mbefthomas at comcast.net>
wrote:
I'm trying to figure out why I'm getting a pegged reading on my oil
pressure gauge. It will show normal pressure as the car starts, but
soon after pegs to the right and stays there. Everything runs fine
otherwise. I've swapped out the pressure sender, NAPA OP6091, and
it's still pegging, so I'm suspecting the gauge. Anything else I could
check?
Thanks
Mike Thomas
Pres., Panteras Northwest
Yellow '74 #6328
_______________________________________________
Detomaso Email List is not managed by POCA Posted emails must not
exceed 1.5 Megabytes DeTomaso mailing list
[12]DeTomaso at server.detomasolist.com
[13]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription (change email address, unsubscribe, etc.)
use
the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list.
They also grant the list owner permission to maintain an archive or
approve
the archiving of list messages.
References
1. mailto:mbefthomas at comcast.net
2. mailto:richard at richardgreenblum.com
3. mailto:mbefthomas at comcast.net
4. mailto:mbefthomas at comcast.net
5. mailto:Richard at richardgreenblum.com
6. mailto:mbefthomas at comcast.net
7. mailto:mbefthomas at comcast.net
8. mailto:richard at richardgreenblum.com
9. mailto:richard at richardgreenblum.com
10. mailto:mbefthomas at comcast.net
11. mailto:mbefthomas at comcast.net
12. mailto:DeTomaso at server.detomasolist.com
13. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list