[DeTomaso] Thrust sides of cylinders?
Julian Kift
julian_kift at hotmail.com
Thu Nov 17 16:48:29 EST 2016
Correct, given the rotation it should be the right side of each cylinder when looked at facing forward.
Julian
________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, November 17, 2016 1:22 PM
To: Email List Address For Posting
Subject: [DeTomaso] Thrust sides of cylinders?
All,
I am looking at the sonic testing results of the two bolt Cleveland block I picked up this morning from the machine shop.
I believe the thrust sides of our Clevelands are the outer walls of each cylinder on the passenger side and the inner walls of each cylinder on the driver side.
Can someone confirm if I'm correct on this or not?
Thanks,
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
http://server.detomasolist.com/mailman/listinfo/detomaso
DeTomaso Info Page<http://server.detomasolist.com/mailman/listinfo/detomaso>
server.detomasolist.com
This is the DeTomaso mailing list, a free and open forum for the discussion of issues surrounding all DeTomaso automobiles. This is an unmoderated mailing list ...
To manage your subscription (change email address, unsubscribe, etc.) use the links above.
Members who post to this list grant license to the list to forward any message posted here to all past, current, or future members of the list. They also grant the list owner permission to maintain an archive or approve the archiving of list messages.
-------------- next part --------------
Correct, given the rotation it should be the right side of each
cylinder when looked at facing forward.
Julian
__________________________________________________________________
From: DeTomaso <detomaso-bounces at server.detomasolist.com> on behalf of
Larry Finch via DeTomaso <detomaso at server.detomasolist.com>
Sent: Thursday, November 17, 2016 1:22 PM
To: Email List Address For Posting
Subject: [DeTomaso] Thrust sides of cylinders?
All,
I am looking at the sonic testing results of the two bolt Cleveland
block I picked up this morning from the machine shop.
I believe the thrust sides of our Clevelands are the outer walls of
each cylinder on the passenger side and the inner walls of each
cylinder on the driver side.
Can someone confirm if I'm correct on this or not?
Thanks,
Larry
Sent from me using a magic, handheld electronic gizmo.
_______________________________________________
Detomaso Email List is not managed by POCA
Posted emails must not exceed 1.5 Megabytes
DeTomaso mailing list
DeTomaso at server.detomasolist.com
[1]http://server.detomasolist.com/mailman/listinfo/detomaso
[2]DeTomaso Info Page
server.detomasolist.com
This is the DeTomaso mailing list, a free and open forum for the
discussion of issues surrounding all DeTomaso automobiles. This is an
unmoderated mailing list ...
To manage your subscription (change email address, unsubscribe, etc.)
use the links above.
Members who post to this list grant license to the list to forward any
message posted here to all past, current, or future members of the
list. They also grant the list owner permission to maintain an archive
or approve the archiving of list messages.
References
1. http://server.detomasolist.com/mailman/listinfo/detomaso
2. http://server.detomasolist.com/mailman/listinfo/detomaso
More information about the DeTomaso
mailing list