[DeTomaso] carbon fiber doors
gudmund frøland
gudmundfroiland at yahoo.no
Mon Nov 28 02:09:10 EST 2016
I can also confirm these cars are Absolut not identical al? I had an accident and insurance company just ordered a new door from USA. Came to Norway air fright. When it came to the body shop they sanded and primed it prior to install. When installed they was wandering what kind of door this was? It was way of and they had to repair the damaged door. The new one is just sitting in my garage. It was so expensive I thought it was too much just throw away. No Wonder Carbon fiber doors dosent fit :)
--------------------------------------------
Den man 2016-11-28 skrev mark skwarek via DeTomaso <detomaso at server.detomasolist.com>:
Emne: Re: [DeTomaso] carbon fiber doors
Til: "Asa Jay Laughton" <asajay at asajay.com>, "detomaso at server.detomasolist.com" <detomaso at server.detomasolist.com>
Dato: Mandag 28. november 2016 02.10
Personally
I would prefer to get my doors unassembled. (Skin &
frame)
This would make it much
easier to get a proper fit.
Mark
On Sunday, November 27, 2016 7:24
PM, Asa Jay Laughton
<asajay at asajay.com>
wrote:
Don't forget
that the Pantera is a hand-built car. Doors are no
exception to the rule that
every part was hand-fit to the car. Most
likely, the mold made from any
particular door, will still need
massaging to the actual car it will be mounted
on. Just be aware of
that.
The
carbon fiber hoods sold by some Pantera vendors are close,
but
will
need to be hand-fit. They typically let you
know that ahead of time.
Asa Jay
Asa
Jay Laughton - W7TSC, MSgt, USAFR, Retired
& Shelley Marie
Spokane, WA
******************************
[1][1]http://w7tsc.org
[2][2]http://www.teampanteraracing.com
On 11/27/2016 3:08 PM,
[3][3]goodwinpantera at comcast.net
wrote:
Found a company in
Tacoma, Washington that makes carbon fiber hoods,
decklids, and doors but he
would need to keep your door to make a
mold.We would be willing to take on molds for
such a car, but keep in
mind there are a few factors working against
you here. First, our
doors
do not have any side impact
protection. Therefore, they are not
suitable for street use without a roll cage.
Second, we would need
parts
in pristine condition to make molds from. They would not
be
returned to you once the
molds have been made. We own the molds, and
we
keep the parts we make the molds from so we
can back check the molds
if
there is ever a question of
the mold warping or twisting. Third, to
do
any parts, we would require a deposit
equivalent to the full purchase
price of five parts, in advance, before any
work is begun.
The good
news, is that we do not require any charge for the
creation
of
the molds when five parts are purchased in
advance. The lead time is
3-4 months for a set of doors and 2-3 months
for a deck lid or hood.
Greg Shampine
Ultra-Carbon
253-906-8126
I wonder if POCA members want to form a list
then they should contact
this fellow. My doors are full of rust and
would need new door skins
welded on.
_______________________________________________
Detomaso Email List is not
managed by POCA
Posted emails
must not exceed 1.5 Megabytes
DeTomaso mailing list
[4][4]DeTomaso at server.detomasolist.com
[5][5]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription
(change email address, unsubscribe, etc.)
use the li
nks above.
Members who post to this list
grant license to the list to forward any
message p
osted here to all past, current,
or future members of the list. They
also grant
the list owner permission to
maintain an archive or approve the
archiving of lis
t messages.
-----
No virus found in this
message.
Checked by AVG -
[6]www.avg.com
Version:
2016.0.7924 / Virus Database: 4664/13487 - Release Date:
11/27/16
References
1. [6]http://w7tsc.org/
2. [7]http://www.teampanteraracing.com/
3. mailto:[8]goodwinpantera at comcast.net
4. mailto:[9]DeTomaso at server.detomasolist.com
5. [10]http://server.detomasolist.com/mailman/listinfo/detomaso
6. [11]http://www.avg.com/
_______________________________________________
Detomaso Email List is not
managed by POCA
Posted emails
must not exceed 1.5 Megabytes
DeTomaso mailing list
[12]DeTomaso at server.detomasolist.com
[13]http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription
(change email address, unsubscribe, etc.)
use the links above.
Members who post to this list
grant license to the list to forward any
message posted here to all past,
current, or future members of the
list. They also grant the list
owner permission to maintain an archive
or approve the archiving of list
messages.
References
1. http://w7tsc.org/
2. http://www.teampanteraracing.com/
3. mailto:goodwinpantera at comcast.net
4. mailto:DeTomaso at server.detomasolist.com
5. http://server.detomasolist.com/mailman/listinfo/detomaso
6. http://w7tsc.org/
7. http://www.teampanteraracing.com/
8. mailto:goodwinpantera at comcast.net
9. mailto:DeTomaso at server.detomasolist.com
10. http://server.detomasolist.com/mailman/listinfo/detomaso
11. http://www.avg.com/
12. mailto:DeTomaso at server.detomasolist.com
13. http://server.detomasolist.com/mailman/listinfo/detomaso
-----Integrert vedlegg følger-----
_______________________________________________
Detomaso
Email List is not managed by POCA
Posted
emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
To manage your subscription
(change email address, unsubscribe, etc.) use the links
above.
Members who post to
this list grant license to the list to forward any message
posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain
an archive or approve the archiving of list
messages.
More information about the DeTomaso
mailing list